Free 2-Day Shipping on Thousands of Items!
Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units
The Seaview Aft Raked Radar Mounting Base is both stylish and sturdy. Add a Seaview Radar Plate for a complete mount solution.
Radar Plate Required and Sold Separately
The Seaview Modular Plate for Dome Radars in Black provides you with sturdy base on which to mount your radar. The Seaview plate is designed to be mounted to a Seaview Base Mount.
The Furuno DRS AX and NXT Signal/Power Cable is compatible with Furuno DRS AX and DRS NXT Radars. The Furuno Signal/Power Cable is a required component for your Furuno radar.
Size: 15M
The Raymarine AR200 Augmented Reality Sensor features a Global Navigation Satellite Systems (GNSS) Receiver and Attitude Heading Reference System (AHRS) sensor and provides position, heading, pitch and roll information to compatible Raymarine displays. The AR200 also provides augmented reality features to your compatible Raymarine Axiom display.
Order Now Through July 7, 2024 and Get Up To $3,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus using this Garmin adapter plate.
The Scanstrut Flip Pro is 12V or 24V input and is equipped with 1 Type A and 1 Type C port, providing options in the best connection and power for your device. The Flip Pro is small in size, IPX4 waterproof rated and includes a protective cap that springs closed and locks open when charging.
Display Cover for 7" ECHOMAP UHD2 SV units - 72SV, 73SV and 74SV GPS/Fishfinders.
Does Not work with Garmin 7" Echomap Plus, UHD or UHD2 'cv' units
The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 9-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.
Display Cover for 6" ECHOMAP UHD2 SV units - 62SV, 63SV and 64SV GPS/Fishfinders.
The Garmin 2-Pin Threaded Power Cable is compatible with ECHOMAP UHD2 6-Inch, 7-Inch SV and 9-Inch Displays and measures 6 feet long.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
Standard Horizon SSM 72H RAM 4X Wireless Mic and SCU30 Value Bundle includes the Standard Horizon SSM72H Wireless RAM4X Microphone and SCU-30 Wireless Access Point, compatible with the Standard Horizon GX2400 VHF Radio.
Instant Savings with Value Bundle!
The Garmin marine network adapter cable converts small (male) network cable to a large network connector in order to connect to your compatible Garmin chartplotter.
The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Starlink Not Included, Sold Separately
The Ocean Signal EPIRB3 Category 2 (manual release) EPIRB includes a manual release bracket and includes an integrated AIS alert, visible light and IR strobe and support for EPIRB monitoring via smartphone app. Return Link Service adds peace of mind that your message has sent successfully. Whether you’re fishing, working or sailing offshore- the EPIRB3 is an important addition to your safety equipment.
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
Protect your motor and blade from impact with the skeg for Force Kraken trolling motors.
Select Color Below.
The Garmin Marine Network Adapter cable connects a small marine connector network cable (female) to a large connector network cable (female). The small connector side of the cable features a right angle making it easier to route cabling.
Position your LiveScope XR LVS62 with the 0-degree pole mount for optimal viewing!
The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The SiTex AIS Zero Loss Antenna Splitter Module allows for full use of VHF communications and AIS send/receive with a single VHF antenna. The MDA-3 is designed for use with Class B AIS Transceivers.
Add the Garmin Power Receptable to your compatible Garmin Force trolling motor to add a 70A power receptacle.
The Garmin BlueNet 30 Gateway allows legacy Garmin marine devices to network with Garmin BlueNet network units.
The Garmin BlueNet 20 Switch increases the number of network ports in a Garmin BlueNet network. Expand your high-speed network with the BlueNet 20 Switch!
The Raymarine RNS-8 is a network switch allowing for easy networking of your compatible Raymarine components. This 8 port Gigabit RayNet network switch includes 4 dedicated power-over-ethernet (POE) ports. Integrate Axiom displays with radars, sonar modules and FLIR thermal cameras with ease!
Order Now Through July 7, 2024 and Get Up To $3,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!
Garmin Bail Mount with Quick Release for Echomap Ultra 2 12" Displays. Compatible with echomap Ultra 2 122sv & 126sv.
Protective cover for Garmin Echomap Ultra 2 10" Displays. Compatible with Echomap Ultra 2 Displays Only!
The Sionyx Vinyl Cover is designed specifically for the Nightwave camera and features a tightening strap for a snug, secure fit. The cover provides long-lasting protection against water, dust and UV rays.
Color: White
Airmar plastic isolation ring for SS75 transducers.
Mount your compatible 1kW transom mount transducer with the transom mount bracket kit. This high performance bracket is compatible with the Airmar TM258, TM260, TM265, TM270W and TM275C housings.
Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Icom 12 volt Cigarette Lighter compatible with Handheld charging bases BC119N, 160, 191, 193, 213.
Furuno NavNet Hub Adapter Cable, 6P(M) - RJ45(M), 0.5 Meters
Furuno NMEA Cable, 1 x 7 Pin Connector, 5 Meters
Shakespeare 4700-1 12 inch SS Extension
Flush Mount Kit for Garmin 400 Series.
The Furuno HUB101 is the center of your NavNet 3D system or TZTouch/TZTouch2 Systems connecting all of your displays and components together and allowing for the distribution of information across the network.
The ACR RapidDitch Express Bag is a buoyant abandon ship survival gear bag designed for a worse case scenario boat exit. Large enough to store your Epirb and other safety equipment.
Icom AT 140 HF Automatic Antenna Tuner.
The Icom OPC1147 is a shielded control cable used to connect the AT140 tuner to the Icom M802 Single Side Band Radio.
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Fusion Y Cable for connecting multiple WR600 wired remotes to a 600 series stereo
Fusion 6 meter extension cable for connecting WR600 wired remotes to a 600 series stereo.
Standard Horizon B60 20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp is designed to work on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block.
(Depth/Temp)
Sitex B60-20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Designed for boats with deadrise between 16 and 24 degrees. For SVS560CF, SVS650, CVS126, CVS128, CVS1410 and SVS-760CF. Does not need Fairing Block
(Depth/Temp)
