Furuno Transducers

The Furuno Transom Mount Dual Frequency Transducer provides accurate depth, speed and temp readings for Furuno fishfinders and sounder modules. 600 Watts and 50/200khz frequencies.(Depth/Speed/Temp).

The Furuno 225T-TM904 Transom Mount Transducer provides Side-Scan functionality to your Furuno TZTouch3 12-, 16- or 19-inch display, As well as TZT10X, TZT13X, TZT16X . Furuno CHIRP Side-Scan provides images of structure offshore, inshore and along coastlines to enhance your fishing experience!

The Furuno 455kHz CHIRP Side-Scan Thru Hull Transducer Pair is compatible with NavNet TZTouchXL displays as a direct connection to TZT10X, TZT13X and TZT16X MFD's and has a stainless steel construction. This higher frequency transducer provides high resolution and impressive range.

Furuno 525TLTD20, B60-20 Low Profile Bronze Thru-Hull Transducer with 20 degree tilted element and temp. Designed to works on boats with deadrise between 16-24 degrees. Does not need Fairing Block.
(Depth/Temp)

Furuno 525T-LTD12, B60 12 Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element and temp is designed to work on boats with deadrise between 8-16 degrees. Does not need Fairing Block.
(Depth/Temp)

Furuno 520IHD, P79 Plastic Shoot Thru-Hull Transducer was designed for people that do not want to drill holes in the bottom of their boat. The 520IHD mounts inside the boat and will work on boats with deadrise up to 22 degrees.

The 165T-50/200-SS260 is a multi-beam thru-hull combo transducer for the DFF3D. Furuno's combo transducers provide 3D sonar information from the DFF3D as well as traditional sonar from either the DFF1 Sonar module or the internal sonar from the TZT2 Touch.

The 165T-SS54 is a multi-beam thru-hull transducer for the DFF3D. Included fairing block allows for installation on inboard vessels and a built-in temp sensor provides accurate water temperature.

Furuno TM185M Medium Frequency Plastic Transom Mount CHIRP 1000 Watt Transducer is perfect for outboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Medium Frequency for Depth and Temp.

Furuno TM185HW High Frequency Wide Cone Angle Plastic Transom Mount CHIRP 1000 Watt Transducer is perfect for outboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Depth and Temp.

The Furuno B275C-LH-W CHIRP Transducer is ideal in shallow to deep water applications. With its Wide Beam Angle the B275 provides 2x the coverage under the boat when compared with the other CHIRP transducers on the market today. (Low and High Frequencies, Depth and Temp) Comes with 12-Pin Connector for Furuno TZTouch 3 Series*.

Furuno SS75 600W medium frequency CHIRP transducer, 10-pin, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 16-24 degrees.

The Furuno 225T-PR904 Stainless Steel Thru-Hull Transducer Pair provides Side-Scan functionality to your Furuno TZTouch3 12-, 16- or 19-inch display. Furuno CHIRP Side-Scan provides images of structure offshore, inshore and along coastlines to enhance your fishing experience! Suitable for boats with a deadrise over 5-degrees.

The Furuno 455kHz CHIRP Side-Scan Transom Mount Transducer is compatible with NavNet TZTouchXL displays as a direct connection to TZT10X, TZT13X and TZT16X MFD's. This higher frequency transducer provides high resolution and impressive range.

Furuno Bronze Thru-Hull dual frequency 50/200kHz triducer(speed, depth, and temp). Fairing Block Included.

Furuno 527ID-IHD 1kW Transducer, M260,  with In-Hull Mounting Kit is a dual frequency 50/200 khz. Perfect for high speed fishing boats or for anyone who does not want to cut a hole in their boat's hull.
(Depth Only)

Furuno 526TID-HDD 1kW Bronze Thru-Hull Transducer with High Speed Fairing Block is a must have for any serious recreational or commercial fisherman. Broadband Technology provides excellent fishfinding and detection. 10-Pin connector for Furuno.
(Depth/Temp).

