Free 2-Day Shipping on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.
The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!
PropSpeed's FoulFree Transducer Coating Kit is the biggest advancement in transducer paint and coatings in the last 30 years. It will keep your thru-hull or transom mount transducer free of marine growth. This nontoxic formula has zero leaching of harmful chemicals into water unlike traditional anti-fouling bottom paints and is certified by Airmar.
The Shakespeare gold plated brass PL-258-CP-G joins two cables together in a snap. No stripping or soldering required. For RG-8X or RG-58/AU coax cable. Barrel connector for PL-259-ended cables.
The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 3 feet long (1 meter).
The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: White.
The Garmin marine network adapter cable converts small (male) network cable to a large network connector in order to connect to your compatible Garmin chartplotter.
The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).
Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. The NGX-1-ISO is equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.
The Seaview Modular Aft Mount and Plate with Light Bar Bundle includes the standard Seaview 5" Aft Raked Modular Radar Mount Base, Seaview Modular Plate for Dome Radars, Seaview Light Bar and the Seaview LED Light for Lightbar.
Instant Savings with Bundle!
The Seaview Large Black Coated Stainless Steel Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview Multiple Cable Seal comes in Black Powder Coated Stainless Steel with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus using this Garmin adapter plate.
The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.
The Garmin Transducer Replacement Kit allows you to easily replace or upgrade the built-in transducer on your Garmin trolling motor.
Network compatible Garmin devices with the 20 foot BlueNet Marine Network Cable.
Add the Garmin Power Receptable to your compatible Garmin Force trolling motor to add a 70A power receptacle.
Use this Garmin Power Plug to add a 70A power plug to your Garmin Force trolling motor.
The 60A Garmin Circuit Breaker is used when installing a compatible Force Trolling Motor.
The Garmin BlueNet 30 Gateway allows legacy Garmin marine devices to network with Garmin BlueNet network units.
Extend your Garmin 6-pin transducer cable 10 feet with the Airmar Transducer Extension Cable.
Extend your Garmin 6-pin transducer cable 20 feet with the Airmar Transducer Extension Cable.
The Raymarine ECI-100 Universal Engine and Control Interface bridges engine instrumentation and drive-by-wire steering with Raymarine autopilot and navigation systems. This simple, single point of connection integrates Raymarine’s latest generation of MFD’s and provides autopilot steering interface to Evolution EV-2 Drive by Wire autopilots.
Flush mount your 9-inch Lowrance Eagle display with the dash mounting kit!
The Prop Shaft Anode is compatible with Lowrance Ghost & Recon (saltwater version) and Simrad Recon trolling motors and prevents corrosion. The Prop Shaft Anode is a ring-shaped fitting that is installed over the existing propeller nut, on the back of the propeller.
*Anode must be used on Ghost Trolling Motors when using the motor in brackish water. Using a Ghost Trolling Motor in saltwater voids the warranty regardless.
*Anode must be used on Recon Saltwater Trolling Motors.
The Lowrance Eagle Power Cable is compatible with 5"/7"/9" Eagle and Eagle Eye Displays.
Stainless Steel Clam Shell, Large 2.25" W x 2.25" L
Almo Wire's 14 Gauge 2 Conductor wire comes in a 100' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 14 Gauge 2 Conductor wire comes in a 250' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 16 Gauge 2 Conductor wire comes in a 100' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
Almo Wire's 16 Gauge 2 Conductor wire comes in a 250' spool. The exterior plastic housing is white in color and the internal wires are Red and Black. Perfect for wiring your GPS, Fishfinder, VHF Radio or other piece of Marine Electronics.
The Seaview Small Grey plastic cable seal is designed to work with currently installed cables and provides a waterproof seal without removing and rerunning the cables!
The Seaview Large Grey Plastic Cable seal with split seal design allows for waterproof cable routing without removing connectors!
Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with many 24-inch radar domes.
The Seaview Small Polished Stainless Steel Cable seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview Large Stainless Steal Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
The Seaview Multiple Cable Seal comes in grey plastic with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Shakespeare 3187 Stainless Steel Ratchet Mount is a versatile mount with a four-way ratchet design. Designed for both vertical or horizontal mounting in mind! The 3187 mount fits standard 1"- 14 threads and features a cable slot for easy installation.
