The Garmin GMI 10 Marine Instrument Display can display Depth, Water Speed, Water Temp, fuel flow and engine data. The GMI10 by Garmin.
The Garmin GMI 10 Marine Instrument Display gives the user a choice of what information they want to see on one display. By connecting the GMI 10 to your Garmin family network or optional Smart Sensor through either NMEA 2000 or NMEA 0183, you will be able to see data such as Depth, Speed, water temperature, fuel flow, fuel level or wind direction depending on what sensors are connected to the display or on the network.
You will be able to see all of your data very easily on the 3.5” QVGA Color Display with 320 x 240 resolution. The display can be flush mounted and is completely waterproof to IPX7 standards.
|
| |
| |
|
| |
| |
NM5301
|
NMEA 2000 Micro T-Connector
A NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
|
$29.95
|
|
| |
NM5801
|
NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the Backbone cable. It should be installed on one side of a Micro-Tee.
|
$19.95
|
|
| |
NM5501
|
NMEA 2000 Male Terminator
A NMEA 2000 Female Terminator is used to begin or end the Backbone cable. It should be installed on one side of a Micro-Tee.
|
$19.95
|
|
| |
| |
|
| |
| |
|
| |
| |
|