Marine Accessories

Flush Mount kit for Garmin echoMAP Plus and UHD 62cv, 63cv, 64cv and 65cv.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv.

Garmin Flush Mount Kit for STRIKER Plus and STRIKER Vivid 4 and 4cv Units.

Garmin's GT10 Thru Hull Temp sensor provides accurate temperature readings from -13°-140°F in your baitwell, livewell or the waters your fishing. Simple Plug and Play integration with your NMEA2000 network.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and echoMAP UHD 72sv, 73sv, 74sv and 75sv.
7" echoMAP Plus SideVu (sv) Models only!

Give your 9" echoMAP Plus or echoMAP UHD unit a sleeker look with the Garmin Flush Mount Kit.

Navico Quick Release Bracket for Lowrance HOOK2 4" and 5" Displays, HOOK Reveal 5" Displays and Eagle 4x Display.

Raymarine's A80490 adapter cable is required for all CPT-S tranducers to connect to an Axiom RV, Axiom Pro S, Axiom 2 Pro S and an Axiom Pro RVX. 9 pin connection from CPT-S transducer will plug into the 25 pin connection on the MFD.

Lowrance Gimbal bracket for All HOOK2 and HOOK Reveal 9" Units. Includes Knobs.

Lowrance 10' Transducer Extension for Hook2 SplitShot and TripleShot Transducers. Compatible with Lowrance Hook2/Hook Reveal 5", 7" and 9" Splitshot and TripleShot GPS / Fishfinders as well as 5", 7" and 9" Simrad Cruise Units.

The Lumishore EOS i-Connect Hub makes installation of your Lumishore EOS SMX153 RGBW lights a breeze. Advanced junction box connects up to 4 SMX153 lights for simple plug and play connections.

Lumishore's SUPRA i-Connect hub Switch works with the SUPRA SMX i-Connect Hub to control your SMX53 Lights. This low-profile dash mounted all in one on/off/momentary switch allows you to switch between light colors, Fade colors, strobe colors in 2 speed and adjust brightness. (Requires i-Connect Hub Junction Box to work)

The SUPRA SMX i-Connect Hub from Lumishore makes installing, operating and incorporating full light control of your SMX53 Lights a breeze. Centralizing all light and switch connections, this Hub pairs with the SUPRA i-connect switch for full control.

Lumishore's SMX94 with 6,000 fixture lumens and 90° beam of light combines simple installation and color control with full spectrum RGBW color change lighting. Only 70mm in diameter the SMX94 lights can be mounted nearly anywhere!

The SMX154 RGBW Full Color Change lights from Lumishore are a great add on for most boats. Water Ingress Rating of IP68, 7,000 Fixture lumens and a 90° beam angle. *Additional Parts Required Depending on Desired Use.

Raymarine 8M Transducer Extension Cable for Raymarine RealVision Transducers.

High capacity 2550 mAh intrinsically safe SBR45LIIS Lithium-Ion battery for Standard Horizon HX400IS Handheld VHF. (replaces old part number FNB-V115LIIS and SBR-29LIIS).

The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.

The GRID 20 from Garmin allows remote access to your entire Garmin marine system. Includes a 360° joystick with rotary knob and push to select button control. Available in Vertical or Horizontal orientation.

The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.

Raymarine's A80542 Passive Speaker pairs with your wired handset to provide crystal clear audio from your compatible VHF. Rugged and Waterproof.

Pair the HV-300 Thru-Hull transducer pair with your Raymarine element for excellent underwater images and accurate water temperatures. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat! *Designed for Boats with over a 6° Deadrise

Make upgrading from a legacy E90W to an Axiom Pro 9 a breeze. With this installation adapter plate you can fit your Axiom Pro 9 in the existing spot of your E90W.

The ACR RCL-85 LED Searchlight with 240,000 candela using 6 High Flux (30W) LED’s provide over 1/2 nm of lighting. Simple Install – connect to 12 to 24 volt power and you’re ready to go! Includes wireless handheld remote to rotate light 350°.

