Weather Station with No Moving Parts!
If you’re looking to receive accurate and dependable weather information, Furuno has done an outstanding job engineering this weather station to meet your needs. The 220WX Ultrasonic Weather Station is an all in one weather sensor that can measure apparent and true wind speed along with direction, air temperature, and wind chill temperature.
The Furuno 220WX Weather Station is able to detect instantaneous changes in weather with continuous operation even in diverse weather conditions.
The 220WX incorporates a 3-Axis solid-state compass and 3-Axis Rate Gyro for best in class compass and pitch and roll accuracy. The 220 supports NMEA 0183 and CanBus/NMEA 2000 and can be directly connected to a NMEA 2000 backbone via the incorporated NMEA2000 port. The 220WX would receive its power from the NMEA2000 network.
A Standard 1" mount accommodates existing mounted hardware. The UV stabilized, compact housing is fully waterproof and resistant to both chemicals and sunlight.
Furuno 220WX Box Contents
- 220WX Weather Station Module
- Threaded Adapter for Cable Side-Exit
- Threaded Mounting Adapter for Module
- Captive Nut
- Cable Assembly (6M) Drop
- Owners Guide and Installation Instructions
- One Year Warranty
Furuno 220WX Key Features
- Provides Important Weather Readings with No moving parts!
- Supports both CanBUS/NMEA2000 and NMEA0183
- Direct Connect to NavNet TZTouch and NavNet 3D
- Measures Apparent and True Wind Speed and Direction, air and wind chill temps
Product Accessories for Furuno 220WX Ultrasonic Weather Station

Maretron NMEA 2000 Micro T-Connector
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.

Maretron NMEA 2000 Backbone/Drop Cable 0.5 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.

Maretron NMEA 2000 Backbone/Drop Cable 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter

Maretron NMEA 2000 Backbone/Drop Cable 2 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.

Maretron NMEA 2000 Male Terminator
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

Maretron NMEA 2000 Starter Kit
Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.

Maretron NMEA 2000 Backbone/Drop Cable 1 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.

Maretron NMEA 2000 Backbone/Drop Cable 6 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.

Maretron NMEA 2000 Female Terminator
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

Maretron NMEA 2000 Power-Tee
The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length.

Maretron NMEA 2000 Micro Inline Terminator
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.