Free 2-Day Air on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
The Seaview Starlink mount is the perfect direct surface mount kit for your Starlink Mini Antenna. Built for the marine environment with durable materials, the Starlink mount is also appropriate for RV's, vans, UTV's and trucks!
Mounting Knobs for HDS Gen2 and Gen3 Touch and Elite 7 and Elite 9 Series Gimbal Bracket.
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
Garmin Heavy Duty Transom Mount with Spray Shield
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
Looking for a second Bail Mount for your 7" or 9" Garmin echoMap DV or SV model? Garmin's 010-12233-03 Bail Mount with Knobs is the exact Mount that came with your echoMap 7XDV, 7XSV and 9XSV Model. Includes quick cable disconnect feature allowing you to plug all necessary cords into the bracket for easy removal and re-install of your unit.
Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.
If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models!
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
The Seaview Modular Aft Mount and Plate with Light Bar Bundle includes the standard Seaview 5" Aft Raked Modular Radar Mount Base, Seaview Modular Plate for Dome Radars, Seaview Light Bar and the Seaview Combination Mast Head All Around LED Light.
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
Shakespeare 4710 SS GPS 1.5" antenna mount for GPS.
Garmin Kick Up Bracket for 010-10272-00 transducer(replacement)
Garmin Flush Mount for STRIKER 5dv/5cv and STRIIKER Plus 5cv Fishfinder. Includes mounting hardware, instructions and template.
Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 7-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.
Shakespeare 4365 4" SS GPS antenna mount
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Standard Horizon MMB-97 Flush Mount Kit for GX1600, GX1700, GX1800, GX1800G, GX1850 and GX1850G Fixed Mount VHF Radios
Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs
Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.
Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.
Furuno Overhead Display Mount for Furuno FCV620, 627, 628, 585, 587, 588 and Furuno 1815 Radar Display. Includes RAM Mount, Screws, Washer and Nut.
The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.
Garmin's In-Hull Transducer Mounting Kit is the perfect solution for Kayak Fisherman. Compatible with Garmins's HD-ID (77/200kHz) or GT20-TM(77/200kHz) Transducers (Sold Separately) this in-hull mount allows includes adhesive that attaches and conforms to the inside of the kayaks hull.
Looking for a replacement or additional mount for your 4" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with Garmin echoMAP 43/44dv, echoMAP CHIRP 42/43/44/45dv and echoMAP Plus 42/43/44/45cv models.
Secure your Striker Plus 9sv with this compatible tilt mount.
Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.
Seaview Modular Plate for Dome Radars provides you with a plate to mount your radar onto. The Seaview plate is designed to be mounted to a Seaview Base Mount.
The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Color: White
Icom MBF-7 Flush Mounting Bracket for M510 Series VHF Radios.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.
Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!
Mast Mount your B&G Nemesis 9 Sailing Display with this Mast Mount Bracket.
Shakespeare 4700 6-Inch SS Extension
Shakespeare 4700-1 12 inch SS Extension
Flush Mount Kit for Garmin 400 Series.
Shakespeare 410 R Mounting kit for Large SSB and VHF Antennas
Furuno Display Mounting Knob - 2 pieces required
Gimbal bracket for All Elite 7, Hook 7, HOOK Reveal 7" and HDS7 Touch Gen2 and Gen3 Models, includes two knobs.
Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.
Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.
