NMEA 2000 Components

This NMEA 2000 P79 In Hull (up to 22 degree deadrise) smart sensor provides digital depth to any existing NMEA 2000 network. The P79 includes a 6 Meter NMEA 2000 cable and NMEA 2000 T Connector.

The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.

The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.

The Actisense NMEA 2000 Field Fit Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Actisense 10 Meter NMEA 2000 cable can be used to extend your NMEA 2000 backbone cable. This cable can not be used as a drop cable.

The Navico NMEA 2000 Remote Button is an easy to install button allowing for convenient placement for an emergency Man-Overboard (MOB) button. This button can trigger alerts across a NMEA 2000 system and devices.
See device compatibility below.

The Veratron GO GPS module is a GPS/GLONASS/Galileo receiver and antenna with NMEA 2000 certification. The GO is the smallest NMEA 2000 GNSS antenna on the market with a 60.7mm diameter and small installation footprint. This 10Hz GPS receiver’s cold-start position fix is a mere 30 seconds making it a very high sensitivity GPS receiver!

The resistive-type LinkUp gateway provides an easy way to convert vessel and engine information to NMEA 2000. The LinkUp device is NMEA 2000 compliant while working to replace original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone. Configuration is simple with the LinkUp Configurator App.

The OceanLink Master 4.3-Inch Display is a multifunction display designed to help you monitor engine data and related sensor information. Monitor up to 4 engines with a single display! The integrated NMEA 2000 gateway easily receives data via analog or J1939 and distributes them via NMEA 2000. This versatile display is ideal for those seeking a single display for all of their vessel data!

The VMH-70 multifunctional display monitors your boat engines and navigation data! Up to 4 engines can be monitored with a single display. The integrated NMEA 2000 gateway allows you to receive data via analog or J1939-this data is then converted and distributed via NMEA 2000.

The B&G Vulcan 7R is an easy-to-use multi-touch display with dedicated sailing features! This bright, 7-inch display supports NMEA 2000 and is an ideal addition to your B&G electronics package. Add sailing instruments, sensors, autopilot and more to create a complete system that suits you!

View Important instrument data such as Speed, Depth, Wind, Heading, AIS Targets and more on this 4.1”optically bonded, LCD Display. NMEA2000 Certified, the Triton2 Display can be integrated into a more advanced system or used as a standalone display.

Navico's emergency Man-Over-Board (MOB) button is simple to install and connects to your compatible device via NMEA2000. By simply pressing the button, a MOB waypoint will automatically be created and provide navigation data to reach the MOB position.

View all your important sailing data on this bright 9" IPS SolarMAX™ HD display! Mount nearly anywhere and see what you need to see when you need to see it. Touch screen control, the dual orientation Nemesis 9 can be mounted horizontally or vertically and offers adjustable data sizes, palettes and a backlight offers excellent visibility in all conditions.

The Veratron VLFlex 52 is an all-in-one 1.44” round gauge that supports input from analog sensors, J1939 and LIN 2.0. The sunlight readable display can be set to single or dual layout and can pull from up to 30 sets of data! Setup is simple and easy with configuration via a mobile device and the companion Veratron app.
Color: White

The Veratron VLFlex 52 is an all-in-one 1.44” round gauge that supports input from analog sensors, J1939 and LIN 2.0. The sunlight readable display can be set to single or dual layout and can pull from up to 30 sets of data! Setup is simple and easy with configuration via a mobile device and the companion Veratron app.
Color: Black

The VMH 35 is a premium marine gauge with black-glass design and brushed stainless-steel ring. The embedded NMEA 2000 gateway distributes sensor data such as fuel, trim and tachometer to other NMEA 2000 devices including chartplotters. The integrated GPS makes the VMH 35 ideal for navigation while the Veratron IBS input port provides critical 12V battery monitoring!

The Veratron LinkUP Gateway for Intelligent Battery Sensor (IBS) informs you about the current status of your battery to support energy management planning. Receive real-time measurements allowing you to prevent over charging and overheating! The sensor delivers battery voltage, battery current, battery temperature, State of Charge, State of Health and Autonomy. This gateway easily integrates engine readings to your NMEA 2000 network. Setup is completed using your mobile device and the LinkUP Configurator app.

The Veratron LinkUP Gateway for Intelligent Battery Sensor (IBS) informs you about the current status of your battery to support energy management planning. Receive real-time measurements allowing you to prevent over charging and overheating! The sensor delivers battery voltage, battery current, battery temperature, State of Charge, State of Health and Autonomy. This gateway easily integrates engine readings to your NMEA 2000 network. Setup is completed using your mobile device and the LinkUP Configurator app.

The Veratron LinkUp Pyrometer is specifically designed to interface the Veratron Pyrometer Thermocouple. The high precision probe measures exhaust gas temperature. Benefits include early warning of situations that are potentially dangerous to the engine! Enjoy easy plug-and-play connection via NMEA 2000.

The LinkUp 2-in-1 Sensor combines oil temperature and pressure sensing in a single sensor! This compact sensor is designed for harsh environments and features an IP69 protection class. Values are sent over the NMEA 2000 network to your compatible display! Configurable parameters include sensor type (engine oil/gear oil), Sensor Instance and Alarm Threshold.

The Veratron LinkUp 0-5V Gateway provides a 5V source for passive sensors and transmits to the NMEA 2000 Standard. This NMEA 2000 certified gateway is approved for engine compartments and features a plug and play installation. Compatible sensors include liquid levels, trim tabs, rudder angle, temperature or pressure sensors.

The Veratron GO Data is a NMEA 2000 to Bluetooth gateway. Together with the Veratron app, you can monitor your engine, read sailing data, monitor battery status and receive alarm notifications via Bluetooth. The GO Data can support up to 7 simultaneous connections and your data is passkey protected.

The NMEA 2000 Wind Sensor provides precise and reliable wind speed and wind angle data to AquaLink systems or other compatible systems. It provides a fast response to changes in wind conditions due to the contactless constructive method which minimizes the rotational friction of the wind vane and rotor cups. The sensor is NMEA 2000 certified making installation plug-and-play!