Navico SS75 600W medium frequency CHIRP transducer, 9-Pin XSONIC, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

Garmin's ECHOMAP Plus 7xsv Boat kit comes with everything you need for a second station setup. Includes GT52HW-TM Transducer, Tilt/swivel mount with quick-release cradle and Power/data cable.

The Standard Horizon FBA-40 Alkaline Battery Tray allows you to use Alkaline batteries in your HX380 VHF Radio.

Standard Horizon SHC-20 Nylon Case for HX380, HX400 and HX400is Handheld VHF Radios

The Garmin gWind Transducer provides True Wind Speed and True Wind Angle information to your NMEA 2000 compatible Garmin chartplotter. The gWind has a three-bladed propeller for accurate True Wind Speeds and its twin- fin design gives a more stable True Wind Angle.

Power and connect your GPSMAP 8600 series chartplotter with this 6-foot, 2-pin power/data cable.

Get the latest software update available from Garmin GPSMAP Series with this pre-programmed SD card.

The Actisense 8-port self-contained NMEA 2000 network makes installing a NMEA 2000 system easier than ever. The SBN-2 is a complete 8-port NMEA network that includes built-in termination resistors. Simply attach the integrated 3-meter power cable to the boats power supply and you are ready to add your devices!

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 10" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.

Take full control of your Lumishore lighting directly from your MFD or internet-compatible display device. Simply connect Command Center to the MFD and/or Display with a single plug-&-play cable to create a centralized control platform for the entire vessel,

The Icom OPC1465 is a shielded control cable used to connect the AT140 tuner to the Icom M803 Single Side Band Radio.

Icom Alkaline Battery pack for M37

The Furuno MCU005 Keyboard for TZTL12F, TZTL15F and TZT2BB only. Please note, Not for NavNet TZtouch or NavNet 3D.

Garmin's Panoptix Livescope system with Ice Fishing Kit pairs with a compatible Garmin ECHOMAP or GPSMAP display and includes a GLS 10 Sonar Black Box, Panoptix LVS32 Transducer with 20' Cable, Pole Mount, Power Cable and Portable Fishing Kit which contains a bag with handle, rechargeable battery and battery charger.

Pair the JCU-2 with compatible FLIR cameras for full control! Wake the system or put it in standby, control the pan and tilt movement, zoom the camera, control cameras modes and more!

Boost your sonar power with the Furuno DI-FFAMP! Pair with the TZT3 series of GPS/Fishfinders to increase your power to a 2/3 kW Fish-finder! High powered CHIRP provide strong & clear echoes at every depth range, displaying fish targets and bottom structure with exceptional clarity.

The ACR RCL-100 LED Searchlight is designed with 220,000 candela of light providing high intensity lighting in dark and low light conditions. Rugged Design with Die Cast Aluminum Casing and Wired Remote Control operation enabling users a 360° rotation at fast or slow speeds. Includes Master Controller, Wi-Fi Remote Control for Mobile Devices, and Wired Point Pad Controller.

Garmin Trolling Motor Mount for GT36UHD and GT56UHD Transducers. Can be used as a secondary mount or replacement as this is the same trolling motor mount that came with the GT36 and GT56 originally.

Position your Panoptix LiveScope LVS32 transducer on this 0° pole mount for an optimal viewing angle while ice fishing or open water fishing!

Raymarine SeaTalkNG to NMEA2000 Female Backbone Adapter

Protect your Garmin GPSMAP 10x2 series GPS display from scratches and sun when not in use!

Protect your Raymarine Element 9 from scratches and sun when not in use!

Protect your Raymarine Axiom/Axiom+ 9 from scratches and sun when not in use- for trunnion mounting.

Protect your Raymarine Axiom/Axiom+ 7 from scratches and sun when not in use- for trunnion mounting.