Bright Display for NMEA 2000 Data
Garmin has designed the GMI20 Marine Instrument Display with a new, simple, and easy to use interface. The GMI 20 provides the user with a large display and extra-large digits making it a cinch to read.
The GMI 20 features a large, brilliant 4” color display and includes extra-large digits that are easily readable from a distance or wide angle. The GMI 20 brings forth enhanced daylight readability due to its impressive high contrast color scheme and anti-glare finish. Nighttime visibility is also heightened by the backlight dimmer and a night mode setting that offers the user the choice of full-color, red-black, or green-black color schemes. The Garmin GMI 20 Marine Instrument Display connects to the NMEA 2000 network allowing you to view information on the display including GPS speed, water depth and temperature, engine data, fuel level, wind direction, wind speed, and many more marine and vessel parameters. The GMI 20 also provides the user with customizable default profiles for use with powerboats, sailboats, fishing, and engine/fuel profiles. The instrument is easily installed with a low profile flush mount or custom flat mount option.
In addition, the Garmin GMI 20 also comes with two trim snap cover color options which allow you to match the GMI 20 with the GPSMAP 8000 Glass Helm series. With all these great features the Garmin GMI 20 Marine Instrument Display is a must have for the avid boater providing the ultimate on-board convenience at your fingertips.
Size: 4.33”H x 4.53”W x 1.18”D
- Large, bright 4” color display with extra-large digits for superior readability from a distance or angle
- Enhanced daytime and nighttime readability with full color, red-black, or green-black color scheme options, a backlight dimmer, and anti-glare finish
- Glass bonded lens to prevent fogging
- All new user interface with menus and gauges matched to GPSMAP 8000 Glass Helm Series
- Easy installation with low profile flush mount or custom flat mount option
Product Accessories for Garmin GMI 20 Marine Instrument Display
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.