10-Inch Marine Instrument Display with Superior Readability!
The GNX 130 is designed for serious sailors who demand quality, precision, and total integration with superior readability during the day and night. This easy to set up, NMEA 2000 compatible display allows seamless data sharing between Garmin devices and is controlled from a compatible GNX keypad.
Whether it be day or night, the GNX 130’s bold 2.75” (70mm) digits can be read no matter the conditions you are facing on the water. The display also allows you to adjust the settings to always ensure superior visibility. And, there is no reason to worry about screen fog with its tightly glass-bonded high-contrast monochrome LCD display.
Five display configurations are available to display data for more than 50 important marine parameters for wind, sea, and vessel conditions (single, dual, triple, plus Gauge and Graph). A fully customizable user profile allows to you configure the screen layout to your preferred settings. And, data from Expedition software can be displayed on the instrument using a Actisense NGT-1 N2K USB or GND 10 (sold separately).
Garmin GNX 130 Marine Instrument Box Contents
- GNX 130
- Trim Piece Snap Cover
- Protective Cover
- Flush Mount Gasket and Hardware
- NMEA 2000 T-Connector
- NMEA 2000 Drop Cable
- Documentation
- 1-Year Warranty
Garmin GNX 130 Marine Instrument Key Features
- High-Precision Glass-Bonded Backlit LCD Display Avoids Fogging.
- Bold 2.75-Inch Digits are Largest in Class.
- Provides Necessary Data to Make Confident Decisions!
- 10-Inch Display Creates Beautiful ‘Glass Mast’ Display.
- NMEA 2000 Connectivity.
- Size: 9.8"W x 6.02"H x .75“D
Product Accessories for Garmin GNX 130 Marine Instrument
Garmin GPS 24xd NMEA2000 Multi-Band Antenna
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Garmin NMEA 2000 Starter Kit
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
Garmin NMEA 2000 Micro T-Connector
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Garmin NMEA 2000 Backbone/Drop Cable 2 Meter
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Garmin NMEA 2000 Multiport T-Connector
Garmin NMEA 2000 Multiport T-Connector.
Garmin NMEA 2000 Male Terminator
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Garmin GPS 24xd HVS NMEA 0183 Multi-Band Antenna
Garmin’s GPS24XD HVS GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes NMEA0183 Bare wire connection, under-deck, pole and surface mount options.
Garmin NMEA 2000 Backbone Cable 10 Meter
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
Garmin NMEA 2000 Backbone Cable 6 Meter
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).
Garmin NMEA 2000 Female Terminator
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Garmin NMEA 2000 Power Cable
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
Garmin GPS 24xd NMEA2000 Multi-Band Antenna Black
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Color: Black
Similar Products and Value Bundles
Garmin GNX 120 Marine Instrument
- GA01395
- MAN#010-01395-00
- ID#: 8245