Marine Accessories

The Lumishore ORA series TIX204-W Interchangeable Thru-Hull LED Underwater Light provides 5,300 Fixture Lumens and a 60° Beam. With a built-in driver and flush mount design, the TIX204 can be easily and cleanly mounted to your boat's transom, side or bottom.

Navico 10-Foot 12-PIN Transducer Extension cable for StructureScan 3D Module and 3D Bundles. Includes 2 10' (3M) cables.

The Icom HM195G Command mic IV offers full control of your Icom M400BB, M424G, M506, M510, M605, M410BB and M510BB VHF Radio from a remote location like a bridge or salon. The HM 195 can also be used as an intercom with a compatible Icom VHF Radio.

Nocqua's Super Y Connector Cable allows you to power 2 devices at once from one of Nocqua's Pro Power Packs. 24" Cable with Watertight Connections.

Furuno's MCU004 Remote provides Keyed Operation of the TZtouch and TZtouch2 and TZTouch3 displays. 10 Hardware Keys consisting of Large rotary knob with Joystick and 8 hard buttons provide near complete control of your TZtouch setup.

Furuno F-Type (Front Mount) Flush Mount Kit for Furuno GP39

Furuno S-Type (Side Mount) Flush Mount Kit for Furuno GP39

Raymarine's RMK-10 Remote is a wired keypad that provides full control of Axiom, aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) with dedicated keys for Home, Menu, Zoom In/Out, Window Control, Waypoint Management, power/brightness and even Evolution Autopilot Control. 
Portrait and Landscape Orientation

Simrad's OP50 Wired Remote for NSS Evo2, NSO Evo2 and NSS Evo3 MFD'S. The OP50 Portrait has multiple mounting options and includes a single control rotary dial and dedicated keys for MOB, Autopilot Engage/Standby, Home, Menu, Window, Mark/GoTo, Exit and Power.

Protect your Lowrance Link-6 VHF Marine Radio with the 000-14054-001 Suncover.

Simrad's OP12 wired remote provides simple integration with Simrad autopilot systems to provide mode control, course adjustments, and power steering. The OP 12 remote can be combined with the IS42 Color Instrument Display as a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.

Flush Mount kit for Garmin echoMAP Plus and UHD 62cv, 63cv, 64cv and 65cv.

Garmin Flush Mount Kit for STRIKER Plus and STRIKER Vivid 4 and 4cv Units.

Garmin's GT10 Thru Hull Temp sensor provides accurate temperature readings from -13°-140°F in your baitwell, livewell or the waters your fishing. Simple Plug and Play integration with your NMEA2000 network.

Secure your Striker Plus 9sv with this compatible tilt mount.

Protect your Lowrance HOOK2 and HOOK Reveal 5" Display from the elements with this Sun Cover. Compatible with 5" HOOK2 SplitShot and TripleShot units along with HOOK Reveal 5" Displays.

Protect your Lowrance HOOK2 4x Display from the elements with this Sun Cover. Compatible with HOOK2 4x units.

Lowrance Gimbal bracket for All HOOK2 and HOOK Reveal 9" Units. Includes Knobs.

Lowrance 10' Transducer Extension for Hook2 Bullet Skimmer. Compatible with Lowrance Hook2 4x Fishfinder.

Lumishore's SUPRA i-Connect hub Switch works with the SUPRA SMX i-Connect Hub to control your SMX53 Lights. This low-profile dash mounted all in one on/off/momentary switch allows you to switch between light colors, Fade colors, strobe colors in 2 speed and adjust brightness. (Requires i-Connect Hub Junction Box to work)

The SUPRA SMX i-Connect Hub from Lumishore makes installing, operating and incorporating full light control of your SMX53 Lights a breeze. Centralizing all light and switch connections, this Hub pairs with the SUPRA i-connect switch for full control.

The Standard Horizon SCU30 is a wireless access point that provides the ability to add up to 4 RAM4/RAM4X Wireless Microphones.

