7” UHD GPS preloaded with US Lake Maps and comes with an Ice Fishing Transducer!
The echoMAP UHD 73cv from Garmin provides a bright 7” key assisted touchscreen display with built-in Lakevu G3 maps with Navionics data covering over 17,000 lakes within the US with up to 1’ contours giving you a better understanding of the lake floor. A built-in high sensitivity GPS receiver will allow you to mark waypoints easily and allow you to get from point to point with ease. This Ice Fishing bundle includes the Garmin echoMap UHD 73cv, GT10HN-IF transducer, power cable, tilt swivel mount, a portable bag with handle, 7Ah rechargeable battery, foam float, and battery charger, giving every angler all that’s needed for locating fish with ease.
The included GT10HN-IF transducer provides 500w high-narrow CHIRP sonar (130-300kHz) image for exceptional clarity, target separation, and detailed images below the ice. The narrow 8-16 degree beam angle and overall shape of this transducer has been optimized for ice fishing and offers precise fish and jig detection. Built to last, the GT10HN-IF is made with a silicone coated cable that remains flexible in harsh winter conditions.
- ECHOMAP UHD 73cv
- GT10HN-IF transducer
- Power cable
- Tilt/swivel mount
- Portable fishing kit – Includes Bag with handle, Foam float, Rechargeable battery and Battery charger
- Two Year Warranty
- 7” GPS with Preloaded Lake Maps
- Included GT10 High Narrow Ice Fishing Transducer for exceptional images under the ice
- Upgraded flasher user interface for ease of use and superior readout
- NMEA2000 Compatible
- Supports the Full line of Panoptix Transducers
- Size: 9.8"W x 5.5"H x 2.0“D
Product Accessories for Garmin ECHOMAP UHD 73cv Ice Fishing Bundle
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus and echoMAP UHD Chartplotter Fishfinders.
Garmin NMEA 2000 Multiport T-Connector.
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters.
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and UHD 72cv, 73cv, 74cv and 75cv.
7" echoMAP Plus and echoMAP UHD ClearVu (cv) Models only!
Garmin's ECHOMAP Plus and UHD 7xcv Boat kit comes with everything you need for a second station setup. Includes GT22HW-TM Transducer, Tilt/swivel mount with quick-release cradle and Power/data cable.
Similar Products and Value Bundles
Order this unit AND a BlueChart g3 Vision Card now through July 4th, 2021 and get a $200 Mail-in rebate from Garmin.
- ID#: 6473
- ID#: 6458