Furuno NavPilot 711C Autopilot for Outboard Engines

Free Ground Shipping!

Furuno NavPilot 711C Autopilot for Outboard Engines

Stay on course with Furuno’s Navpilot 711C-OB. Self-learning and adaptive software enables the 711C to keep you on course.  With real time dynamic adjustments, your vessels steering becomes more accurate. Bright Colored Day/Night Graphic Display makes viewing easy no matter the time of day.
Pump Required, Sold Separately
  • SKUFU711COB
  • MAN#NAVPILOT 711C OB
  • ID#: 4228
(Rating 86)
Our Price:
$2,645.00
Availability: 
Backorder,
Expected 5/5/2024
Shipping:
Free Ground Shipping!
Condition:
Brand New

Stay on Course with Furuno’s Navpilot 711C OB

When it comes to autopilots Furuno has always been a manufacturer to look at, and with the NAVPILOT 711C for Outboard Engines it is definitely one to view. The 711C for outboards comes complete with Processor, and Control unit as well as an integrated Heading Sensor. The NAVPILOT 711C/OB provides for a dual interface whether NMEA 2000 or Furuno CAN bus which would provide isolation and redundancy for safety, and of course it is NMEA 0183 compatible as well.

The NAVPILOT 711C/OB has a sunlight viewable display that will work on many vessel types. The NAVPILOT uses an adaptive or “self-learning” algorithm that starts with the first dockside setup through the last trip, that then plays a large role in keeping you on course. Call for Help with Marine ElectronicsThis technology takes into consideration a large number of parameters during navigation like: vessel speed, trim, draught, tide and wind effects, dead band (ineffectual rudder movement), weather and more. This information is stored in the system’s memory, and continually optimized to make the NAVPILOT 711C/OB more versatile.

The 711C with its adaptive technology offers you selectable Economy or Precision navigation modes providing power and fuel savings of up to 2.5% and accuracy to 18 feet. For the fisherman the NAVPILOT has a “Fishhunter” Mode, find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NAVPILOT. The NAVPILOT will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB). *Furuno Teleflex Linear Outboard Rudder Reference required for Fishhunter Mode. Sold Separately.

Furuno’s NAVPILOT 711C/OB, with all of its 21st century features and capabilities, is a rock solid option for the Sport Fisherman, with a center console, or the outboard cruiser, who would like a dependable and safe autopilot to make their days on the water more enjoyable.

Please keep in mind a HRP Pumpset is required. Please contact our Sales Department at 1-800-477-2611 so that we can help you choose the right pump for your application. Important things to know: type of steering, number of steering cylinders, steering cylinder part numbers, engine horsepower and boat displacement.

Furuno Navpilot 711C OB Details
Each Furuno Navpilot 711C OB comes with:Furuno FAP7002 Processor Unit, FAP7011C Control Unit, PG700 Integrated Heading Sensor, 6M NMEA2000 Micro Cable, Self Tapping Screws and a Two-Year Warranty.
Furuno Navpilot 711C OB Special Features
  • Color day/night graphic display
  • Selectable "Economy" and "Precision" Navigation Modes
  • Simplified activation set-up by on-screen wizard
  • Precision XTE accuracy: within 18 ft
  • One-touch mode selection

Product Accessories for Furuno NavPilot 711C Autopilot for Outboard Engines

Maretron NMEA 2000 Micro T-Connector Our Price:$24.95
SKU: NM5301

Maretron NMEA 2000 Micro T-Connector

The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.

Maretron NMEA 2000 Female Terminator Our Price:$13.95
SKU: NM5801

Maretron NMEA 2000 Female Terminator

A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

Maretron NMEA 2000 Male Terminator Our Price:$13.95
SKU: NM5501

Maretron NMEA 2000 Male Terminator

The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

Maretron NMEA 2000 Starter Kit Our Price:$179.95
SKU: NM2KSTR

Maretron NMEA 2000 Starter Kit

Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.

Furuno PUMPHRP17-12 Autopilot Pump Our Price:$729.95
SKU: FUXPUMPHRP1712

Furuno PUMPHRP17-12 Autopilot Pump

Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.7 Cubic Inches Per Second For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume

Furuno PUMPHRP11-12 Autopilot Pump Our Price:$729.95
SKU: FUXPUMPHRP1112

Furuno PUMPHRP11-12 Autopilot Pump

Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.1 Cubic Inches Per Second For Ram Sizes of Up to 13 Cubic Inches in Volume

Maretron NMEA 2000 Backbone Cable 10 Meter Was $48.95 $44.95
SKU: NM1708

Maretron NMEA 2000 Backbone Cable 10 Meter

This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

Maretron NMEA 2000 Micro Inline Terminator Was $24.95 $19.95
SKU: NMITCMCF

Maretron NMEA 2000 Micro Inline Terminator

The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.

Maretron NMEA 2000 Power-Tee Our Price:$49.95
SKU: NM1801

Maretron NMEA 2000 Power-Tee

The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.