Lowrance Accessories

The Navico B164 20 1kw Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element is perfect for trailered boats with deadrise between 16 and 24 degrees. Includes Lowrance Blue connector Mix and Match Cable, temperature sensor and does not need Fairing Block.
(Depth/Temp)

The Lowrance Transom Mount Skimmer Transducer, HST-DFSBL has a sleek design for better water flow which leads to more accurate depth readings. 50/200khz Dual Frequency. Compatible with Lowrance Blue Connector and Simrad NSS/NSE/BSM-1.
(Depth/Temp)

The Lowrance 50ft Ethernet Cable connects Lowrance HDS units to other Lowrance Network Devices.

20' Transducer Extension compatiable with all Lowrance and Simrad units with Blue Connector.

For mounting the Lowrance HDI Skimmer Transducer - 83/200 & 455/800 kHz.

View Video on Your Compatible Lowrance HDS Gen2 Touch 9 and 12" units and HDS Carbon.

Replacement Speed Wheel for P66 Transducers.

Lowrance Flush Mount kit for Lowrance Elite and Hook 7 Series GPS and Fishfinders.

Provide Protection for your Lowrance Elite 4x, Elite 4, Mark 4 or Hook 4 and 4x GPS/Fishfinder with this Suncover. *Compatible with HDI Series of units only.

Navico 10-Foot 12-PIN Transducer Extension cable for StructureScan 3D Module and 3D Bundles. Includes 2 10' (3M) cables.

Protect your Lowrance Link-6 VHF Marine Radio with the 000-14054-001 Suncover.

Protect your Lowrance HOOK2 and HOOK Reveal 5" Display from the elements with this Sun Cover. Compatible with 5" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 5" Displays.

Protect your Lowrance HOOK2 4x Display from the elements with this Sun Cover. Compatible with HOOK2 4x units.

Lowrance Gimbal bracket for All HOOK2 and HOOK Reveal 9" Units. Includes Knobs.

Lowrance 10' Transducer Extension for Hook2 Bullet Skimmer. Compatible with Lowrance Hook2 4x Fishfinder.

Navico SS75 600W medium frequency CHIRP transducer, 9-Pin XSONIC, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

Lowrance 7 Pin Transducer to Hook2 and Reveal Fishfinder Adapter Cable.

Protect your Lowrance Elite 9 FS display from scratches and sun when not in use!

Protect your Lowrance HDS 9 LIVE display from scratches and sun when not in use!

Use this wire block to adapt your bare wire transducer to a 9-Pin X-Sonic connector.

Lowrance Gimbal Bracket and Knobs, compatible with HDS9 Gen3, HDS9 Gen2 Touch, Elite and HOOK 9" Models

The Active Imaging HD 2-in-1 Transducer provides high-definition views of SideScan and DownScan Imaging. The HD 2-in-1 is an ideal add-on for those with an existing CHIRP transducer. Compatible as a direct connection with the Lowrance HDS PRO series. Compatible with HDS LIVE, HDS Carbon, Elite FS and Simrad NSSevo3S, NSS evo3 and GO series displays with the addition of an S3100 module (Sold Separately).

The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.

Protect your Lowrance Eagle 4x Fishfinder from the elements with the Lowrance protective cover!

Protect your Lowrance 7-inch Eagle display from the elements with the Lowrance protective cover!

Flush mount your Lowrance Eagle 4x display with the dash mounting kit!

Navico's emergency Man-Over-Board (MOB) button is simple to install and connects to your compatible device via NMEA2000. By simply pressing the button, a MOB waypoint will automatically be created and provide navigation data to reach the MOB position.

The Lowrance FreeSteer Remote provides full 360 precision steering of your Lowrance Recon Trolling Motor. The FreeSteer's revolutionary positional control has unique jogging abilities. Execute diagonal jogs in 8 directions with ease! Move anchor positions freely without having to re-anchor your boat.

Featuring a detachable and programmable lower keypad, the Advanced Wireless Trolling Motor Foot Pedal allows for convenient and intuitive control of your Recon Trolling Motor.

The Lowrance Weedless Prop is compatible with Freshwater and Saltwater Recon Trolling Motors.
Not Compatible with Ghost Trolling Motors.

The Prop Shaft Anode is compatible with Lowrance Ghost & Recon (saltwater version)  and Simrad Recon trolling motors and prevents corrosion. The Prop Shaft Anode is a ring-shaped fitting that is installed over the existing propeller nut, on the back of the propeller.
*Anode must be used on Ghost Trolling Motors when using the motor in brackish water. Using a Ghost Trolling Motor in saltwater voids the warranty regardless.
*Anode must be used on Recon Saltwater Trolling Motors.

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 1.8m (6ft).

The Green 8-Pin Male to RJ45 Cable is compatible with the NEP-3 Port Expander. Cable measures 15m (49.2ft).

The Navico Ethernet Extension cable measures 16.5ft (5m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.

The Navico Ethernet Extension cable measures 49.2ft (15m) and is designed for M12-to-M12 connections. Compatible with Lowrance, Simrad and B&G.

The ActiveTarget 2 XL Trolling Motor Shaft Mount is designed for Ghost and Ghost X trolling motors and fits round shafts from 27–33 mm. It features a cam-lock clamp for quick installation and allows easy switching between Forward XL, Down XL, and Scout XL views with clear alignment indicators for precise positioning.