Marine Electronics

Mount your compatible 1kW transom mount transducer with the transom mount bracket kit. This high performance bracket is compatible with the Airmar TM258, TM260, TM265, TM270W and TM275C housings.

Furuno Bronze Thru-Hull dual frequency 50/200kHz triducer(speed, depth, and temp). Fairing Block Included.

Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.

Icom 12 volt Cigarette Lighter compatible with Handheld charging bases BC119N, 160, 191, 193, 213.

Furuno NMEA Cable, 1 x 6 Pin Connector, 5 Meters.

Furuno 526TID-HDD 1kW Bronze Thru-Hull Transducer with High Speed Fairing Block is a must have for any serious recreational or commercial fisherman. Broadband Technology provides excellent fishfinding and detection. 10-Pin connector for Furuno.
(Depth/Temp).

Shakespeare 4700 6-Inch SS Extension

Shakespeare 5241-R 36 inch SS VHF Antenna.

Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.

Includes: Waterproof GPS Receiver with bulkhead mount, 15 foot USB cable.

Furuno 525TLTD20, B60-20 Low Profile Bronze Thru-Hull Transducer with 20 degree tilted element and temp. Designed to works on boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Garmin 010-10982-00, B60-20 Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element and temp. Designed for boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Furuno GP330B NMEA2000 GPS Receiver is designed for pinpoint accuracy with your Furuno NavNet 3D or TZtouch Display. NMEA 2000 Network Required when installing without DRS Radar.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.

The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.

A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

This Furuno Cable will allow you to connect two network units together or connect to a network hub. 2M total length with RJ45 connectors on both ends.

The Poly-Planar MB21 Waterproof VHF Speaker is perfect for any open or express boat where noise is a concern. This 2" speaker provides clear sound from your fixed mount vhf.

The Sitex CVS 126 is a powerful 600 watt fishfinder featuring a dual frequency 50/200 kHz operation. With digital signal processing and Sona-Tone the Sitex 126 will help you catch fish.

Lowrance B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element. Works on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. Compatible with Lowrance Blue Connector and Simrad NSE/NSS/BSM-1.
(Depth/Temp)

The Sitex Transom Mount Dual Frequency, 600W Transducer provides accurate depth, speed and temperature readings to your Sitex CVS-126, CVS-1410, SVS-650 fishfinder, SVS560CF or SVS-760CF.
(Depth/Speed/Temp)

The Furuno Plastic Thru Hull Dual Frequency Transducer provides accurate depth readings for Furuno fishfinders and sounder modules. 50/200khz. Requires In Hull Mount or fabrication of a fairing block.
(Depth Only).

The Furuno 235DST-MSE is a Thru-Hull Smart Sensor that operates at 235khz so that it will not interfere with your 200khz fishfinder. This transducer will provide numerical depth, speed and temperature readings to your compatible Furuno display.

Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)

Airmar Kick Up Bracket for P66 transom mount transducer(replacement). Works with any Airmar P66 transducer.

The Shakespeare 4353 AM/FM On Glass Antenna is designed to eliminate the need for a whip or fiberglass style AM/FM antenna. Easy to install and affordable!

The Speco 5" x 8" Weatherproof PA Speaker is a high quality hailer horn with 8 Ohm impedance. Constructed from white ABS plastic with stainless steel mounting hardware, the Speco is top quality at an affordable price.

The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.

Viking RescYou Coastal 6 Person Liferaft packed in a fiberglass container or Valise. Viking RescYou Coastal rafts are ideal for situations where rescue is expected within 24 hours. Price shown is for raft packaged in a Valise.

Viking RescYou 4 Person Liferaft packed in either a fiberglass container or Valise. The RescYou series of liferafts are ideal for ocean cruising and short voyages. Price shown is for raft packaged in a Valise.

This Furuno cable is dual purpose it is the Power Cable for an FCV 620/585 and also the NMEA 0183 for GP33. Cable will not provide power to a GP-33.

The Raymarine E66088, B60 12 Bronze Low Profile Thru-Hull Transducer for Raymarine and is designed to work on boats with deadrise between 8 and 16 degrees. Does not need Fairing Block. (Depth/Temp)

The Garmin GSD 24 provides high powered fishfinding and depth tracking capabilities to your Garmin marine network. With up to 2kw of power, the GSD24 is a plug and play add on to your Compatible Garmin chartplotter.

The Garmin 8 Pin B117 600W Bronze Low Profile Thru-Hull Transducer works on boats with up to 7 degree deadrise for GSD 24. Includes temp and does not need Fairing Block. Garmin part# 010-10182-21.
(Depth/Temp)

The Garmin 8 pin B260 1kW Bronze ThruHull Transducer with high speed fairing block provides the best fishfinding performance thanks to broadband technology. 50/200Khz Dual Frequency.
(Depth/Temp)

The Garmin B744 V 8 Pin Bronze Thruhull Transducer for GSD 24, Garmin Chartplotter/Sounder or Garmin Fishfinder with fairing block operates at 50/200KHZ and provides accurate Depth, Speed and Temperature readings.
(Depth/Speed/Temp)

Garmin 010-10327-20, P79 8 Pin Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The transducer mounts inside the boat and will work on boats with deadrise up to 22 degrees.

Furuno 520IHD, P79 Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The 520IHD mounts inside the boat and will work on boats with deadrise up to 22 degrees.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) No Connector, For Bare Wire Install.

The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

Si-Tex MDA-1 Metadata-Class B AIS Transceiver with internal GPS 50 channel Smart Receiver will provide maximum range and exceptionally efficient real time AIS message processing for all AIS messages.
Price Includes Programming.

The Furuno AIR-033-204 Adapter Cable adapts 8-Pin Furuno Transducers to Furuno Fishfinders with 10-Pin Transducer Connector. Length: 1 Meter.