Lumishore's SMX94 with 6,000 fixture lumens and 90° beam of light combines simple installation and color control with full spectrum RGBW color change lighting. Only 70mm in diameter the SMX94 lights can be mounted nearly anywhere!

High capacity 2550 mAh intrinsically safe SBR45LIIS Lithium-Ion battery for Standard Horizon HX400IS Handheld VHF. (replaces old part number FNB-V115LIIS and SBR-29LIIS).
Can not ship via air service, must ship ground service only!

The Garmin Verado Adapter Kit is used for plumbing your Garmin Hydraulic Autopilot to your Mercury Verado Engine Steering System.

Raymarine's A80542 Passive Speaker pairs with your wired handset to provide crystal clear audio from your compatible VHF. Rugged and Waterproof.

Pair the HV-100.02 Transom Mount transducer with your Raymarine element for excellent underwater images and water temperature. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat!  Replaces A80603.

Pair the HV-300 Thru-Hull transducer pair with your Raymarine element for excellent underwater images and accurate water temperatures. Using multiple frequencies of 200kHz/350kHz and 1.2Mhz this transducer will provide detail to 900' below your boat! *Designed for Boats with over a 6° Deadrise

Make upgrading from a legacy E90W to an Axiom Pro 9 a breeze. With this installation adapter plate you can fit your Axiom Pro 9 in the existing spot of your E90W.

The ACR RCL-85 LED Searchlight with 240,000 candela using 6 High Flux (30W) LED’s provide over 1/2 nm of lighting. Simple Install – connect to 12 to 24 volt power and you’re ready to go! Includes wireless handheld remote to rotate light 350°.

The Garmin SmartPump V2 Hydraulic Autopilot Pump for Reactor 40 Pilots provides a smaller footprint with the same power and efficiency as previous versions.

Navico SS75 600W medium frequency CHIRP transducer, 9-Pin XSONIC, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

The Standard Horizon FBA-40 Alkaline Battery Tray allows you to use Alkaline batteries in your HX380 VHF Radio.

Standard Horizon MLS-300 External Audio Speaker in White compatible with all Standard Horizon Fixed mount VHF radios.

Standard Horizon SHC-20 Nylon Case for HX380, HX400 and HX400is Handheld VHF Radios

Furuno replacement power cable for Furuno GP1871F and GP1971F GPS/Chartplotters.

The Garmin gWind Transducer provides True Wind Speed and True Wind Angle information to your NMEA 2000 compatible Garmin chartplotter. The gWind has a three-bladed propeller for accurate True Wind Speeds and its twin- fin design gives a more stable True Wind Angle.

The Seaview Mast Mount provides a very sturdy platform for your compatible radar.

Power and connect your GPSMAP 8600 or 9x10/9x13/9x17 series chartplotter with this 6-foot, 2-pin power/data cable.

Fusion Premium 2 Way Twisted and Shielded RCA Cables. Available in 3, 6, 12 and 25 foot lengths.

Fusion Premium 4 Way Twisted and Shielded RCA Cables. Available in 6, 12 and 25 foot lengths.

Fusion MS-RCAYM 1F to 2M Premium Twisted and Shielded RCA Splitter

Fusion MS-RCAYF 1M to 2F Premium Twisted and Shielded RCA Splitter

The Icom OPC1465 is a shielded control cable used to connect the AT140 tuner to the Icom M803 Single Side Band Radio.

Icom Alkaline Battery pack for M37

Furuno Mounting Bracket for TZT3 12" Displays. Includes bracket mount and knobs.

The Furuno MCU005 Keyboard for TZTL12F, TZTL15F and TZT2BB only. Please note, Not for NavNet TZtouch or NavNet 3D.

Boost your sonar power with the Furuno DI-FFAMP! Pair with the TZT3 series of GPS/Fishfinders to increase your power to a 2/3 kW Fish-finder! High powered CHIRP provide strong & clear echoes at every depth range, displaying fish targets and bottom structure with exceptional clarity.