Angular velocity sensor and magnetic bearing sensor incorporated
The Furuno PG700 is an Integrated Heading Sensor that outputs your boat's heading in NMEA 2000 format. The PG-700 uses an angular velocity sensor and magnetic bearing sensor to give you the most accurate heading reading. The PG 700 can also output magnetic bearing data to FURUNO CAN bus device. Includes L-shaped mounting base for mounting on bulkhead and a 6 Meter, double-ended NMEA2000 Micro Cable. NMEA 2000 T required.
Product Accessories for Furuno PG700 NMEA 2000 Heading Sensor
Our Price:$179.95
SKU: NM2KSTR
Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.
Our Price:$29.95
SKU: NM1701
Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
Our Price:$31.95
SKU: NM1702
Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
Our Price:$24.95
SKU: NM5301
Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
Our Price:$13.95
SKU: NM5501
Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$39.95
SKU: NM1704
Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Our Price:$31.95
SKU: NM1703
Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
Our Price:$13.95
SKU: NM5801
Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$48.95
SKU: NM1708
Maretron NMEA 2000 Backbone Cable 10 Meter
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Our Price:$20.95
SKU: NMFACFST
Maretron NMEA 2000 Field Attachable Female Connector
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$49.95
SKU: NM1801
Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.
Our Price:$20.95
SKU: NMFACMST
Maretron NMEA 2000 Field Attachable Male Connector
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Our Price:$24.95
SKU: NMITCMCF
Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
Our Price:$199.95
SKU: FUFI5002
Furuno FI5002 Junction Box
Furuno's FI5002 6-Port Junction Box supports both 12VDC and 24VDC Networks, has 2 NMEA2000 backbone ports and allows up to 6 NMEA2000 components to be networked together.
