GPSMAP 72x/74x Series

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Garmin Marine Network Cable (20').

Garmin Marine Network Cable (6').

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Garmin Heavy Duty Transom Mount with Spray Shield

Protect your Garmin GPSMAP 7x3 series GPS display from scratches and sun when not in use!

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.

Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.

Looking for a replacement surface mount for your GPSMAP 720/740 series GPS Plotter/Sounder units. Garmin's 010-11483-00 is the exact mount that came with your unit originally. Includes Bail Mount and Knobs.

The Garmin NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot.

Garmin Marine Network Cable (40').

Flush Mount Kit for Garmin GPSMAP 7x1 / 7x1xs & echoMap 70 Series.

Garmin Flat Mount kit for echoMap 70 series and GPSMAP 7x1 / 7x1s series. Give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.

Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.

Second Mounting Station for Garmin GPSMAP 7X1/7X1s and echoMap 70s Series. Bracket and Wiring harness included.

Lost of Missing Protective Cover for your GPSMAP 7x1, 7x1xs or echoMap 70 Series? The Garmin 010-11972-00 is the exact protective cover that came with your unit originally.