Free 2-Day Shipping on Thousands of Items!
Navico 10-Foot 12-PIN Transducer Extension cable for StructureScan 3D Module and 3D Bundles. Includes 2 10' (3M) cables.
Furuno's MCU004 Remote provides Keyed Operation of the TZtouch and TZtouch2 and TZTouch3 displays. 10 Hardware Keys consisting of Large rotary knob with Joystick and 8 hard buttons provide near complete control of your TZtouch setup.
Garmin Spray Shield for DownVu/SideVu Transducers
Flush Mount your Garmin GPSMAP 722, 722xs, 742 or 742xs with the 010-12546-00 Flush Mount Kit. Includes Hardware, Template and Installation Instructions.
Furuno F-Type (Front Mount) Flush Mount Kit for Furuno GP39
Furuno S-Type (Side Mount) Flush Mount Kit for Furuno GP39
Garmin NMEA 2000 Multiport T-Connector.
Protect your Lowrance Link-6 VHF Marine Radio with the 000-14054-001 Suncover.
Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and UHD 72cv, 73cv, 74cv and 75cv.
7" echoMAP Plus and echoMAP UHD ClearVu (cv) Models only!
Protect your Lowrance HOOK2 and HOOK Reveal 5" Display from the elements with this Sun Cover. Compatible with 5" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 5" Displays.
Protect your Lowrance HOOK2 12" Display from the elements with this Sun Cover. Compatible with 12" HOOK2 TripleShot units.
Lowrance 10' Transducer Extension for Hook2 SplitShot and TripleShot Transducers. Compatible with Lowrance Hook2/Hook Reveal 5", 7" and 9" Splitshot and TripleShot GPS / Fishfinders as well as 5", 7" and 9" Simrad Cruise Units.
Icom MBF-5 Flush Mounting Bracket for M330 Series VHF Radios.
The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.
The Raymarine STng (Male) to DeviceNet (Female) snap-on spur adaptor allows for easy connection to NMEA2000 devices.
Pair the HV-100+ Transom Mount transducer with your Raymarine element for excellent underwater images and water temperature. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat!
The ACR RCL-85 LED Searchlight with 240,000 candela using 6 High Flux (30W) LED’s provide over 1/2 nm of lighting. Simple Install – connect to 12 to 24 volt power and you’re ready to go! Includes wireless handheld remote to rotate light 350°.
The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
Garmin Cigarette Lighter Adapter for echoMAP/Striker units with a 4 Pin Power Cable.
Garmin's ECHOMAP Plus 7xsv Boat kit comes with everything you need for a second station setup. Includes GT52HW-TM Transducer, Tilt/swivel mount with quick-release cradle and Power/data cable.
Garmin's ECHOMAP Plus 9xsv Boat kit comes with everything you need for a second station setup. Includes GT52HW-TM Transducer, Tilt/swivel mount with quick-release cradle and Power/data cable.
Standard Horizon;s SSM-64A offers an Over the head headset with Boom mic, option to setup for PTT (Push to Talk) operation or VOX (voice activated transmit). Compatible will all Standard Horizon models with a speaker mic connection on the radio.
The Seaview Mast Mount provides a very sturdy platform for your compatible radar.
Pair your Panoptix Livescope LVS32 transducer with the Perspective Mode Mount and see below the surface like never before! Now you can see what's out front and what's around your boat with an overhead view point.
The SCX21 with NMEA0183 connections from Furuno provides reliable and accurate heading to your NMEA 0183 devices. Four separate GNSS antennas provide Accurate heading info allowing your Furuno Autopilot to keep a better course, saving time, fuel, and money while the precise pitch, roll, and heave information stabilizes the display for many Furuno Fish Finders and Sonars.
The SBH-36 is the replacement cradle for the Standard Horizon HX400 and HX400IS radios. The SBH-36 requires the use of the SAD-25B charging cable (not included and sold separately).
Garmin’s GPS24XD HVS GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes NMEA0183 Bare wire connection, under-deck, pole and surface mount options.
Protect your Garmin GPSMAP 10x2 series GPS display from scratches and sun when not in use!
Protect your Garmin GPSMAP 8x12 series GPS display from scratches and sun when not in use!
Protect your Garmin GPSMAP 8x10 series GPS display from scratches and sun when not in use!
Protect your Raymarine Axiom/Axiom+ 9 from scratches and sun when not in use- for trunnion mounting.
Protect your Lowrance HDS 9 LIVE display from scratches and sun when not in use!
Protect your Lowrance HDS 12 LIVE when not in use!
Protect your Simrad NSS12 Evo3 and Evo3S displays from scratches and sun when not in use!
Furuno Display/Protective Cover for GP33 and RD33 Displays.
The Standard Horizon SBR-41LI is a 1750mAh lithium Ion replacement battery for the Standard Horizon HX280/380 radios.
The Garmin Power Cable for inReach Mini provides a convenient power option! One end features a MicroUSB connection and the other contains bare wire power/ground leads.
The Seaview Large Grey Plastic Cable seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview Small Polished Stainless Steel Cable seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview Large Stainless Steal Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
The Garmin Power Actuator Cable is required when connecting a third party pump to a Garmin autopilot.
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
Furuno Pole Mount for SCX20 and SCX21 Satellite Compass.
Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units
The Seaview Aft Raked Radar Mounting Base is both stylish and sturdy. Add a Seaview Radar Plate for a complete mount solution.
Radar Plate Required and Sold Separately
The Seaview Modular Plate for Dome Radars in Black provides you with sturdy base on which to mount your radar. The Seaview plate is designed to be mounted to a Seaview Base Mount.
