Marine Accessories

Protect your Simrad RS20 VHF Radio from the elements with the 000-14055-001 Suncover.

Simrad's OP12 wired remote provides simple integration with Simrad autopilot systems to provide mode control, course adjustments, and power steering. The OP 12 remote can be combined with the IS42 Color Instrument Display as a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.

Flush Mount kit for Garmin echoMAP Plus and UHD 62cv, 63cv, 64cv and 65cv.

Garmin Flush Mount Kit for STRIKER Plus and STRIKER Vivid 4 and 4cv Units.

Garmin's GT10 Thru Hull Temp sensor provides accurate temperature readings from -13°-140°F in your baitwell, livewell or the waters your fishing. Simple Plug and Play integration with your NMEA2000 network.

Secure your Striker Plus 9sv with this compatible tilt mount.

Protect your Lowrance HOOK2 4x Display from the elements with this Sun Cover. Compatible with HOOK2 4x units.

Protect your Lowrance HOOK2 12" Display from the elements with this Sun Cover. Compatible with 12" HOOK2 TripleShot units.

Lowrance 10' Transducer Extension for Hook2 Bullet Skimmer. Compatible with Lowrance Hook2 4x Fishfinder.

Lowrance 10' Transducer Extension for Hook2 SplitShot and TripleShot Transducers. Compatible with Lowrance Hook2/Hook Reveal 5", 7" and 9" Splitshot and TripleShot GPS / Fishfinders as well as 5", 7" and 9" Simrad Cruise Units.

The Lumishore EOS i-Connect Hub makes installation of your Lumishore EOS SMX153 RGBW lights a breeze. Advanced junction box connects up to 4 SMX153 lights for simple plug and play connections.

Lumishore's SUPRA i-Connect hub Switch works with the SUPRA SMX i-Connect Hub to control your SMX53 Lights. This low-profile dash mounted all in one on/off/momentary switch allows you to switch between light colors, Fade colors, strobe colors in 2 speed and adjust brightness. (Requires i-Connect Hub Junction Box to work)

The Standard Horizon SCU30 is a wireless access point that provides the ability to add up to 4 RAM4/RAM4X Wireless Microphones.

The SMX154 RGBW Full Color Change lights from Lumishore are a great add on for most boats. Water Ingress Rating of IP68, 7,000 Fixture lumens and a 90° beam angle. *Additional Parts Required Depending on Desired Use.

Raymarine 8M Transducer Extension Cable for Raymarine RealVision Transducers.

The Airmar 6-Conductor Splice makes splicing 6-strand wire together fast, easy, clean and secure.

The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.

The GRID 20 from Garmin allows remote access to your entire Garmin marine system. Includes a 360° joystick with rotary knob and push to select button control. Available in Vertical or Horizontal orientation.

The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.

Standard Horizon 240SW 5" x 7" PA Horn. 4 Ohm and 30W output.

Raymarine's A80542 Passive Speaker pairs with your wired handset to provide crystal clear audio from your compatible VHF. Rugged and Waterproof.

Pair the HV-300 Thru-Hull transducer pair with your Raymarine element for excellent underwater images and accurate water temperatures. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat! *Designed for Boats with over a 6° Deadrise

Make upgrading from a legacy E90W to an Axiom Pro 9 a breeze. With this installation adapter plate you can fit your Axiom Pro 9 in the existing spot of your E90W.

The ACR RCL-85 LED Searchlight with 240,000 candela using 6 High Flux (30W) LED’s provide over 1/2 nm of lighting. Simple Install – connect to 12 to 24 volt power and you’re ready to go! Includes wireless handheld remote to rotate light 350°.

The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.

Garmin Cigarette Lighter Adapter for echoMAP/Striker units with a 4 Pin Power Cable.

Navico SS75 600W medium frequency CHIRP transducer, 9-Pin XSONIC, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

Garmin's ECHOMAP Plus 6xcv Boat kit comes with everything you need for a second station setup. Includes GT22HW-TM Transducer, Tilt/swivel mount with quick-release cradle, Power/data cable and an 8-pin transducer to 4-pin sounder adapter cable.

Standard Horizon SEP-10A Earphone for SSM-21A Submersible Speaker. *Requires SSM-21A Mic for connection.

The Standard Horizon FBA-40 Alkaline Battery Tray allows you to use Alkaline batteries in your HX380 VHF Radio.

Standard Horizon SHC-20 Nylon Case for HX380, HX400 and HX400is Handheld VHF Radios

Furuno replacement power cable for Furuno GP1871F and GP1971F GPS/Chartplotters.

The Garmin gWind Transducer provides True Wind Speed and True Wind Angle information to your NMEA 2000 compatible Garmin chartplotter. The gWind has a three-bladed propeller for accurate True Wind Speeds and its twin- fin design gives a more stable True Wind Angle.

Power and connect your GPSMAP 8600 series chartplotter with this 6-foot, 2-pin power/data cable.

Pair your Panoptix Livescope LVS32 transducer with the Perspective Mode Mount and see below the surface like never before! Now you can see what's out front and what's around your boat with an overhead view point.

Take full control of your Lumishore lighting directly from your MFD or internet-compatible display device. Simply connect Command Center to the MFD and/or Display with a single plug-&-play cable to create a centralized control platform for the entire vessel,

Take full control of your Lumishore lighting directly from your EOS-LUX SUPRA display. The dedicated glass touch screen and rotary dial give you full control of you vessels compatible underwater lights.

The Icom OPC1465 is a shielded control cable used to connect the AT140 tuner to the Icom M803 Single Side Band Radio.

The Standard Horizon HC2400 Dust Cover is compatible with the Standard Horizon GX2000/ GX2200 and GX2400 Matrix Series Radios and is a direct replacement to the HC2000 dust cover.

The Standard Horizon SSM-72H RAM4X is a wireless microphone for your Standard Horizon GX2400 VHF Radio. SCU-30 wireless access point required.

The Furuno MCU005 Keyboard for TZTL12F, TZTL15F and TZT2BB only. Please note, Not for NavNet TZtouch or NavNet 3D.

Garmin's Panoptix Livescope system with Ice Fishing Kit pairs with a compatible Garmin ECHOMAP or GPSMAP display and includes a GLS 10 Sonar Black Box, Panoptix LVS32 Transducer with 20' Cable, Pole Mount, Power Cable and Portable Fishing Kit which contains a bag with handle, rechargeable battery and battery charger.

Navico's Precision-9 Compass provides heading and rate-of-turn information to Simrad, B&G and Lowrance autopilot, radar and navigation systems. NMEA2000 Connectivity.

Pair the JCU-2 with compatible FLIR cameras for full control! Wake the system or put it in standby, control the pan and tilt movement, zoom the camera, control cameras modes and more!

Boost your sonar power with the Furuno DI-FFAMP! Pair with the TZT3 series of GPS/Fishfinders to increase your power to a 2/3 kW Fish-finder! High powered CHIRP provide strong & clear echoes at every depth range, displaying fish targets and bottom structure with exceptional clarity.

The ACR RCL-100 LED Searchlight is designed with 220,000 candela of light providing high intensity lighting in dark and low light conditions. Rugged Design with Die Cast Aluminum Casing and Wired Remote Control operation enabling users a 360° rotation at fast or slow speeds. Includes Master Controller, Wi-Fi Remote Control for Mobile Devices, and Wired Point Pad Controller.

Garmin Trolling Motor Mount for GT36UHD and GT56UHD Transducers. Can be used as a secondary mount or replacement as this is the same trolling motor mount that came with the GT36 and GT56 originally.

Protect your Raymarine Element 9 from scratches and sun when not in use!