The Lowrance Point-1 is a 10Hz NMEA 2000 GPS WAAS antenna with high sensitivity for signal acquisition, with incredible position accuracy. Compatible with lowrance HDS models, it updates 10 times per second for the more accurate speed, course and off-track error. The Point-1 is also compact in size, waterproof and easy to flush-mount.

 

Built into the Point1 is a electronic compass that provides accurate heading, improved Course Over Ground at low speeds and with this data the HDS can display radar overlay on the chart with your compatible Lowrance radar.

 

To Connect the Point-1 to any HDS unit you will just need to connect it though NMEA 2000 for plug and play use. If you do not have a NMEA 2000 network on the boat, one will be required and can easily be added by purchasing a NMEA 2000 starter kit.


***NMEA 2000 Network Required for HDS models.

***Replacement for LGC-4000

Lowrance Point-1 GPS Antenna

If you are mounting a Lowrance HDS under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.
NVX11047001   MAN#: 000-11047-001   ID#: 3611
Our Price: $199.95
Availability: Backorder, Expected on 4/25/2014
Condition: Brand New
Review and Rate this Item

Product Accessories for Lowrance Point-1 GPS Antenna

The Lowrance NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.
NVX12469
$69.95
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
NM1703
$31.95
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
NM1701
$25.95
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
NM1704
$39.95
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
NM1702
$26.95
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
NM5801
$12.95
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
NM5501
$12.95
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
NM5301
$23.95
A Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network.
NM1801
$47.95