Free 2-Day Air on Thousands of Items!
The Garmin USB Voice Control Bundle allows you to pair a compatible Garmin chartplotter to a compatible microphone or headset for voice control features.
The Furuno DRS AX and NXT Signal/Power Cable is compatible with Furuno DRS AX and DRS NXT Radars. The Furuno Signal/Power Cable is a required component for your Furuno radar.
Size: 15M
Furuno mounting bracket for TZT3 16" displays. Includes bracket mount and knobs.
The p70Rs Autopilot 3.5" control head from Raymarine offers both push button and rotary control dial for compatible autopilots and designed with power boats in mind making operation a breeze!
The Raymarine AR200 Augmented Reality Sensor features a Global Navigation Satellite Systems (GNSS) Receiver and Attitude Heading Reference System (AHRS) sensor and provides position, heading, pitch and roll information to compatible Raymarine displays. The AR200 also provides augmented reality features to your compatible Raymarine Axiom display.
Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models
The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.
The Airmar Mix and Match cable for Garmin Low CHIRP 12-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 12-pin sonar port.
Protect your compatible Garmin VHF radio from the elements! Compatible with Garmin VHF 210, 210 AIS, 215 and 215 AIS Radios.
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
The Raymarine RNS-5 network switch allows for easy expansion of Raymarine systems using RayNet high-speed Ethernet cabling. Need more than 5 ports? Two RNS-5 switches can be daisy-chained together for larger systems.
The Scanstrut Flip Pro is 12V or 24V input and is equipped with 1 Type A and 1 Type C port, providing options in the best connection and power for your device. The Flip Pro is small in size, IPX4 waterproof rated and includes a protective cap that springs closed and locks open when charging.
The Lumishore DL55 White and Blue is a dual-color (white and blue) downlight that provides excellent illumination in indoor or outdoor overhead spaces. Completely water sealed and simple to install- the DL55 is part of the Lumishore Eclipse series. Control with simple on/off switch or the Lumishore Eclipse Command Center (not included, sold separately).
Raymarine Short Arm Wind Vane for Wind Speed and Angle. Includes 30m cable. Compatible with i60, iTC-5, ST60+ and ST60.
The ROKK Charge Pro is an IPX6 waterproof USB charger featuring USB-A and USB-C charging ports. The ROKK Charge Pro remains waterproof even while in use! Constructed from marine-grade materials, and wash-down ready, the ROKK Charge Pro is a top choice for charging in a marine environment.
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: Black.
Standard Horizon SSM 72H RAM 4X Wireless Mic and SCU30 Value Bundle includes the Standard Horizon SSM72H Wireless RAM4X Microphone and SCU-30 Wireless Access Point, compatible with the Standard Horizon GX2400 VHF Radio.
Instant Savings with Value Bundle!
Furuno 12 Pin Pigtail Cable Assembly for NavNet TZtouch3, 1 meter.
The Garmin marine network adapter cable converts small (male) network cable to a large network connector in order to connect to your compatible Garmin chartplotter.
The Seaview 5” Aft Mount with Plate Bundle is designed for Starlink Antennas. This mount features a pre-dimpled hole pattern and water-tight gasket in the center of the plate that allows for easy routing of the Starlink cable.
Does Not Include Starlink, Sold Separately
Scanstrut's ROKK Wireless Catch 10W Charger safely holds your phone in place as it wireless charges it! The ROKK 10 Wireless Catch is up to 60% faster than previous models. Mount to any flat surface inside or outside your vessel!
The Simrad RF25N rudder feedback is a medium duty rudder feedback that translates the angular travel of the rudder to a connected NMEA 2000 device. The RF25N connects via NMEA 2000 and features an attached 5.5m cable.
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
The Garmin Marine Network Adapter cable connects a small marine connector network cable (female) to a large connector network cable (female). The small connector side of the cable features a right angle making it easier to route cabling.
