Garmin’s “Most Responsive Autopilot System on the Water”
The GHP Reactor 40 Hydraulic Autopilot Corepack from Garmin is compatible with any Garmin hydraulic pump to provide an autopilot experience typically found only on larger commercial vessels. The Reactor 40 Hydraulic Corepack incorporates a solid state 9 Axis Attitude Heading Reference System (AHRS) that enables you to mount the Corepack virtually anywhere and in any orientation and still receive optimum performance, minimizing heading error, course deviation, rudder movement, and power consumption, all while providing a more comfortable ride for all onboard. Of course the Reactor 40 Autopilot Corepack includes Garmin’s patented Shadow Drive Technology which allows the Captain to take control of the helm and steer the vessel and then by just holding a steady course it will reengage.
The Reactor40 Autopilot Corepack offers sailing features including heading hold, wind hold, tack/jibe, and step turns. Not sure about the size of the hydraulic pump you may need then take a look at the GHP Reactor Hydraulic Autopilot Corepack with Smart Pump V2, to assure you have a pump that can move enough fluid to steer you boat. The Reactor 40 Autopilots are fully compatible with a large number of Garmin chartplotters to easily share heading data that can be used with BlueChart® g3 Vision® charts or Garmin Navionics Vision+ charts (sold separately), to gain optional features like Auto Guidance, which automatically steers GPS paths based on safe navigation and boat specs.
The included Garmin GHC 50 Marine Autopilot Instrument allows you to navigate with ease! The GHC 50 has an intuitive design and sunlight readable 5" touchscreen with edge-to-edge glass display, matching GPSMAP x3 and GPSMAP 8600 series displays. The high-resolution (800 x 480) WVGA display provides a top notch viewing experience in any marine conditions.
This amazing Autopilot reacts to all sea conditions to hold a steady course even when pitching and rolling in rough seas. With the Reactor Autopilot you can remain confident that you are being steered on your desired course.
*Replaces Garmin 010-00705-15
- Reactor 40 CCU (Course Computer Unit)
- GHC 50 Helm Control Display
- ECU (Electronic Control Unit)
- ECU Power Cable
- Interconnect Cable
- Shadow Drive
- NMEA 2000 Drop Cables (2 meters)
- NMEA 2000 Power Cable
- NMEA 2000 T-connectors
- Male and Female Terminators
- Features 9-Axis AHRS Compass
- Reacts to Sea Conditions
- Fast and Easy Calibration
- Includes GHC 50 Display for an Enhanced Experience
- GHC 50 Features a 5-Inch Touch Display
- Size: Without Suncover-4.13"W x 4.51"H x 2.01“D, With Suncover- 4.45”W,5.67”H x2.20”D
Product Accessories for Garmin Reactor 40 Hydraulic Autopilot Corepack with GHC 50
Control your Garmin Reactor Autopilot right from a remote. This rugged and water resistant remote provides the ultimate onboard control and convenience. Control steering and even use the remote for heading hold and course corrections! (compatible with Compact Reactor, Reactor 40 Steer by Wire and Reactor 40 Hydraulic)
The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.
The Garmin 1.2L Pump for the Reactor 40 Autopilot is designed as an affordable option for single-cylinder applications with cylinder volumes from 6 to 14 cubic inches. An autopilot pump is required to make a complete Reactor 40 Autopilot system.
The Garmin SeaStar Fittings Kit is used for plumbing your Garmin Hydraulic Autopilot to most SeaStar Steering System.
The Garmin 2L Pump for the Reactor 40 Autopilot is designed for boats with hydraulic steering between 10 and 24ci. An autopilot pump is required to make a complete Reactor 40 Autopilot system.
Similar Products and Value Bundles
- ID#: 7140