NMEA 2000 Components

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

Garmin's SteadyCast Heading Sensor offers a simple solution to heading accuracy. Easy to Install with a 10Hz output rate and accuracy to +/- 3°

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

This Garmin cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Garmin NMEA 2000 Multiport T-Connector.

The VMH-35 features a black-glass design with stylish brushed stainless-steel ring. This new generation of sunlight readable color hybrid displays has an integrated high-performance GNSS receiver and is NMEA 2000 certified. An embedded analog to NMEA 2000 gateway eliminates the need for an additional external converter making the VMH-35 ideal for refitting with older engines!

Furuno GP330B NMEA2000 GPS Receiver is designed for pinpoint accuracy with your Furuno NavNet 3D or TZtouch Display. NMEA 2000 Network Required when installing without DRS Radar.

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

The DT820 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

The Navico NMEA 2000 Starter Kit includes all of the parts neccessary to create a NMEA2000 Network on your boat.

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 0.5 meter.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 3 Meter

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 6 Meter.

The Maretron NMEA 2000 T-Connector is a required part when adding components to your NMEA 2k network. It is installed on the backbone cable and uses one end of the T-Piece for the drop cable.

The Garmin NMEA 2000 Power Cable is used to power your NMEA 2K network through a standard NMEA2000 T-Connector.

The Garmin NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Garmin NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

Maretron is known for their high quality and durable NMEA 2000 parts, this starter kit includes: 2 T connectors, Powertap T, 2 Male Terminators, 1m Drop/Backbone Cable, and a 6m Drop/Backbone Cable. Everything you will need to start your NMEA 2K Network.

This NMEA 2000 P79 In Hull (up to 22 degree deadrise) smart sensor provides digital depth to any existing NMEA 2000 network. The P79 includes a 6 Meter NMEA 2000 cable and NMEA 2000 T Connector.

The Raymarine STng (Male) to DeviceNet (Female) snap-on spur adaptor allows for easy connection to NMEA2000 devices.

The Navico NMEA 2000 Remote Button is an easy to install button allowing for convenient placement for an emergency Man-Overboard (MOB) button. This button can trigger alerts across a NMEA 2000 system and devices.
See device compatibility below.

The 200WX Ultrasonic Weather Station provides continuous operation in all weather conditions! This all-in-one weather sensor measures apparent and true wind speed and direction, air temperature and wind chill temperature. The included 2-axis solid state compass and 3-axis rate gyro provides accurate pitch/roll data.

The resistive-type LinkUp gateway provides an easy way to convert vessel and engine information to NMEA 2000. The LinkUp device is NMEA 2000 compliant while working to replace original wiring, delivering power to both the LinkUp device and sensor from the NMEA 2000 backbone. Configuration is simple with the LinkUp Configurator App.

The LinkUp 2-in-1 Sensor combines oil temperature and pressure sensing in a single sensor! This compact sensor is designed for harsh environments and features an IP69 protection class. Values are sent over the NMEA 2000 network to your compatible display! Configurable parameters include sensor type (engine oil/gear oil), Sensor Instance and Alarm Threshold.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 1 Meter.

A NMEA 2000 Female Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Maretron NMEA 2000 Male Terminator is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Maretron NMEA 2000 Power-Tee is used to power your NMEA 2K network and measures 5 meters in length. 

The DT812 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

The Garmin NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot.

The Maretron NMEA 2000 Micro Inline Terminator can be used at the end of a NMEA 2000 backbone to terminate the backbone and still allow for a single device to be used after the terminator.

The Maretron NMEA 2000 Field Attachable Female Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The Maretron NMEA 2000 Field Attachable Male Connector is used to begin or end the NMEA 2000 Backbone. It should be installed on one side of a Micro-Tee.

The PG-700 Integrated NMEA 2000 Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.

This Maretron cable can be used as your NMEA 2000 backbone cable. Length 10 Meter. This cable can not be used as a drop cable.

Lowrance 4-Way NMEA 2000 Block is the perfect solution when networking and multiple drop cables are in close proximity. No need for multiple T- Connectors, offers a more cost effective and streamlined solution. Part # 000-12612-001 replaces part # 000-10996-001.

The Navico NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone and uses one end of the T-Connector for the drop cable.

The Raymarine DeviceNet (Male) to STng (Female) snap-on spur adaptor allows for easy connection with NMEA2000 devices.

This Maretron cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter.

The Navico NMEA 0183 Interface provides a bi-directional gateway between a NMEA 2000 network and NMEA 0183 devices. This cable provides an ideal solution for those wanting to upgrade to newer technology, sensors and devices without replacing a whole system.

The Veratron GO GPS module is a GPS/GLONASS/Galileo receiver and antenna with NMEA 2000 certification. The GO is the smallest NMEA 2000 GNSS antenna on the market with a 60.7mm diameter and small installation footprint. This 10Hz GPS receiver’s cold-start position fix is a mere 30 seconds making it a very high sensitivity GPS receiver!

The LinkUp J1939 provides an easy way to bridge CAN engine data transmitted through J1939 to the NMEA 2000 standard. The LinkUp device is NMEA 2000 compliant making vessel and engine data available for any NMEA 2000 capable display. Configuration is simple with the LinkUp Configurator App.

The VMH-35 D is specifically designed to help monitor diesel engines. This compact display is capable of showing a wide range of data from your engine, battery tank and GPS. With an embedded high-performance GPS and Analog/CAN to NMEA 2000 gateway- it is an ideal addition to your marine suite or as a standalone solution!

The OceanLink 7-Inch Display is a multifunction powerhouse designed to help you monitor engine data and related sensor information. Monitor up to 4 engines with a single display! The integrated NMEA 2000 gateway easily receives data via analog or J1939 and distributes them via NMEA 2000. This versatile display is ideal for those seeking a single display for all of their vessel data!