Veratron Marine Electronics

The Veratron LinkUp 0-5V Gateway provides a 5V source for passive sensors and transmits to the NMEA 2000 Standard. This NMEA 2000 certified gateway is approved for engine compartments and features a plug and play installation. Compatible sensors include liquid levels, trim tabs, rudder angle, temperature or pressure sensors.

The VMH-35 D is specifically designed to help monitor diesel engines. This compact display is capable of showing a wide range of data from your engine, battery tank and GPS. With an embedded high-performance GPS and Analog/CAN to NMEA 2000 gateway- it is an ideal addition to your marine suite or as a standalone solution!

The Veratron VLFlex 52 NMEA 2000 1.4” Round Display is an all-in-one gauge that supports a broad range of sensors. The VL Flex 52 supports input from analog, NMEA 2000 and LIN 2.0 data sources. Set your display to show single or dual layout, pulling from more than 20 sets of data!
Color: Black

The Veratron VLFlex 52 NMEA 2000 1.4” Round Display is an all-in-one gauge that supports a broad range of sensors. The VL Flex 52 supports input from analog, NMEA 2000 and LIN 2.0 data sources. Set your display to show single or dual layout, pulling from more than 20 sets of data!
Color: White

The VMH-14 instrument is designed to be easily configured to suit your needs. This sunlight readable display supports a variety of data types received from any VMH or OceanLink master device. Every master device can control up to 16 VMH-14 displays.
Master device required, sold separately

The Veratron GO GPS module is a GPS/GLONASS/Galileo receiver and antenna with NMEA 2000 certification. The GO is the smallest NMEA 2000 GNSS antenna on the market with a 60.7mm diameter and small installation footprint. This 10Hz GPS receiver’s cold-start position fix is a mere 30 seconds making it a very high sensitivity GPS receiver!

The resistive-type LinkUp gateway provides an easy way to convert vessel and engine information to NMEA 2000. The LinkUp device is NMEA 2000 compliant while working to replace original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone. Configuration is simple with the LinkUp Configurator App.

The LinkUp J1939 provides an easy way to bridge CAN engine data transmitted through J1939 to the NMEA 2000 standard. The LinkUp device is NMEA 2000 compliant making vessel and engine data available for any NMEA 2000 capable display. Configuration is simple with the LinkUp Configurator App.

The VMH-35 features a black-glass design with stylish brushed stainless-steel ring. This new generation of sunlight readable color hybrid displays has an integrated high-performance GNSS receiver and is NMEA 2000 certified. An embedded analog to NMEA 2000 gateway eliminates the need for an additional external converter making the VMH-35 ideal for refitting with older engines!

The OceanLink 7-Inch Display is a multifunction powerhouse designed to help you monitor engine data and related sensor information. Monitor up to 4 engines with a single display! The integrated NMEA 2000 gateway easily receives data via analog or J1939 and distributes them via NMEA 2000. This versatile display is ideal for those seeking a single display for all of their vessel data!

The OceanLink Master 4.3-Inch Display is a multifunction display designed to help you monitor engine data and related sensor information. Monitor up to 4 engines with a single display! The integrated NMEA 2000 gateway easily receives data via analog or J1939 and distributes them via NMEA 2000. This versatile display is ideal for those seeking a single display for all of their vessel data!

The Veratron GO Plus GPS module is a combined GPS/GLONASS/Galileo receiver and NMEA 2000 to Bluetooth gateway. The GO is the smallest NMEA 2000 GNSS antenna on the market with a 60.7mm diameter and small installation footprint. This 10Hz GPS receiver’s cold-start position fix is a mere 30 seconds making it a very high sensitivity GPS receiver!

The VMH-70 multifunctional display monitors your boat engines and navigation data! Up to 4 engines can be monitored with a single display. The integrated NMEA 2000 gateway allows you to receive data via analog or J1939-this data is then converted and distributed via NMEA 2000.

The Veratron VLFlex 52 is an all-in-one 1.44” round gauge that supports input from analog sensors, J1939 and LIN 2.0. The sunlight readable display can be set to single or dual layout and can pull from up to 30 sets of data! Setup is simple and easy with configuration via a mobile device and the companion Veratron app.
Color: White

The Veratron VLFlex 52 is an all-in-one 1.44” round gauge that supports input from analog sensors, J1939 and LIN 2.0. The sunlight readable display can be set to single or dual layout and can pull from up to 30 sets of data! Setup is simple and easy with configuration via a mobile device and the companion Veratron app.
Color: Black

The VMH 35 is a premium marine gauge with black-glass design and brushed stainless-steel ring. The embedded NMEA 2000 gateway distributes sensor data such as fuel, trim and tachometer to other NMEA 2000 devices including chartplotters. The integrated GPS makes the VMH 35 ideal for navigation while the Veratron IBS input port provides critical 12V battery monitoring!

The Veratron LinkUP Gateway for Intelligent Battery Sensor (IBS) informs you about the current status of your battery to support energy management planning. Receive real-time measurements allowing you to prevent over charging and overheating! The sensor delivers battery voltage, battery current, battery temperature, State of Charge, State of Health and Autonomy. This gateway easily integrates engine readings to your NMEA 2000 network. Setup is completed using your mobile device and the LinkUP Configurator app.

The Veratron LinkUP Gateway for Intelligent Battery Sensor (IBS) informs you about the current status of your battery to support energy management planning. Receive real-time measurements allowing you to prevent over charging and overheating! The sensor delivers battery voltage, battery current, battery temperature, State of Charge, State of Health and Autonomy. This gateway easily integrates engine readings to your NMEA 2000 network. Setup is completed using your mobile device and the LinkUP Configurator app.

The Veratron LinkUP Gateway for Intelligent Battery Sensor (IBS) informs you about the current status of your battery to support energy management planning. Receive real-time measurements allowing you to prevent over charging and overheating! The sensor delivers battery voltage, battery current, battery temperature, State of Charge, State of Health and Autonomy. This gateway easily integrates engine readings to your NMEA 2000 network. Setup is completed using your mobile device and the LinkUP Configurator app.

The Veratron LinkUp Pyrometer is specifically designed to interface the Veratron Pyrometer Thermocouple. The high precision probe measures exhaust gas temperature. Benefits include early warning of situations that are potentially dangerous to the engine! Enjoy easy plug-and-play connection via NMEA 2000.

The LinkUp 2-in-1 Sensor combines oil temperature and pressure sensing in a single sensor! This compact sensor is designed for harsh environments and features an IP69 protection class. Values are sent over the NMEA 2000 network to your compatible display! Configurable parameters include sensor type (engine oil/gear oil), Sensor Instance and Alarm Threshold.

The Veratron GO Data is a NMEA 2000 to Bluetooth gateway. Together with the Veratron app, you can monitor your engine, read sailing data, monitor battery status and receive alarm notifications via Bluetooth. The GO Data can support up to 7 simultaneous connections and your data is passkey protected.

The NMEA 2000 Wind Sensor provides precise and reliable wind speed and wind angle data to AquaLink systems or other compatible systems. It provides a fast response to changes in wind conditions due to the contactless constructive method which minimizes the rotational friction of the wind vane and rotor cups. The sensor is NMEA 2000 certified making installation plug-and-play!