Standard Horizon SSM-517A Earpiece Microphone. Compatible with HX210, HX280S, HX290,HX370S, HX380, HX40, HX400, HX851, HX870 and HX890.
The Garmin Power Actuator Cable is required when connecting a third party pump to a Garmin autopilot.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Vesper Marine SP 160 AIS / VHF / FM Antenna Splitter is used to share a single VHF antenna for both VHF radio and an AIS receiver or transponder. The SP160 is designed to work with popular Vesper products and may also be used to increase the performance of other manufacturers’ AIS receivers and transponders!
Position your Panoptix LiveScope LVS34 transducer on this 8° pole mount for an optimal viewing angle while ice fishing or open water fishing!
For Livescope Plus LVS 34 Transducer Only!
Use this wire block to adapt your bare wire transducer to a 9-Pin X-Sonic connector.
Protect your Simrad Cruise 7 from the elements! Simrad protective cover for Simrad Cruise 7-inch displays.
Icom MB75 Flush Mounting Bracket for M502/M504/M506/MA510TR/M602/M604/M605/M803.
The Furuno HUB101 is the center of your NavNet 3D system or TZTouch/TZTouch2 Systems connecting all of your displays and components together and allowing for the distribution of information across the network.
Icom AT 140 HF Automatic Antenna Tuner.
The Icom OPC1147 is a shielded control cable used to connect the AT140 tuner to the Icom M802 Single Side Band Radio.
The Poly-Planar MB21 Waterproof VHF Speaker is perfect for any open or express boat where noise is a concern. This 2" speaker provides clear sound from your fixed mount vhf.
The Sitex Transom Mount Dual Frequency, 600W Transducer provides accurate depth, speed and temperature readings to your Sitex CVS-126, CVS-1410, SVS-650 fishfinder, SVS560CF or SVS-760CF.
(Depth/Speed/Temp)
The Lowrance Transom Mount Skimmer Transducer, HST-DFSBL has a sleek design for better water flow which leads to more accurate depth readings. 50/200khz Dual Frequency. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)
Garmin Power Cable for 42xs, 43xs, 44xs, 52xs, 53xs and 54xs Series Chartplotter/Sounders. Replacement part.
Garmin Power Cable for 4000 and 5000 Series Network Systems. Replacement part.
This Furuno cable is dual purpose it is the Power Cable for an FCV 620/585 and also the NMEA 0183 for GP33. Cable will not provide power to a GP-33.
The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Garmin Marine Network Cable (40').
The Lowrance 106-72, HST-WSBL, is a 83/200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable.
Furuno Power Data Cable for FCV 600L, FCV 582L, and 7000
Furuno Power Data Cable for GP31, GP32 and GP37.
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
The Raymarine Masthead System provides accurate wind speed and direction. Includes Masthead only. Compatible with ST60+.
The Icom HM195 Command mic IV offers full control of your Icom M424 or M506 VHF Radio from a remote location like a bridge or salon. The HM 195 can also be used as an intercom with the M424.
The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.
Stainless Steel Mic Clip. 1 3/8 Wide x 1 13/16 Tall.
Fusion Silicone Dust Cover (Gray) for 650/750 Series.
This Furuno Cable will allow you to connect two network units together or connect to a network hub.
Furuno Clip-on Plastic Transom Mount Speed and Temperature Sensor
The Lowrance 25ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.
Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers
This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 400mm.
Network two Raynet devices together with the Female/Female Cable. Length 10M
Network two Raynet devices together with the Female/Female Cable. Length 20M
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
View Video on Your Compatible Lowrance HDS Gen2 Touch 9 and 12" units and HDS Carbon.
Garmin Protective Cover for 8015 and 8215 Series.
Replacement part.
NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.
Get a 5% Instant Rebate on this Unit by Entering a Valid Email Address and Opting into our Email Offers at Checkout!
Simrad NSE Video/Comms Cable (8 pin conn. to bare wires for NMEA and 2 RCA female for Video in Port one and two) 2 Meters.
Replacement Speed Wheel for P66 Transducers.
Garmin 8-Pin Power/Data Cable for Select echoMAP and GPSMAP Series Chartplotter/Fishfinders.
Lost of Missing Protective Cover for your GPSMAP 5x7, 5x7xs or echoMap 50s Series? The Garmin 010-11971-00 is the exact protective cover that came with your unit originally.
Garmin 8-Pin 10' Transducer Extension Cable.
Lost of Missing Protective Cover for your GPSMAP 7x1, 7x1xs or echoMap 70 Series? The Garmin 010-11972-00 is the exact protective cover that came with your unit originally.
Raymarine's Seatalk NG Terminator is used to begin or end your Seatalk NG Network Backbone.
The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.
Garmin's 010-11612-00 adapter allows you to connect newer 8-pin transducers to Garmin GPS Units that require a 6-pin connector.
_t.jpg)
