NMEA 2000 Satellite Compass with multi-band GNSS and Multi-Constellation for enhanced accuracy!
The Garmin Marine Satellite Compass (MSC) 10 features Multi-Band and Multi Constellation (GPS, Galileo, GLONASS and BeiDou) receivers to provide precise positioning when it matters most. Now you’re able to get reliable, accurate boat heave, pitch and roll information even in roughest of water conditions.
You’re able to use Garmin’s MSC 10 as a primary sensor for autopilots and other onboard systems that require accurate heading information. By using multiple receiver sources, the MSC10 can provide an accurate heading down to 2 degrees. Unlike other compasses, you can forget about having magnetic interference because the MSC10 uses Satellite Signals.
When pairing Garmin’s MSC 10 with a compatible radar, you're insured to get the most accurate target trails instead of jagged and zig zag ones that you may have seen in the past. The Garmin Reactor Autopilot series can benefit from the MSC 10 making sure your headings are accurate and consistent thus getting you to your destination quicker and saving fuel along the way.
The MSC10 is NMEA 2000 compliant which makes it plug and play with any existing NMEA2000 networks that may already be installed on your vessel.
Garmin MSC 10 Box Contents
Each Garmin MSC 10 Comes with:
- Garmin MSC 10 marine satellite compass
- Pole Mount
- Mounting Hardware
- 6M NMEA 2000 Drop/Backbone cable
- NMEA 2000 T Connector
- Documentation
- One Year Warranty
Garmin MSC 10 Key Features
- Built in Attitude and Heading Reference
- 10Hz Position update
- Simple installation via NMEA2000
- Multi-GNSS and Multi-Constellation for enhanced accuracy
- Provides accurate heave information thru NMEA2000 network
- Size: 6.1"W x 13.1"H x 3.0“D
Garmin MSC 10 Installation Instructions- Click Here
Product Accessories for Garmin MSC 10 Satellite Compass
Our Price:$89.95
SKU: GAX11442
Garmin NMEA 2000 Starter Kit
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
Our Price:$24.95
SKU: GAX11078
Garmin NMEA 2000 Micro T-Connector
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Our Price:$29.95
SKU: GAX11076
Garmin NMEA 2000 Backbone/Drop Cable 2 Meter
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Our Price:$32.95
SKU: GAX110761
Garmin NMEA 2000 Backbone Cable 6 Meter
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).
Our Price:$14.95
SKU: GAX11080
Garmin NMEA 2000 Male Terminator
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$49.95
SKU: GAX1107801
Garmin NMEA 2000 Multiport T-Connector
Garmin NMEA 2000 Multiport T-Connector.
Our Price:$14.95
SKU: GAX11081
Garmin NMEA 2000 Female Terminator
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$37.95
SKU: GAX110762
Garmin NMEA 2000 Backbone Cable 10 Meter
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$234.95
SKU: ATSBN2
Actisense SBN-2 Small Boat NMEA 2000 Network
The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
Our Price:$24.95
SKU: GAX11079
Garmin NMEA 2000 Power Cable
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
Our Price:$124.95
SKU: ATSBN1
Actisense SBN-1 Small Boat NMEA 2000 Network
The Actisense 4-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-1 is a complete 4-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
