Raymarine Accessories

Raymarine's A80490 adapter cable is required for all CPT-S tranducers to connect to an Axiom RV, Axiom Pro S, Axiom 2 Pro S and an Axiom Pro RVX. 9 pin connection from CPT-S transducer will plug into the 25 pin connection on the MFD.

The Raymarine EV-1 is an evolution autopilot sensor core for traditional steering systems. This intelligent EV sensor core monitors vessel motion in three dimensions.

Raymarine Replacement Rudder Reference Transducer compatible with Raymarine and Autohelm autopilot systems.

The Raymarine Masthead System provides accurate wind speed and direction. Includes Masthead only. Compatible with ST60+.

Raymarine RayNet to SeaTalk HS Network Cable 10 Meter

Raymarine SeaTalk Ng to DeviceNet (NMEA2000) Female Adapter Cable

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 3 Meter.

Network two Raynet devices together with the Female/Female Cable. Length 2M

Raymarine SeaTalkNG T-piece connector.

Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.

Raymarine Converter kit allows select SeaTalk 1 devices to interface and communicate on the SeaTalk NG data network. Plug and Play insallation.

Replacement Speed Wheel for P66 Transducers.

Raymarine's Raystar 150 10Hz replaces the RS130 and offers a GPS/Glonass Receiver that provides faster performance and enhanced accuracy. RS150 is SeaTalkNG Compatible and NMEA2000 Certified with optional devicenet adapter. Designed for Pole Mounting.

Raymarine's RMK-10 Remote is a wired keypad that provides full control of Axiom, aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) with dedicated keys for Home, Menu, Zoom In/Out, Window Control, Waypoint Management, power/brightness and even Evolution Autopilot Control. 
Portrait and Landscape Orientation

The Raymarine STng (Male) to DeviceNet (Female) snap-on spur adaptor allows for easy connection to NMEA2000 devices.

The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.

Raymarine SeaTalkNG to NMEA2000 Female Backbone Adapter

Protect your Raymarine Element 9 from scratches and sun when not in use!

Raymarine SeaTalkNG to NMEA2000 male Backbone Adapter

The Raymarine RNS-5 network switch allows for easy expansion of Raymarine systems using RayNet high-speed Ethernet cabling. Need more than 5 ports? Two RNS-5 switches can be daisy-chained together for larger systems.

Raymarine's RCR-1 USB microSD card reader provides remote microSD access to Axiom, Axiom+, Axiom Pro, Axiom Pro 2, and Axiom XL chartplotter displays. Designed to make accessing the microSD card slot easier, The RCR-1 is recommended for Axiom and Axiom+ installations when the rear microSD card reader is not readily accessible. Axiom XL installations require an RCR-1 or RCR-SD USB for microSD card access.

The Raymarine Ray 90 2nd Station Wireless Bundle includes the Raymarine Wireless Handset and Charger, Active Wireless Speaker and is compatible with the Ray 63/73/90/91 VHF Radios.

Raymarine SeaTalk HS Dual End Weatherproof Network Cable 1.5M

Raymarine Seatalk High Speed 1.5m Cable

Raymarine Seatalk High Speed 5 Meter Cable

Raymarine RayNet to SeaTalk HS Network Cable 1 Meter

Raymarine RayNet to SeaTalk HS Network Cable 3 Meter.

The Raymarine SeaTalk NG Cable Kit comes with all of the parts you need to start a Seatlk NG Network.

Raymarine 3M SeaTalk Interconnect Cable

Raymarine Adapter cable for DSM300 to DSM25. Allows the A-Series fishfinders (DSM25) to work with the Digital Sounder Module (DSM30/300) series transducers

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 400mm.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 1 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 5 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 20 Meter.

This Raymarine Cable is used as your SeaTalk NG Backbone Cable. Length 9 Meter.

3 Meter Transducer extension cable for your DSM30/300.

5 Meter Transducer extension cable for your DSM30/300.

Connect two standard Raynet cables together with the Male to Male Cable Joiner. Length 50mm

Network two Raynet devices together with the Female/Female Cable. Length 10M

Network two Raynet devices together with the Female/Female Cable. Length 5M

Network two Raynet devices together with the Female/Female Cable. Length 20M

This cable is used to connect units with RayNet networks to speak with units with SeaTalk HS networks.

SeaTalk NG power cable to power your SeaTalk NG Network.

Intergrate NMEA2000 components with a SeaTalkNG backbone with the T12217 cable kit.

The Wireless Smart Controller gives you full onboard control of your SeaTalk autopilot and will comunicate with the autopilot even if you are below deck.

The Raymarine SeaTalk NG Starter Kit includes all the pieces necessary to create a SeaTalk NG network on your boat.

Raymarine's Seatalk NG Terminator is used to begin or end your Seatalk NG Network Backbone.

Network two Raynet devices together with the Female/Female Cable. Length 400mm