Furuno Autopilot with Gesture Control!
The Furuno NavPilot 300 with Fantum Feedback is an autopilot system for planing and semi-displacement outboard vessels between 24ft and 50ft in length. Built for simplified installation, the NavPilot 300 no longer requires the use of a physical rudder feedback unit due to the use of a heading sensor (*Heading Sensor Required and Sold Separately). The Fantum Feedback system which achieves precise control of the vessel, from trolling speeds to high speed cruising, utilizes a newly developed gain process rather than using a traditional rudder angled system. A 4.1” color display that can be adjusted to day or night mode, is easy to install and offers a variety of user friendly menus and information in digital or analog modes.
Focus on fishing, not steering. That’s a good motto to live by when you add the Navpilot 300 system to your vessel. The built-in Sabiki Mode allows the autopilot to take control while you are drifiting astern and is only available on outboard engine vessels. While the Sabiki Mode is engaged, your direction can be kept by simply adjusting the throttle and is made to be used particularly when jigging, bottom fishing, or Sabiki fishing. Other easily accessible modes are Highway, Auto, Advanced, and Fish Hunter mode.
Built with Gesture Control, this Furuno NavPilot has a simplified push, point, and shoot functionality. A unique way to steer your boat, a Bluetooth signal is sent from the control device anywhere on the vessel, within 10 meters of the NavPilot system, allowing you to change directions quickly and simultaneously. Once you push, hold the button and move the controller in the direction you want to move in, simply release the button and the boat is redirected. Now you can literally point at what you want to drive towards.
- NavPilot 300
- FAP-3012 Processor Unit
- FAP-3011 Control Unit with Gray Cover
- GC-001 Gesture Controller
- SCX20 Satellite Compass
- SCX20 Satellite Compass
- Cable Assembly
- Gaskets, Screws and Adhesive
- Flush Mount Template and Installation Guidelines
- Operators Manual
- Bi-Directional Flow Switch Sensor
- Installation Instructions
- 2-Year Warranty
- Bluetooth Gesture Control Technology Built-in
- Self-Learning Adaptive Software
- Controllable from TZtouch, TZtouch2, GP1871F and GP1971F
- Multiple Navigation and Fish Hunter Modes
- Compatible with Second Autopilot Station
- Display Size: 4.5" W x 4.5" H
Product Accessories for Furuno NavPilot 300 with SCX20 and SafeHelm2 Bundle
Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 1.0 Cubic Inches per second (For Ram sizes from 7-12 Cubic Inches in volume)
Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 1.6 Cubic Inches per second (For Ram sizes from 12-23 Cubic Inches in volume)
Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.1 Cubic Inches Per Second For Ram Sizes of Up to 13 Cubic Inches in Volume
Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.7 Cubic Inches Per Second For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume
Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 0.6 Cubic Inches per second (For Ram sizes less than 8 Cubic Inches in volume)
Similar Products and Value Bundles
- ID#: 6058