Interface Cables and Connectors

Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 5 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 20 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 9 Meter.

Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm

Network two Raynet devices together with the Female/Female Cable. Length 2M

Network two Raynet devices together with the Female/Female Cable. Length 10M

Network two Raynet devices together with the Female/Female Cable. Length 5M

Network two Raynet devices together with the Female/Female Cable. Length 20M

Raymarine SeaTalkNG T-piece connector.

Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.

View Video on Your Compatible Lowrance HDS Gen2 Touch 9 and 12" units and HDS Carbon.

Simrad 13' Female Micro-C NMEA 2000 Connector to Simnet Connector.

Network two Raynet devices together with the Female/Female Cable. Length 400mm

The Raymarine ITC-5 converts analogue transducer signals for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass to SeaTalk NG eliminating the need for multiple ST70 Pods.

Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.

Share user data such as waypoints and routes with other compatible Garmin devices with this 10 meter data sharing cable.

The Actisense 1 Meter NMEA 2000 cable can be used to extend your NMEA 2000 backbone or used as a drop cable.

The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.

The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.

The Raymarine 0.3M Daisy Chain for Alpha Displays allows you to connect up to 4 Alpha Performance Displays together to create the ultimate data display.
Cable Length: 0.3M

The Raymarine 1M Daisy Chain for Alpha Displays allows you to connect up to 4 Alpha Performance Displays together to create the ultimate data display.
Cable Length: 1M

The JL Audio Connection Cable allows you to easily connect non-NMEA 2000 remote controllers with a MediaMaster source unit. The JL Audio MMC-25 cable is 25 feet long.

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 1.8m (6ft).

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 15m (49.2ft).

The Navico Ethernet Extension cable measures 16.5ft (5m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.

The Navico Ethernet Extension cable measures 49.2ft (15m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Bare Wires is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and provides bare wires on the other side.

Adapt a Garmin BlueNet Network Connector on your Garmin device to the Garmin Marine Network Connector with this convenient cable. This cable is an RJ45 (Female) to BlueNet (Female) adapter.