Interface Cables and Connectors

Garmin Marine Network Cable (6').

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin Marine Network Cable (20').

The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.

Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Female Adapter Cable

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 400mm.

Raymarine SeaTalkNG T-piece connector.

NEP-2 Network Expansion Port compatible with All Lowrance HDS / HDS Gen2 / HDS Gen2 Touch and Simrad NSS / NSE/ NSO Series.

Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.

Garmin Marine Network Cable (40').

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 3 Meter.

Network two Raynet devices together with the Female/Female Cable. Length 2M

Network two Raynet devices together with the Female/Female Cable. Length 10M

This cable is used to connect units with RayNet networks to speak with units with SeaTalk HS networks.

Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.

Connect 2 Marine Network cables end to end with the Garmin 010-10580-00 Cable Coupler.

Raymarine's Seatalk NG Terminator is used to begin or end your Seatalk NG Network Backbone.

The Lowrance 6ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices with Yellow Connectors.

Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Male Adapter Cable 1M.

Furuno's IF-NMEA2k2 converts NMEA 0183 data into NMEA 2000 / CAN bus data and vice versa allowing them to talk and listen to each other. The IFNMEA2k2 also includes a High Speed Mode and AIS Mode to convert sensor data optimizing conversion speed.

The Airmar 6-Conductor Splice makes splicing 6-strand wire together fast, easy, clean and secure.

The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.

The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.

Convert NMEA 0183 data into NMEA 2000 data and vice versa allowing them to talk and listen to each other. The NGX-1-ISO is equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port / DB-9.

The JL Audio Connection Cable allows you to easily connect non-NMEA 2000 remote controllers with a MediaMaster source unit. The JL Audio MMC-25 cable is 25 feet long.

Furuno NavNet Hub Adapter Cable, 6P(M) - RJ45(M), 0.5 Meters

Furuno NMEA Cable, 1 x 7 Pin Connector, 5 Meters

Furuno NMEA Cable, 1 x 6 Pin Connector, 5 Meters.

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

This Furuno Cable will allow you to connect two network units together or connect to a network hub. 2M total length with RJ45 connectors on both ends.

This Furuno Cable will allow you to connect a NavNet compatible devices to a network hub. 0.5M total length with a 6 Pin to RJ45 connectors on each end.

The Lowrance 15ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

Raymarine SeaTalk HS Dual End Weatherproof Network Cable 1.5M

Furuno Power Data Cable for FCV 600L, FCV 582L, and 7000

Raymarine Seatalk High Speed 1.5m Cable

Raymarine Seatalk High Speed 5 Meter Cable

Raymarine RayNet to SeaTalk HS Network Cable 1 Meter

Raymarine RayNet to SeaTalk HS Network Cable 3 Meter.

Raymarine RayNet to SeaTalk HS Network Cable 10 Meter

The Raymarine SeaTalk NG Cable Kit comes with all of the parts you need to start a Seatlk NG Network.

This Furuno Cable will allow you to connect two network units together or connect to a network hub.

The Lowrance 25ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 1 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 5 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 20 Meter.