Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Shipping!
Free 2-Day Shipping on Thousands of Items!
Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Icom 12 volt Cigarette Lighter compatible with Handheld charging bases BC119N, 160, 191, 193, 213.
Furuno NMEA Cable, 1 x 6 Pin Connector, 5 Meters.
Shakespeare 4700 6-Inch SS Extension
Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.
The Standard Horizon FBA-38 Alkaline Battery Tray allows you to use AAA batteries in your HX851S, HX850S, HX760S, HX751S or HX750S handheld VHF radio.
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
This Furuno Cable will allow you to connect two network units together or connect to a network hub. 2M total length with RJ45 connectors on both ends.
The Poly-Planar MB21 Waterproof VHF Speaker is perfect for any open or express boat where noise is a concern. This 2" speaker provides clear sound from your fixed mount vhf.
Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
The Speco 5" x 8" Weatherproof PA Speaker is a high quality hailer horn with 8 Ohm impedance. Constructed from white ABS plastic with stainless steel mounting hardware, the Speco is top quality at an affordable price.
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
Furuno Power Data Cable for GP31, GP32 and GP37.
Lowrance P79 Plastic In-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The in-hull transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees. 50/200khz Transducer.
Standard Horizon 23' Extension for RAM Mic.
Icom MB132 Flush Mounting Bracket for M324 & M424
Garmin NMEA 0183 Power/Data Cable
Furuno 10 Pin Transducer Extension Cable
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Female Adapter Cable
Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 9 Meter.
Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm
The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.
The Shakespeare gold plated brass PL-258-CP-G joins two cables together in a snap. No stripping or soldering required. For RG-8X or RG-58/AU coax cable. Barrel connector for PL-259-ended cables.
Paired with a GHP20, GHP12 or Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.
Order Now and Get Free UPS Ground Shipping!
For mounting the Lowrance HDI Skimmer Transducer - 83/200 & 455/800 kHz.
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
If you are mounting a Lowrance HDS or Elite-7 under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
Simrad 13' Female Micro-C NMEA 2000 Connector to Simnet Connector.
Simrad NSE/NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.
Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.
Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.
The Garmin GRID Garmin Remote Input Device offers maximum control of your GPSMAP 7x2, 7x2xs,9x2,9x2xs, 10x2, 10x2xs, 12x2,12x2xs, 7600, 7600xsv and 8000 Glass Helm series without ever touching the crystal clear glass display. Rotary knob and joystick enable you to easily navigate thru menus and screens on any number of networked displays.
Lowrance Flush Mount kit for Lowrance Elite and Hook 7 Series GPS and Fishfinders.
Looking for a replacement surface mount for your GPSMAP 720/740 series GPS Plotter/Sounder units. Garmin's 010-11483-00 is the exact mount that came with your unit originally. Includes Bail Mount and Knobs.
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
Icom HM167 Waterproof Speaker Microphone for M72, M73 & M92
Standard Horizon CAT460 Rubber VHF Marine Antenna for HX280S, HX290, HX370, HX370SAS, HX380S, HX40, HX400, HX400IS, HX851, HX870 and HX890.
Garmin's 010-11612-00 adapter allows you to connect newer 8-pin transducers to Garmin GPS Units that require a 6-pin connector.
The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.
The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.
Looking for a second Bail Mount for your 7" or 9" Garmin echoMap DV or SV model? Garmin's 010-12233-03 Bail Mount with Knobs is the exact Mount that came with your echoMap 7XDV, 7XSV and 9XSV Model. Includes quick cable disconnect feature allowing you to plug all necessary cords into the bracket for easy removal and re-install of your unit.
Simnet to Micro-C (male) cable used to connect Simnet to NMEA 2000 backbone, .5 meter in length.
Furuno Power cable for GP1670F & GP1870F. This is the exact power cable that originally came with your GP1670 or GP1870F unit.