Premium Marine Gauge with NMEA 2000!
The VMH-35 is sleek multifunction marine display for monitoring single inboard or outboard engine applications. The stylish black-glass design with brushed stainless-steel ring will fit in nicely with your electronics suite. A bright, sunlight readable color 1.44” TFT display features a sleek stainless-steel bezel. The built in GNSS GPS receiver boasts a 2.5m accuracy and provides GPS speed, compass, and position data. IPX7 protection rating from the front and back to ensure the best performance in harsh weather conditions. The VMH 35 has an embedded GNSS receiver to support and show navigation information, while monitoring analogue input directly, such as fuel, trim, and tachometer. Analog inputs for older engines or via built in NMEA 2000 Gateway eliminating need for a convertor.
Even in smaller vessels or cockpits with limited space the VMH 35 displays key information such as Rudder Angle, Trim Coolant, Engine Speed (RPM), Seawater Temperature to name a few. A special input is dedicated to the Veratron IBS (Intelligent Battery Sensor- It can provide critical 12V battery monitoring information). All these data are distributed to NMEA 2000® thanks to its embedded certified gateway.
Veratron VMH-35 NMEA 2000 Color Display with GPS Box Contents
Each Veratron VMH-35 NMEA 2000 Color Display with GPS Comes with:
- VMH-35 Marine Display
- Wire Harness
- Intelligent Battery Sensor
- Pole Adapter
- 2-Year Warranty
Veratron VMH-35 NMEA 2000 Color Display with GPS Key Features
- Stylish Black-Glass Design with Brushed Stainless-Steel Ring.
- New Generation Sun-Readable Color Hybrid Display.
- Intelligent Battery Sensor (IBS) Port.
- Analog to NMEA 2000 Gateway.
- Integrated High-Performance GNSS Receiver.
- Size: 100mm (Outer), 85mm (Mounting Hole)
Veratron VMH-35 Manual Click Here
Product Accessories for Veratron VMH-35 NMEA 2000 Color Display with GPS
Our Price:$24.95
SKU: NM5301
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Our Price:$31.95
SKU: NM1702
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Our Price:$31.95
SKU: NM1703
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Our Price:$13.95
SKU: NM5501
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$179.95
SKU: NM2KSTR
Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.
Our Price:$29.95
SKU: NM1701
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Our Price:$29.95
SKU: NM1702M
Maretron NMEA 2000 Backbone/Drop Cable 2 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.
Our Price:$13.95
SKU: NM5801
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$48.95
SKU: NM1708
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$39.95
SKU: NM1704
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Our Price:$20.95
SKU: NMFACFST
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$20.95
SKU: NMFACMST
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Was
SKU: NMITCMCF
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Our Price:$49.95
SKU: NM1801
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
SKU: VR109901
Veratron VMH-14 Multifunction Color Display
The VMH-14 instrument is designed to be easily configured to suit your needs. This sunlight readable display supports a variety of data types received from any VMH or OceanLink master device. Every master device can control up to 16 VMH-14 displays.
Master device required, sold separately
