Seaview

The Seaview Combination Mast Head All Around LED Light is a white, C5 certified Round Seaview 3NM LED combination mast head all around light with 7' of wire (12v). USCG approved for boats up to 20 meters (65.6') in length.

The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Color: White

The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount

The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.

The Seaview Starlink mount is the perfect direct surface mount kit for your Starlink Mini Antenna. Built for the marine environment with durable materials, the Starlink mount is also appropriate for RV's, vans, UTV's and trucks!

The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.

Seaview Modular Plate for Dome Radars provides you with a plate to mount your radar onto. The Seaview plate is designed to be mounted to a Seaview Base Mount.

The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below. Both radar plate and base are in black color. 
*Aft Raked Mount

The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Does Not Include Starlink, Sold Separately

The Seaview Modular Aft Mount and Plate with Light Bar Bundle includes the standard Seaview 5" Aft Raked Modular Radar Mount Base, Seaview Modular Plate for Dome Radars, Seaview Light Bar and the Seaview Combination Mast Head All Around LED Light.

The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.

The Seaview Mast Mount provides a very sturdy platform for your compatible radar.

The Seaview Small Grey plastic cable seal is designed to work with currently installed cables and provides a waterproof seal without removing and rerunning the cables! 

The Seaview Large Grey Plastic Cable seal with split seal design allows for waterproof cable routing without removing connectors!

Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with many 24-inch radar domes.

Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with Furuno DRS4W Wireless Radar and SiTex T760 Radars.

The Seaview Small Polished Stainless Steel Cable seal with split seal design allows for waterproof cable routing without removing connectors!

The Seaview Large Stainless Steal Cable Seal with split seal design allows for waterproof cable routing without removing connectors!

The Seaview Multiple Cable Seal comes in grey plastic with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!

The Seaview Multiple Cable Seal comes in Black Powder Coated Stainless Steel with split seal design and allows for waterproof cable routing for up to 3 cables without removing connectors!

The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.

The Seaview Aft Raked Radar Mounting Base is both stylish and sturdy. Add a Seaview Radar Plate for a complete mount solution.
Radar Plate Required and Sold Separately

The Seaview Modular Plate for Dome Radars in Black provides you with sturdy base on which to mount your radar. The Seaview plate is designed to be mounted to a Seaview Base Mount.

Seaview stainless steel Starlink adapter to mount to a 1"-14 threaded post.

Seaview 316L Stainless Steel Starlink adapter to mount to a 1"-14 threaded post & Stainless Steel Fixed Base.

Seaview 316L Stainless Steel Starlink adapter to mount to a 1"-14 threaded post & Stainless Steel Ratchet Base.

Seaview 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate. Machined to fit the Starlink Antenna Post.

Seaview 316L Stainless Steel Starlink adapter with a 1"-14 threaded Fixed Base on a 1/4" powder coated aluminum plate.

The Seaview PM5SL8 Vertical Mount will raise your compatible thermal camera or searchlight 5.5"-5.75". The small, 8-inch diameter base takes up minimal space, making it an ideal solution for installations where space is limited.

The Seaview ADABLANK top plate is compatible with select searchlights and marine cameras. The ADABLANK is designed to be mounted on a compatible Seaview modular mount (sold separately).

The Seaview 5” Forward Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Does Not Include Starlink, Sold Separately

The Seaview 5” Forward Mount with Plate Bundle is designed for Starlink Antennas. This mount features a pre-dimpled hole pattern and water-tight gasket in the center of the plate that allows for easy routing of the Starlink cable.
Does Not Include Starlink, Sold Separately

The Seaview 5” Aft Mount with Plate Bundle is designed for Starlink Antennas. This mount features a pre-dimpled hole pattern and water-tight gasket in the center of the plate that allows for easy routing of the Starlink cable.
Does Not Include Starlink, Sold Separately

The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.

The Seaview Aft Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.

Seaview Modular Plate for Starlink M1 or M2. The Seaview plate is designed to be mounted to a Seaview Base Mount.

The Seaview Vertical Thermal Camera Mount is compatible with M132/232 series cameras. This Seaview Vertical Mount raises your camera 5.75" clearing anything in its way. The 8" diameter is small, taking up little space. Pre-drilled holes provide a sleek appearance.

The FLIR M232 Pan/Tilt Thermal Image Camera with Seaview Mount Bundle includes the standard FLIR M232 Pan/Tilt Thermal Image Camera package with the Seaview Vertical Thermal Camera Mount.
Instant Savings with Value Bundle!

The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Color: Black

The Seaview Vertical Mount includes an 8" diameter, King Starboard base plate specifically designed for use with the Sionyx Nightwave camera. The raised mount is durable and corrosion resistant.