GPSMAP 8x0/10x0 Series

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin Marine Network Cable (20').

Garmin Marine Network Cable (6').

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Garmin Heavy Duty Transom Mount with Spray Shield

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

Garmin 8-Pin Power Cable for GPSMAP 8x0, 8x0xs, 10x0, 10x0xs, 12x2 Touch, 7400, 7400xvs, 7600, 7600xsv and 1643 Series Chartplotter and Chartplotter/Fishfinder Models

The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.

Garmin Marine Network Cable (40').

Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.

The Garmin NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot.