Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
Mounts & Brackets
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
Shipping!
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
Shipping!
The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Shipping!
Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.
Garmin Heavy Duty Transom Mount with Spray Shield
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios
Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
Expected 6/17/2024
Shipping!
The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.
Shipping!
Shakespeare 4365 4" SS GPS antenna mount
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
Shipping!
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.
in 3-5 Days
Seaview Modular Plate for Dome Radars provides you with a plate to mount your radar onto. The Seaview plate is designed to be mounted to a Seaview Base Mount.
Shipping!
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus using this Garmin adapter plate.
The Seaview Aft Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
Shipping!
Shakespeare 4700 6-Inch SS Extension
Shakespeare 4700-1 12 inch SS Extension
Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
Furuno Display Mounting Knob - 2 pieces required
in 3-5 Days
Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.
in 3-5 Days
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
Looking for a second Bail Mount for your 7" or 9" Garmin echoMap DV or SV model? Garmin's 010-12233-03 Bail Mount with Knobs is the exact Mount that came with your echoMap 7XDV, 7XSV and 9XSV Model. Includes quick cable disconnect feature allowing you to plug all necessary cords into the bracket for easy removal and re-install of your unit.
Garmin's In-Hull Transducer Mounting Kit is the perfect solution for Kayak Fisherman. Compatible with Garmins's HD-ID (77/200kHz) or GT20-TM(77/200kHz) Transducers (Sold Separately) this in-hull mount allows includes adhesive that attaches and conforms to the inside of the kayaks hull.
in 3-5 Days
Flush Mount your Garmin STRIKER 4 with this kit. Includes Mounting Template, Hardware and Instructions.
in 3-5 Days
The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
Shipping!
Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with many 24-inch radar domes.
in 3-5 Days
Shipping!
The Shakespeare 3187 Stainless Steel Ratchet Mount is a versatile mount with a four-way ratchet design. Designed for both vertical or horizontal mounting in mind! The 3187 mount fits standard 1"- 14 threads and features a cable slot for easy installation.
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter using this Garmin adapter plate.
The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Starlink Not Included, Sold Separately
Shipping!
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
Shipping!
Flush mount your 9-inch Lowrance Eagle display with the dash mounting kit!
in 3-5 Days
Flush Mount Kit for Garmin 400 Series.
in 3-5 Days
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Shipping!
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
in 3-5 Days
Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
in 3-5 Days
Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.
in 3-5 Days