Garmin GHP Reactor 40 Hydraulic Autopilot with SmartPump

Garmin GHP Reactor 40 Hydraulic Autopilot with SmartPump

Garmin’s GHP Reactor 40 with Smartpump offers a complete Autopilot package and eliminates the guesswork when it comes to matching a pump to your boat with the one-sized fits most pump. Compatible with steering cylinder sizes from 4-24 cu inches, the GHP Reactor is Garmin’s “Most Responsive Autopilot”
GA0070569   MAN#: 010-00705-69   ID#: 4355
(Rating 91)
Our Price: $4,099.99
Availability: In Stock
Condition: Brand New

Keep your Course even in Rough Seas with Garmin’s GHP Reactor 40 with SmartPump!

 

Garmin has removed the need for a boat owner to know what the size of his hydraulic steering cylinder with their Reactor 40 Autopilot with Smart Pump. When selecting an autopilot for a hydraulic steering system previously, it was necessary for the person doing the installation to know the volume of fluid held in the steering cylinders. This was necessary to match the pump in the autopilot to move the fluid in the steering cylinder to turn the boat. Too much of a pump and the captain could suffer a “hard over” event and lose control or the pump is not high enough in volume to displace enough fluid to affectively turn the vessel.

Garmin with the GHP Reactor40 Autopilot with SmartPump has virtually eliminated this issue with just one intelligent pump that senses the amount of hydraulic fluid to move to steer your boat safely. The Reactor Autopilot itself requires minimal commissioning and Call for Help with Marine Electronicscalibration after installation reducing the time from twenty minutes to just 5 minutes. The GHP Reactor 40 Autopilot with SmartPump utilizes a feature called Intelligent Rudder Rate Technology (IRRT), which actually slows the rudder rate when the vessel is at high speeds and speeds up rudder rate when the vessel is at lower speeds to provide optimal performance and safety in all conditions.

The Reactor 40 in the name of this autopilotrefers to its ability to its ability to react to whatever the sea conditions are, whether they are calm or the boat is pitching in heavy seas, to hold the course programmed into it. Of course Garmin’s Shadow Drive technology is part of the GHP Reactor40 Autopilot with SmartPump, so you can rest assured you have complete control while the autopilot is engaged. When you network a compatible Garmin chartplotter with the Reactor Autopilot with SmartPump and add a G2 Vision chart you can enjoy additional features like ‘auto guidance” which automatically steers GPS Paths.

The GHP Reactor Autopilot with SmartPump removes a lot of the setup and research necessary to selecting and installing an autopilot, while providing the latest and greatest in autopilot technology.

Garmin GHP Reactor 40 with SmartPump Details
Each Garmin GHP Reactor 40 with SmartPump comes with:GHP SmartPump, GHP Reactor CCU (Course Computer Unit), GHC 20 helm control display, ECU (Electronic Control Unit) power cable, Interconnect cable, Shadow Drive, Buzzer, NMEA 2000 drop cables (2 meters), NMEA 2000 power cable, NMEA 2000 T-connectors, Male and female terminators, Documentation and a Two-Year Warranty.
Display Size:4.3"W x 4.4"H x 1.9"D
SmartPump Size:7.5"W x 7.75"H x 9.75"D
Garmin GHP Reactor 40 with SmartPump Special Features
  • Intelligent Rudder Rate Technology
  • Full integration with Garmin Plotters
  • Minimal Setup
  • Reacts to Sea conditions
  • Smart Pump eliminates the need to spec out pump size

Share

Pin It

Product Accessories for Garmin GHP Reactor 40 Hydraulic Autopilot with SmartPump

Garmin NMEA 2000 Micro T-Connector
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
GAX11078
Your Price:$19.95
Garmin NMEA 2000 Starter Kit
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
GAX11442
Your Price:$84.95
Garmin NMEA 2000 Backbone/Drop Cable 2 Meter
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
GAX11076
Your Price:$19.95
Garmin NMEA 2000 Female Terminator
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
GAX11081
Your Price:$10.95
Garmin NMEA 2000 Male Terminator
The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
GAX11080
Your Price:$10.95
Garmin NMEA 2000 Power Cable
The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.
GAX11079
Your Price:$18.95
Garmin NMEA 2000 Backbone Cable 6 Meter
This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters.
GAX110761
Your Price:$29.95
Garmin NMEA 2000 Backbone Cable 10 Meter
This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.
GAX110762
Your Price:$32.95
Garmin GHC Wireless Autopilot Remote - Black
The Garmin GHC Autopilot Remote provides full functionality of your Garmin GHP10, GHP 20 and GHP Reactor Autopilot from the palm of your hand from up to 45 feet away. Color: Black
GA1114620
Your Price:$249.95
Garmin GRF 10 Rudder Feedback Sensor
Paired with a GHP20, GHP12 ore Reactor Garmin’s GFR 10 will provide rudder position and detect and avoid rudder stops while on the water. Magnetic sensor relays position information so that you know where the rudder is without having to guess.
Order Now and Get Free UPS Ground Shipping!
GAX11829
Your Price:$219.95
Garmin NMEA 2000 Cable for Garmin Marine Heading Sensor
Garmin 6 meter NMEA 2000 Cable for Garmin Marine Heading Sensor
GAX11419
Your Price:$94.95
Garmin NMEA 2000 Network Updater
The Garmin NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot.
GAX11480
Your Price:$74.95