Garmin Marine Accessories

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, and GPSMAP 1242xsv Chartplotter Fishfinders.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin Marine Network Cable (6').

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.

The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.

Garmin Marine Network Cable (20').

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.

Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.

Garmin Bracket Mount with Quick Release for 7" CHIRP CV and DV units.

Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.

Protect your Garmin GPSMAP 8x12 series GPS display from scratches and sun when not in use!

Protect your Garmin GPSMAP 7x3 series GPS display from scratches and sun when not in use!

Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 9-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

Stabilize your Force Trolling Motor when in a stored position with this Deck Mount Stabilizer Kit.

Protective cover for Garmin Echomap Ultra 2 12" Displays. Compatible with Echomap Ultra 2 Displays Only!

Garmin's USB Card reader with USB-C adapter cable pairs with your compatible chartplotter and accepts up to 2 Full Sized SD Cards. Simplifies access to charts, software updates and ActiveCaptain® data. Compatible with GPSMAP 16x3, 8400, 8600, 9000 and 9200 Series Chartplotter/Fishfinders.

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Garmin 10 foot transducer extension cable for Garmin 12-Pin Transducers.

Garmin adapter cable connects a 12-pin transducer to a 4-pin sounder

Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.

The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.

Garmin Heavy Duty Transom Mount with Spray Shield

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 12" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.

Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units

The Garmin 2-Pin Threaded Power Cable is compatible with ECHOMAP UHD2 6-Inch, 7-Inch SV and 9-Inch Displays and measures 6 feet long.

Garmin's Water Resistant, Floating Handheld Remote Control with sunlight readable display provides complete control of the the Force Trolling Motors. Point and Go Gesture Steering along with User Programmable Keys for control of your chartplotter.

Garmin's Transom Mount bracket allows you to attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat providing excellent sonar returns at all speeds.

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Display Cover for Garmin STRIKER 4, STRIKER 4 Portable Bundle, STRIKER 4cv and STRIKER 4dv.

Flush Mount your Garmin STRIKER 7 and STRIKER Plus 7 with this kit. Includes Mounting Template, Hardware and Instructions.

Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.

Garmin Spray Shield for DownVu/SideVu Transducers

Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv,  922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243 and 1243xsv. 

The Garmin Marine Network Cable Connector gives you the ability to wire on the connector after you have run the cable through your boat.  Sold in a pack of two.

Garmin NMEA 2000 Multiport T-Connector.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and UHD 72cv, 73cv, 74cv and 75cv.
7" echoMAP Plus and echoMAP UHD ClearVu (cv) Models only!

The GRID 20 from Garmin allows remote access to your entire Garmin marine system. Includes a 360° joystick with rotary knob and push to select button control. Available in Vertical or Horizontal orientation.

Garmin Cigarette Lighter Adapter for echoMAP/Striker units with a 4 Pin Power Cable.