Mounts & Brackets

The Shakespeare 6187 is a full 4D range of motion ratchet mount that provides maximum mounting location flexibility. The 6187 can be installed at extreme angles and is made of stainless steel.

The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Does Not Include Starlink, Sold Separately

The Seaview 5” Forward Mount with Plate Bundle is designed for Starlink Antennas. This mount features a pre-dimpled hole pattern and water-tight gasket in the center of the plate that allows for easy routing of the Starlink cable.
Does Not Include Starlink, Sold Separately

Flush mount your 5-inch Lowrance Eagle display with the dash mounting kit!

The Seaview Light Bar is a 1.25" diameter aluminum tube powder coated white to match your Seaview Modular Mount. Move your Navigation light above your radar so you can be seen during night hours.
Color: Black

Mount your Superior Life-Saving Offshore Stream 4-Person Liferaft or Superior Life-Saving Coastal Surge 6-Person Liferaft with this low profile stainless steel mount.

Flush Mount Kit for Garmin 400 Series.

Furuno Display Mounting Knob - 2 pieces required

Gimbal bracket for All HDS12 Touch Gen2, and HDS12 Carbon Models.
Comes with Knobs

Garmin's Flat Mount kit for GPSMAP 547/547xs and echoMap 50s series give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.

Flush Mount Kit for Garmin GPSMAP 547, 547xs & echoMap 50s Series.

Second Mounting Station for Garmin GPSMAP 547/547xs and echoMap 50s Series. Bracket and Wiring harness included.

Replacement Tilt / Swivel Mount for GPSMAP 547, 547XS and echoMap 50s Series.

Garmin Flat Mount kit for echoMap 70 series and GPSMAP 7x1 / 7x1s series. Give your unit a sleek, custom look by mounting your unit into a flat panel. Mounting kit includes hardware, installation instructions and a template. Full access to the back of the mounting surface is required for this mount.

Replacement Garmin Tilt/Swivel Bail Mount with knobs for GPSMAP 7x1 / 7x1s series and echoMap 70s.

Second Mounting Station for Garmin GPSMAP 7X1/7X1s and echoMap 70s Series. Bracket and Wiring harness included.

The Garmin Step Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer in the step of your boat.

The Garmin Jack Plate Mount for 4, 8, or 12 Pin Transducers allows you to mount a transom mount transducer to the jack plate on your boat.

Furuno Display Mounting Knob - 2 pieces required.

Furuno's TZTL15F Bracket Mount and Knobs. Mount your TZTouch 2 15" display to a flat surface with this bracket with adjustable angle for optimum viewing.

Furuno's TZTL12F Bracket Mount and Knobs. Mount your TZTouch 2 12" display to a flat surface with this bracket with adjustable angle for optimum viewing.

Garmin Bail Mount and Knobs for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.

Garmin Flush Mount for GPSMAP 7407, 7407xsv, 7607 and 7607xsv.

Garmin Bail Mount and Knobs for GPSMAP 7408, 7408xsv, 7608 and 7608xsv.

Garmin Flush Mount for GPSMAP 7408, 7408xsv, 7608 and 7608xsv.

Garmin Tilt/Swivel Mount for STRIKER 4 Series Fishfinders.

Flush Mount your Garmin STRIKER 4 with this kit. Includes Mounting Template, Hardware and Instructions.

Flush Mount your 9" echoMAP / echoMAP CHIRP units with Garmin's Flush Mount Kit. Kit includes hardware, installation instructions and a template. Compatible with Garmin echoMAP 9xsv and echoMAP CHIRP 9xsv units.

Flush Mount your 4" echoMAP / echoMAP CHIRP unit with Garmin's Flush Mount Kit. Kit includes hardware, installation instructions and a template. Compatible with Garmin echoMAP 4xdv, echoMAP CHIRP 4xdv and echoMAP Plus 4xcv units.

Garmin Flush Mount for STRIKER 5dv/5cv and STRIIKER Plus 5cv Fishfinder. Includes mounting hardware, instructions and template.

Looking for a replacement or additional mount for your 5" echoMAP unit? The Garmin tilt/swivel mount provides for optimum viewing and provides Quick cable disconnect feature. Compatible with echoMAP CHIRP 52/53/54/55dv models.

Flush Mount your Raymarine Dragonfly 7 PRO with the A80347 Kit.

Secure your Striker Plus 9sv with this compatible tilt mount.

The Seaview Forward Raked Radar Mounting Base is not only stylish but also very sturdy and provides a base to mount the Seaview Radar Plate to.
*Mounting Plate Required.

If your smartphone can be charged wirelessly then the Scanstrut Rokk Wireless Edge Phone charger is a must have*. Not only will you be able to secure your phone easily but you will also not have wires hanging around to catch on things. With the Wireless Edge you also have the ability to adjust viewing angle. This 10W charger is 60% faster than previous models! 

Fusion Retro Fit Kit to mount an RA770 in the cutout for an older Fusion 600/700 stereo

The Lowrance ActiveTarget Trolling Motor Scout Mount is compatible with Lowrance ActiveTarget Live Sonar systems and allows for Scout sonar views!

Lowrance ActiveTarget Live Sonar System Sold Separately.

Ultra heavy duty mast mount designed with adjustable rails to make sure your radar can be mounted as close to your mast as possible. Compatible with Furuno DRS4W Wireless Radar and SiTex T760 Radars.

The Seaview 4-Degree Base Wedge fits mount base dimensions of 10" x 10". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.

The Seaview 4-Degree Base Wedge fits mount base dimensions of 7" x 7". This wedge features pre-drilled mounting holes that allow for quick and easy installation and are made from a marine-grade polymer.

The Seaview Aft Raked Radar Mounting Base is both stylish and sturdy. Add a Seaview Radar Plate for a complete mount solution.
Radar Plate Required and Sold Separately

Furuno mounting bracket for TZT3 16" displays. Includes bracket mount and knobs.

Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models

Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 7x3 into the existing cutout of a GPSMAP 7x2 or 7x2 Plus using this Garmin adapter plate. 

Seaview stainless steel Starlink adapter to mount to a 1"-14 threaded post.

Seaview 316L Stainless Steel Starlink adapter to mount to a 1"-14 threaded post & Stainless Steel Fixed Base.

Seaview 316L Stainless Steel Starlink adapter to mount to a 1"-14 threaded post & Stainless Steel Ratchet Base.

Seaview 316L stainless steel Starlink adapter with a 1"-14 threaded fixed base on ¼” aluminum plate. Machined to fit the Starlink Antenna Post.