Designed for Convenient Control of Autopilot
Simrad's AP44 Autopilot Controller is designed with ease of use in mind. A bright, optically bonded 4.1" color display allows for viewing in all weather conditions and provides a dedicated point for autopilot control when paired with a compatible Simrad Autopilot Core Pack.
A simple and Intuitive user interface is at the core of the AP 44. With only 4 buttons and a rotary dial advanced functions such as automated turn patterns which assist with fishing and diving or even just simple navigation and u-turns is all right at your fingertips when paired with the appropriate core pack. The AP44 is designed to keep you on course no matter where you are headed.
Another advanced feature built into the AP44 is the No Drift mode which integrates your GPS Receiver or Simrad Chartplotter via NMEA2000 for Navigation with auto-steering and enables you to keep a straight course no matter the winds or tide to your current heading without having to manually enter a waypoint.
Easy Set-Up with Auto Tuning and Calibration make the AP44 a top choice for autopilot control. No more taking hours to calibrate, the AP 44 offers automatic tuning and a simple onscreen commissioning including dockside configuration and sea trial.
Size: "4.64W x 4.52"H x 1.43"D
- 170-Degree Viewing Angle
- Continuum Steering Technology
- No Drift Steering Holds Position
- Depth Contour Tracking
- NMEA 2000 Connectivity
Product Accessories for Simrad AP44 Autopilot Controller
The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.
The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.
The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.
Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.
A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.
The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.
The NAC-2 Core Autopilot Core Pack from Simrad consists of the low-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit and is the perfect set-up for hydraulic and mechanical drives on smaller vessels up to 35’ in length.
Hydraulic Pump or Mechanical Drive Required
Get a 5% Instant Rebate on this Unit by Entering a Valid Email Address and Opting into our Email Offers at Checkout!
The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
A Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network.