Marine Accessories

Lowrance B60 20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Works on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)

The Sitex Transom Mount Dual Frequency, 600W Transducer provides accurate depth, speed and temperature readings to your Sitex CVS-126, CVS-1410, SVS-650 fishfinder, SVS560CF or SVS-760CF.
(Depth/Speed/Temp)

Airmar Kick Up Bracket for P66 transom mount transducer(replacement). Works with any Airmar P66 transducer.

The Speco 5" x 8" Weatherproof PA Speaker is a high quality hailer horn with 8 Ohm impedance. Constructed from white ABS plastic with stainless steel mounting hardware, the Speco is top quality at an affordable price.

This Furuno cable is dual purpose it is the Power Cable for an FCV 620/585 and also the NMEA 0183 for GP33. Cable will not provide power to a GP-33.

Standard Horizon CMP460 Intrinsically Safe Submersible Remote Speaker Mic

Standard Horizon 23' Extension for RAM Mic.

The Furuno AIR-033-204 Adapter Cable adapts 8-Pin Furuno Transducers to Furuno Fishfinders with 10-Pin Transducer Connector. Length: 1 Meter.

Garmin NMEA 0183 Power/Data Cable

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

Stainless Steel Clam Shell, Large 2.25" W x 2.25" L

Display cover for HDS10 Chartplotter & Chartplotter/Fishfinder units.
**NOT COMPATIBLE WITH PRO SERIES**

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 3 Meter.

Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm

Network two Raynet devices together with the Female/Female Cable. Length 10M

The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.

Raymarine SeaTalkNG T-piece connector.

Raymarine Replacement Rudder Reference Transducer compatible with Raymarine and Autohelm autopilot systems.

Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.

The Raymarine SeaTalk NG Starter Kit includes all the pieces necessary to create a SeaTalk NG network on your boat.

10' Transducer Extension Cable for  X Sonic transducers, LSS1, LSS2 Structure Scan, TotalScan and 3-in-1 Transducers.

If you are mounting a Lowrance HDS or Elite-7 under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.

Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs

NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.

Simrad NSE/NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.

Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.

Lost or Missing Protective Cover for your GPSMAP 5x7, 5x7xs or echoMap 50s Series? The Garmin 010-11971-00 is the exact protective cover that came with your unit originally.

Looking for a replacement surface mount for your GPSMAP 720/740 series GPS Plotter/Sounder units. Garmin's 010-11483-00 is the exact mount that came with your unit originally. Includes Bail Mount and Knobs.

Raymarine's Seatalk NG Terminator is used to begin or end your Seatalk NG Network Backbone.

Network two Raynet devices together with the Female/Female Cable. Length 400mm

Icom HM165 IPX7 Waterproof Rated Speaker Mic for M34/M36 and M93/M94D. Rugged Design.

The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.

Raymarine A80007 Raynet Network Switch is the central connection point for SeaTalkhs data that uses Raynet connectors. Connect multiple (up to 5) Raynet devices together with the Raymarine A80007. *This is not compatible with SeaTalkHS devices with RJ45 connectors.

Lumishore's SMX11 Surface Mount Underwater LED Lights add bright underwater lighting to your vessel and are easy to install. Perfect for above or below the water line, the SMX-11 provides 60 degrees of light while only drawing 1 amp current from 12v.

Garmin 8-Pin 30' Transducer Extension Cable.

Simnet to Micro-C (male) cable used to connect Simnet to NMEA 2000 backbone, .5 meter in length.

New high capacity 3200 mAh SBR-45LI Lithium-Ion battery for Standard Horizon HX400 Handheld VHF. (replaces old part number FNB-V115LI/SBR-29LI)

Furuno's FI5002 6-Port Junction Box supports both 12VDC and 24VDC Networks, has 2 NMEA2000 backbone ports and allows up to 6 NMEA2000 components to be networked together.

Furuno Display Mounting Knob - 2 pieces required.

Furuno's TZTL15F Bracket Mount and Knobs. Mount your TZTouch 2 15" display to a flat surface with this bracket with adjustable angle for optimum viewing.

Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.

Flush Mount your Garmin STRIKER 7 and STRIKER Plus 7 with this kit. Includes Mounting Template, Hardware and Instructions.

Standard Horizon DC Cable with 12v Cigarette Lighter Plug. Compatible with HX100, HX150, HX210, HX290, HX380S, HX751, HX851, HX870 and HX890. (Charges thru cradle that was included with your radio)

Garmin Protective Cover for 9" echoMAP units. Compatible with Garmin echoMAP 93sv, 94sv, echoMAP CHIRP 92sv, 93sv,94sv and 95sv. Does not work with PLUS or UHD models

Icom BC-217SA/SE USB Charger for M25 and M37.  Charge your Icom M25 or M37 Handheld VHF in 3 hours from a 110v outlet using the BC 217SA.

Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.

Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.

Garmin adapter cable connects a 4-pin transducer to a 8-pin sounder.