Marine Accessories

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

The Standard Horizon FBA-38 Alkaline Battery Tray allows you to use AAA batteries in your HX851S, HX850S, HX760S, HX751S or HX750S handheld VHF radio.

Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios

Standard Horizon 23' cable for Standard Horizon RAM Mic. This cable is an extension if you need to make a longer run from your radio to the RAM mic.

The Raymarine Masthead System provides accurate wind speed and direction. Includes Masthead only. Compatible with ST60+.

Icom MB132 Flush Mounting Bracket for M324 & M424

Furuno Power Cable Assembly for 1623,1715

Raymarine SeaTalkNG T-piece connector.

Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.

Simrad NSE/NSS Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.

Standard Horizon CAT460 Rubber VHF Marine Antenna for HX280S, HX290, HX370, HX370SAS, HX380S, HX40, HX400, HX400IS, HX851, HX870 and HX890.

Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Male Adapter Cable 1M.

Garmin 8-Pin Power Cable for GPSMAP 8x0, 8x0xs, 10x0, 10x0xs, 12x2 Touch, 7400, 7400xvs, 7600, 7600xsv and 1643 Series Chartplotter and Chartplotter/Fishfinder Models

The Standard Horizon SBT-13 Alkaline Battery Tray allows you to use AAA batteries in your HX870 and HX890 VHF Radio.

Looking for a replacement or additional mount for your 4" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with Garmin echoMAP 43/44dv, echoMAP CHIRP 42/43/44/45dv and echoMAP Plus 42/43/44/45cv models.

Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.

Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.

Icom Standard Antenna for M25/M37/M85/M92D/M93D/M94D

Power your compatible Garmin Radar with this 48 foot long threaded cable.

Raymarine's A80490 adapter cable is required for all CPT-S tranducers to connect to an Axiom RV, Axiom Pro S, Axiom 2 Pro S and an Axiom Pro RVX. 9 pin connection from CPT-S transducer will plug into the 25 pin connection on the MFD.

Icom's SP37 is a 40W Hailer Horn / Speaker for fixed mount VHF Radios.

The Airmar 6-Conductor Splice makes splicing 6-strand wire together fast, easy, clean and secure.

Control your Garmin Reactor Autopilot right from a remote. This rugged and water resistant remote provides the ultimate onboard control and convenience. Control steering and even use the remote for heading hold and course corrections! (compatible with Compact Reactor, Reactor 40 Steer by Wire and Reactor 40 Hydraulic)

Fusion ARX70B ANT Wireless Remote, Available in Black or White

Pair the HV-100.02 Transom Mount transducer with your Raymarine element for excellent underwater images and water temperature. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat!  Replaces A80603.

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 10" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 12" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.

Protect your Garmin GPSMAP 8x16 series GPS display from scratches and sun when not in use!

The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.

Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.

Raymarine's Raystar 150 10Hz replaces the RS130 and offers a GPS/Glonass Receiver that provides faster performance and enhanced accuracy. RS150 is SeaTalkNG Compatible and NMEA2000 Certified with optional devicenet adapter. Designed for Simple Surface Mounting.

The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: White.

The Ocean Signal EPIRB3 Category 2 (manual release) EPIRB includes a manual release bracket and includes an integrated AIS alert, visible light and IR strobe and support for EPIRB monitoring via smartphone app. Return Link Service adds peace of mind that your message has sent successfully. Whether you’re fishing, working or sailing offshore- the EPIRB3 is an important addition to your safety equipment.

The Garmin TD 50 provides control at your fingertips even when space is limited! This 5-inch monitor displays engine and system data, allows for the adjustment of lighting, climate controls, entertainment, security sensors, autopilots and more! Easily integrate the TD 50 with your system via NMEA2000, OneHelm systems, EmpirBus and the Garmin Marine Network System.

The Single Arm Holding Wrench fits the B164 and B175/SS175 transducers and assists with installation. This wrench fits on the top of the transducer and holds it in place during installation. This wrench can be used in tandem with the Single Arm Wrench or Double Arm Wrench.

The Ocean Signal Flotation Pouch is designed for use with the Ocean Signal PLB1 and is required for the PLB to float.

The Sionyx Vinyl Cover is designed specifically for the Nightwave camera and features a tightening strap for a snug, secure fit. The cover provides long-lasting protection against water, dust and UV rays.
Color: White

Protect your Lowrance 7-inch Eagle display from the elements with the Lowrance protective cover!

The Lowrance Eagle TripleShot transducer is designed exclusively for the Lowrance Eagle series and provides CHIRP, DownScan and SideScan imaging. DownScan FishReveal technology provides unparalleled target separation and identification!

The MMR-25W controller delivers convenient control of your MediaMaster source unit including the MM105 or MM105-HR from up to 35 feet away. The sealed, water-resistant design features a large button layout ideal for use while on the move!

The MMR-20-BE is a round, wired remote controller, compatible with MediaMaster. This non-display remote controller adds auxiliary control to MediaMaster source units. The weatherproof (IP67) design is built for the elements and is ideal for both day and night use! The MMR-20-BE is compact in size and ideal for even the tightest spaces.

The Navico Ethernet Adapter Cable Green M12M 8-pin - Yellow 5-pin female (1.2 ft) works to adapt yellow ended ethernet cables to the NEP-3 port expander.

The Furuno Transom Mount Dual Frequency Transducer provides accurate depth, speed and temp readings for Furuno fishfinders and sounder modules. 600 Watts and 50/200khz frequencies.(Depth/Speed/Temp).

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Shakespeare 4700 6-Inch SS Extension

Furuno Display Cover for FCV 585, FCV 587, FCV 588 Fishfinders and Furuno 1815 Radar.

Furuno external GPS Antenna for GP1670F and 1870F. Also the replacement antenna for the 1650/1850 Series, 7000 Series, GP31, GP32 and GP33. 10 Meter Cable with TNC connector.

The Icom HM195 Command mic IV offers full control of your Icom M400BB, M424G, M506, M510, M605, M410BB and M510BB from a remote location like a bridge or salon. The HM 195 can also be used as an intercom.