Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
Category
Mounts & Brackets
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Active Phone charger is a must have*. Not only will you be able to secure your phone easily with one hand but you will also not have wires hanging around to catch on things. This 10W charger is up to 60% faster than previous models, even in high temperatures!
Shipping!
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
in 3-5 Days
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
Shipping!
Garmin Heavy Duty Transom Mount with Spray Shield
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
Shipping!
Shakespeare 4365 4" SS GPS antenna mount
Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
Shipping!
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
Expected 3/21/2024
Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.
Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with Furuno DRS4W Wireless Radar and SiTex T760 Radars.
in 3-5 Days
Shipping!
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
Expected 3/20/2024
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
Shipping!
The Nose Cone with Transducer Mount allows you to replace the standard part of your Force Kraken trolling motor or to install a compatible Garmin transducer, compatible transducers listed below.
Expected 3/21/2024
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
Looking for a replacement or additional mount for your 4" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with Garmin echoMAP 43/44dv, echoMAP CHIRP 42/43/44/45dv and echoMAP Plus 42/43/44/45cv models.
in 3-5 Days
Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.
in 3-5 Days
The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Shipping!
Scanstrut's 10W Nest wireless charger both charges your phone and secures it! This upgraded 10W charger is up to 60% faster than previous versions! IPX6 waterproof rated and Qi certified- the Nest is designed for marine use and easily integrates into consoles, seating, cabinetry and other locations.
in 3-5 Days
Shipping!
The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.
Shipping!
Shakespeare 4700 6-Inch SS Extension
Shakespeare 4700-1 12 inch SS Extension
Flush Mount Kit for Garmin 400 Series.
in 3-5 Days
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Shipping!
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
Furuno Display Mounting Knob - 2 pieces required
in 3-5 Days
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
in 3-5 Days
Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
in 3-5 Days
Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.
in 3-5 Days
Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.
in 3-5 Days
Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.
Flush Mount Kit for Garmin GPSMAP 7x1 / 7x1xs & echoMap 70 Series.
in 3-5 Days
Garmin Flat Mount kit for echoMap 70 series and GPSMAP 7x1 / 7x1s series. Give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
in 3-5 Days
Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.
in 3-5 Days
Second Mounting Station for Garmin GPSMAP 7X1/7X1s and echoMap 70s Series. Bracket and Wiring harness included.
in 3-5 Days
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
Garmin Trolling Motor Mount for 4 and 8 Pin Transducers.
in 3-5 Days
The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.
in 3-5 Days
The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.
in 3-5 Days