Looking for a replacement propeller for your Force Trolling Motor? This is the exact propeller that was included with your Force - Garmin's High Efficiency propeller runs longer and quieter!
The Nose Cone with Transducer Mount allows you to replace the standard part of your Force Kraken trolling motor or to install a compatible Garmin transducer, compatible transducers listed below.
The Garmin GT12M-THF is a flush mount thru hull transducer with a 20-degree tilt, suitable for vessels with a deadrise of 16-24 degrees. The GT12M-THF is ideal for midsize fishing and cruising boats and features 350W mid-band CHIRP sonar.
The Single Arm Wrench fits the B164 and B175 transducers and assists with installation. The Single Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The SiTex AIS Zero Loss Antenna Splitter Module allows for full use of VHF communications and AIS send/receive with a single VHF antenna. The MDA-3 is designed for use with Class B AIS Transceivers.
The Garmin Field Installable Adapter Kit for the Garmin BlueNet Network allows for the easy routing of a Garmin BlueNet cable that does not have a factory installed connector.
The Seaview Aft Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.
Garmin Bail Mount with Quick Release for Echomap Ultra 2 10" Displays. Compatible with echomap Ultra 2 102sv & 106sv.
Garmin Bail Mount with Quick Release for Echomap Ultra 2 12" Displays. Compatible with echomap Ultra 2 122sv & 126sv.
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Color: Black
The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.
The BilgeBuddy is the only proactive monitoring solution on the market. Simply connect the BilgeBuddy device to monitor your boat’s existing bilge system. BilgeBuddy tests your bilge system every day so you can fix failed pumps and floats before your boat is sinking. Rest assured knowing your vessel is where it should be with GPS break-away and theft alerts. Receive high water, low battery voltage, impact damage, freezing alerts, and more. The BilgeBuddy is easy to install and does not require separate expensive sensors!
Requires Active, Paid Subscription
Use Coupon Code GPSBUDDY24 When Activating Your Subscription with BilgeBuddy and Receive $50 Off Your First Year's Annual Subscription.
Add some extra cable to your compatible Garmin VHF radio with this 12-pin, 10-meter fist mic extension cable. See compatibility list below.
Protect your Lowrance Eagle 4x Fishfinder from the elements with the Lowrance protective cover!
Mount your compatible 1kW transom mount transducer with the transom mount bracket kit. This high performance bracket is compatible with the Airmar TM258, TM260, TM265, TM270W and TM275C housings.
This Furuno Cable will allow you to connect two TZTouchXL units together or connect to a network hub. 10M total length with One Waterproof RJ45 connector and one Non-Waterproof RJ45 Connector.
Icom HM-236 IP67 Waterproof Speaker Mic for M85. Compact Design.
Extend the cable of your Raymarine HyperVision transducer with this 4m (13.12ft) extension cable. Specifically designed for the HV-100 and HV-300 HyperVision (HV) transducers.
The Raymarine Ray 63/73 1st Station Wireless Bundle includes the Ray 63/73 Wireless 1st Station including Wireless Handset, Wireless Hub, Active Speaker & adaptor cable.
The Raymarine Active Wireless Speaker is designed for high-noise areas. The rugged and waterproof housing is designed with vertical or horizontal mounting options. This active speaker is compatible with the Ray 63, 73, 90 and 91 VHF Radios.
Featuring 5 ethernet ports and a simple plug-and-play installation, it's easier than ever to share information across your Lowrance, Simrad or B&G network. Support for up to 1 gigabit high speed data transfer means you can expect smooth network performance across your boat’s system. Compact in design, the NEP-3 is ideal for installation in tight spaces.
The Navico Ethernet Extension cable measures 6ft (1.2m) and is designed for M12-toM12 connections. Compatible with Lowrance, Simrad and B&G.
The Navico Ethernet Extension cable measures 49.2ft (15m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.
The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno CHIRP, 12-pin transducers.
