The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Category
- ACR Accessories (4)
- Covers (48)
- Furuno Accessories (58)
- Fusion Accessories (8)
- Garmin Marine Accessories (226)
- Icom VHF Radio Accessories (24)
- Interface Cables and Connectors (67)
- Lowrance Accessories (69)
- Marine Lights (26)
- Mounts & Brackets (106)
- Nocqua (0)
- Poly Planar Accessories (1)
- Power Cords (39)
- Radar Cables (12)
- Raymarine Accessories (84)
- Simrad Accessories (33)
- Si-Tex Accessories (7)
- Standard Horizon Accessories (47)
- Transducer Cables (30)
- Installation Products (80)
- Siren Marine Accessories (0)
Marine Accessories
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
The Furuno AIR-033-204 Adapter Cable adapts 8-Pin Furuno Transducers to Furuno Fishfinders with 10-Pin Transducer Connector. Length: 1 Meter.
Shipping!
Stainless Steel Mic Clip. 1 3/8 Wide x 1 13/16 Tall.
Garmin NMEA 0183 Power/Data Cable
in 3-5 Days
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
in 3-5 Days
Furuno Power Cable Assembly for 1623,1715
Airmar Mounting Tank for M260.
in 3-5 Days
Shipping!
Furuno Snap On Front Display Cover.
Display cover for HDS10 Chartplotter & Chartplotter/Fishfinder units.
**NOT COMPATIBLE WITH PRO SERIES**
Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm
in 3-5 Days
Shipping!
Network two Raynet devices together with the Female/Female Cable. Length 10M
Shipping!
Network two Raynet devices together with the Female/Female Cable. Length 5M
Shipping!
The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Shipping!
Lowrance HDS / Elite and Hook HDI Series Power/Data Cable.
for all HDS / Elite-TI / Elite HDI / Hook HDI series units
The Shakespeare gold plated brass PL-258-CP-G joins two cables together in a snap. No stripping or soldering required. For RG-8X or RG-58/AU coax cable. Barrel connector for PL-259-ended cables.
Paired with a GHP20, GHP12 or Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.
Order Now and Get Free UPS Ground Shipping!
Shipping!
If you are mounting a Lowrance HDS or Elite-7 under a hard top or in a pilot house, the Point-1 GPS antenna will help you get a better signal by moving the antenna to an outside location.
Shipping!
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
in 3-5 Days
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
Simrad NSE/NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.
Garmin 8-Pin Power/Data Cable for Select echoMAP and GPSMAP Series Chartplotter/Fishfinders.
Lost or Missing Protective Cover for your GPSMAP 5x7, 5x7xs or echoMap 50s Series? The Garmin 010-11971-00 is the exact protective cover that came with your unit originally.
in 3-5 Days
Lowrance Flush Mount kit for Lowrance Elite and Hook 7 Series GPS and Fishfinders.
in 3-5 Days
Looking for a replacement surface mount for your GPSMAP 720/740 series GPS Plotter/Sounder units. Garmin's 010-11483-00 is the exact mount that came with your unit originally. Includes Bail Mount and Knobs.
in 3-5 Days
Network two Raynet devices together with the Female/Female Cable. Length 400mm
in 3-5 Days
Shipping!
Icom HM165 IPX7 Waterproof Rated Speaker Mic for M34/M36 and M93/M94D. Rugged Design.
Shipping!
Icom HM167 Waterproof Speaker Microphone for M72, M73 & M92
Shipping!
The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.
in 3-5 Days
Raymarine A80007 Raynet Network Switch is the central connection point for SeaTalkhs data that uses Raynet connectors. Connect multiple (up to 5) Raynet devices together with the Raymarine A80007. *This is not compatible with SeaTalkHS devices with RJ45 connectors.
Shipping!
Simnet to Micro-C (male) cable used to connect Simnet to NMEA 2000 backbone, .5 meter in length.
Replacement FNB-V110 Lithium-Ion battery for Standard Horizon HX290 Handheld VHF.
in 3-5 Days
Furuno Power cable for GP1670F & GP1870F. This is the exact power cable that originally came with your GP1670 or GP1870F unit.
in 3-5 Days
Shipping!
Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.
Shipping!
Furuno's TZTL15F Bracket Mount and Knobs. Mount your TZTouch 2 15" display to a flat surface with this bracket with adjustable angle for optimum viewing.
in 3-5 Days
Shipping!
Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.
in 3-5 Days
Flush Mount your Garmin STRIKER 7 and STRIKER Plus 7 with this kit. Includes Mounting Template, Hardware and Instructions.
in 3-5 Days
Garmin Tilt/Swivel Mount for STRIKER 4 Series Fishfinders.
in 3-5 Days
The Standard Horizon SBT-13 Alkaline Battery Tray allows you to use AAA batteries in your HX870 and HX890 VHF Radio.
Garmin Protective Cover for 9" echoMAP units. Compatible with Garmin echoMAP 93sv, 94sv, echoMAP CHIRP 92sv, 93sv,94sv and 95sv. Does not work with PLUS or UHD models
Icom BC-217SA/SE USB Charger for M25 and M37. Charge your Icom M25 or M37 Handheld VHF in 3 hours from a 110v outlet using the BC 217SA.
Garmin Protective Cover for 7" echoMAP units. Compatible with Garmin echoMAP 73dv, 73sv, 74dv, 74sv, echoMAP CHIRP 72dv, CHIRP 72sv, CHIRP 73dv, CHIRP 73sv, CHIRP 74dv, CHIRP 74sv and CHIRP 75sv.
Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.
in 3-5 Days
Garmin adapter cable connects a 4-pin transducer to a 8-pin sounder.
Garmin adapter cable connects a 12-pin transducer to a 4-pin sounder
Use this wire block to adapt your bare wire transducer to a 12-Pin Garmin connector.
Shipping!
Lumishore's SMX11 Surface Mount Underwater LED Lights add bright underwater lighting to your vessel and are easy to install. Perfect for above or below the water line, the SMX-11 provides 60 degrees of light while only drawing 1 amp current from 12v.
in 3-5 Days
Shipping!