Free 2-Day Shipping on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
Garmin Heavy Duty Transom Mount with Spray Shield
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Active Phone charger is a must have*. Not only will you be able to secure your phone easily with one hand but you will also not have wires hanging around to catch on things. This 10W charger is up to 60% faster than previous models, even in high temperatures!
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: White.
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.
Seaview Modular Plate for Dome Radars provides you with a plate to mount your radar onto. The Seaview plate is designed to be mounted to a Seaview Base Mount.
Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.
Shakespeare 4365 4" SS GPS antenna mount
Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios
Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.
Garmin Tilt/Swivel Mount for STRIKER 4 Series Fishfinders.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.
The Seaview Mast Mount provides a very sturdy platform for your compatible radar.
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.
Shakespeare 4700 6-Inch SS Extension
Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.
Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.
The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.
Looking for a second Bail Mount for your 7" or 9" Garmin echoMap DV or SV model? Garmin's 010-12233-03 Bail Mount with Knobs is the exact Mount that came with your echoMap 7XDV, 7XSV and 9XSV Model. Includes quick cable disconnect feature allowing you to plug all necessary cords into the bracket for easy removal and re-install of your unit.
Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.
Flush Mount your Garmin STRIKER 7 and STRIKER Plus 7 with this kit. Includes Mounting Template, Hardware and Instructions.
Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.
The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Seaview Aft Raked Radar Mounting Base is both stylish and sturdy. Add a Seaview Radar Plate for a complete mount solution.
Radar Plate Required and Sold Separately
The Seaview Modular Plate for Dome Radars in Black provides you with sturdy base on which to mount your radar. The Seaview plate is designed to be mounted to a Seaview Base Mount.
Seaview 316L Stainless Steel Starlink adapter to mount to a 1"-14 threaded post & Stainless Steel Fixed Base.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Starlink Not Included, Sold Separately
