Marine Accessories

Garmin's ECHOMAP Plus and UHD 7xcv Boat kit comes with everything you need for a second station setup. Includes GT22HW-TM Transducer, Tilt/swivel mount with quick-release cradle and Power/data cable.

Lowrance 7 Pin Transducer to Hook2 and Reveal Fishfinder Adapter Cable.

Get the latest software update available from Garmin echoMAP Series with this pre-programmed SD card.

The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!

The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.

PropSpeed's FoulFree Transducer Coating Kit is the biggest advancement in transducer paint and coatings in the last 30 years. It will keep your thru-hull or transom mount transducer free of marine growth. This nontoxic formula has zero leaching of harmful chemicals into water unlike traditional anti-fouling bottom paints and is certified by Airmar.

Connect a Garmin GT30 transom mount scanning transducer and a Garmin GT8HW-IH, GT15M-IH, Airmar P79 in-hull mount traditional transducer to a compatible ECHOMAP Plus, echoMAP CHIRP chartplotter/sonar combo or a GPSMAP 10X2xsv/12X2xsv chartplotter.

Icom Alkaline Battery pack for M37

Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.

Garmin’s GPS24XD HVS GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes NMEA0183 Bare wire connection, under-deck, pole and surface mount options.

Protect your Garmin GPSMAP 9x3 series GPS display from scratches and sun when not in use!

Protect your Garmin GPSMAP 8x12 series GPS display from scratches and sun when not in use!

Protect your Lowrance HDS 12 LIVE when not in use! 

Garmin Protective Cover for echoMap Plus and UHD 72cv/sv, 73cv/sv, 74cv/sv and 75cv/sv units.

Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.

The Icom MBZ-1 is the perfect accessory for your Icom M510 VHF Radio. Specifically designed for the M510 radio, the MBZ-1 fits securely on to your radio and offers protection from the elements when not in use.

Icom 7.2V Li-Ion BP-306 Battery. Compatible with Icom M94D Handheld VHF.
Can Not Ship via Air Service, Must Ship Ground Only!

Furuno Pole Mount for SCX20 and SCX21 Satellite Compass.

Pair your Garmin Livescope Plus or LVS 34 Transducer with the Barrel Mount to Mount on the barrel of your trolling motor. Adjustable with molded teeth, this fits all barrel diameters including popular Minn Kota and MotorGuide Trolling Motors.
For Livescope Plus/LVS34 Transducer Only!

Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units

Large, 5-Inch, high resolution touch display for your compatible Garmin autopilot. The GHC 50 has a sleek, edge-to-edge glass display that matches current, high-end Garmin GPSMAP chartplotters. Wired and wireless remote-controlled options, plus Ethernet and WiFi Connectivity make the GHC 50 an advanced autopilot instrument display!
Requires a compatible Garmin autopilot, sold separately.

Protect your Simrad Cruise 9 from the elements! Simrad protective cover for Simrad Cruise 9-inch displays.

Scanstrut’s smallest wireless phone charging mount! The Scanstrut Nano is a 10W waterproof wireless charger that holds your phone securely while charging it. This ultra-compact design can be installed and used in any orientation.

Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.

The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

The SiTex AIS Zero Loss Antenna Splitter Module allows for full use of VHF communications and AIS send/receive with a single VHF antenna. The MDA-3 is designed for use with Class B AIS Transceivers.

Network compatible Garmin devices with the 20 foot BlueNet Marine Network Cable.

The YK-998 LED flashlight can provide up to 120 hours of light while outputting 120 max luminous flux. The rotary 'switch free' operation is easy to use and the rugged, waterproof design ensures your YK torch can even withstand deep sea exploration. The YJ-998 is dive tested to 15m.

The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).

Garmin's USB Card reader with USB-C adapter cable pairs with your compatible chartplotter and accepts up to 2 Full Sized SD Cards. Simplifies access to charts, software updates and ActiveCaptain® data. Compatible with GPSMAP 16x3, 8400, 8600, 9000 and 9200 Series Chartplotter/Fishfinders.

Icom MB75 Flush Mounting Bracket for M502/M504/M506/MA510TR/M602/M604/M605/M803.

Shakespeare 4365 4" SS GPS antenna mount

Lowrance B60 20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Works on boats with deadrise between 16 and 24 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)

Airmar Kick Up Bracket for P66 transom mount transducer(replacement). Works with any Airmar P66 transducer.

Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios

This Furuno cable is dual purpose it is the Power Cable for an FCV 620/585 and also the NMEA 0183 for GP33. Cable will not provide power to a GP-33.

Garmin Power/Data Cable for 7-Pin Chartplotters. Replacement part.

Stainless Steel Mic Clip. 1 3/8 Wide x 1 13/16 Tall.

Garmin 10' Transducer Extension Cable for 4-Pin Transducers.

Lowrance Power Cord for Elite 5M (non-HD)

Furuno Power Cable Assembly for 1623,1715

Airmar Mounting Tank for M260. 

Furuno Snap On Front Display Cover.

Display cover for HDS5 Chartplotter & Chartplotter/Fishfinder units.

Network two Raynet devices together with the Female/Female Cable. Length 2M

Lowrance HDS / Elite and Hook HDI Series Power/Data Cable.
for all HDS / Elite-TI / Elite HDI / Hook HDI series units