Furuno 525TID-BHD Bronze Thru-Hull 1kw 50/200 kHz. Includes High-Speed Fairing Block. The most popular choice for commercial fisherman.
(Depth/Temp)

The Furuno B164 20 1kw Bronze Low Profile Thru-Hull Transducer with 20 degree tilted element is perfect for trailered boats with deadrise between 16 to 24 degrees. Includes temperature and does not need Fairing Block.
(Depth/Temp)

The Furuno B164 12 1kw Bronze Low Profile Thru-Hull Transducer with 12 degree tilted element is perfect for trailered boats with deadrise between 8 and 16 degrees. Includes temperature and does not need Fairing Block.
(Depth/Temp)

The Furuno B117 600W Bronze Low Profile Thru-Hull Transducer works on boats with up to 7 degree deadrise. Includes temp and does not need fairing block.
(Depth/Temp)

The Furuno Plastic Thru Hull Dual Frequency Transducer provides accurate depth readings for Furuno fishfinders and sounder modules. 50/200khz. Requires In Hull Mount or fabrication of a fairing block.
(Depth Only).

The Furuno 235DST-MSE is a Thru-Hull Smart Sensor that operates at 235khz so that it will not interfere with your 200khz fishfinder. This transducer will provide numerical depth, speed and temperature readings to your compatible Furuno display.

The Furuno DT-800PSF is a plastic thru-hull smart sensor transducer that reads Depth and Temp and operates at 235khz so that it will not interfere with your 200khz fishfinder.

Furuno 526TID-HDN 1kW Bronze Thru-Hull Transducer with High Speed Fairing Block is a must have for any serious recreational or commercial fisherman. Broadband Technology provides excellent fishfinding and detection.
(Depth/Temp) Bare Ends

The Furuno B164 0 Degree 1kw Bronze Low Profile Thru-Hull Transducer with 0 degree tilted element is perfect for trailered boats with deadrise between 0 and 7 degrees. Includes temperature and does not need Fairing Block.
(Depth/Temp)

Furuno Clip-on Plastic Transom Mount Speed and Temperature Sensor

Furuno 6 Pin Bronze Thru hull Speed and Temp Sensor.

The Furuno CA50/200-12M 1kw Bronze ThruHull Transducer is a 1kw transducer that operates at 50/200 khz with a beam width of 28 degrees at 50khz and 8.5 degrees at 200khz. Does not include Fairing Block. Depth and Temp only.

The 165T-TM54 is a multi-beam transom mount transducer for the DFF3D. Compact design allows for easy installation and a built-in temp sensor provides accurate water temperature.

The 165T-B54 is a multi-beam thru-hull transducer for the DFF3D. Included fairing block allows for installation on inboard vessels and a built-in temp sensor provides accurate water temperature.

The 165T-50/200-TM260 is a multi-beam transom mount combo transducer for the DFF3D. Furuno's combo transducers provide 3D sonar information from the DFF3D as well as traditional sonar from either the DFF1 Sonar module or the internal sonar from the TZT2 Touch.

The 165T-265LH-PM488 is a multi-beam pocket mount combo transducer for the DFF3D. Furuno's combo transducers provide 3D sonar information from the DFF3D as well as CHIRP sonar from the DFF1-UHD Sonar module.

Furuno 300W Plastic Transom Mount CHIRP Transducer. Medium Frequency, Depth and Temp.

Furuno SS75 600W medium frequency CHIRP transducer, 10-pin, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 0-7 degrees.

Furuno SS75 600W medium frequency CHIRP transducer, 10-pin, low profile, Stainless Steel thru-hull housing for vessels with deadrises of 8-15 degrees.

Furuno B785M Medium Frequency Bronze Thru-Hull CHIRP 600 Watt Transducer with high-speed fairing block is perfect for inboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder.  Depth and Temp.

Furuno SS75H High Frequency 0° Stainless Steel Thru-Hull CHIRP 600 Watt Transducer. Flush Mount, Depth and Temp.

Furuno SS75H/12 High Frequency 12° Stainless Steel Thru-Hull CHIRP 600 Watt Transducer. Flush Mount, Depth and Temp.

Furuno B285M Medium Frequency Bronze Thru-Hull CHIRP 1000 Watt Transducer with high-speed fairing block is perfect for inboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Medium Frequency for Depth and Temp.

Furuno B285HW High Frequency Wide Beam Bronze Thru-Hull CHIRP 1000 Watt Transducer with high-speed fairing block is perfect for inboard boats looking to take advantage of Furuno's high quality CHIRP fishfinder. Depth and Temp.

Furuno B175 1kW high frequency CHIRP transducer, 10-Pin, low profile, bronze thru-hull housing for vessels with deadrises of 0-7 degrees.

Furuno B175 1kW high-wide frequency CHIRP transducer, with 10-pin Furuno plug. Low profile, bronze thru-hull housing for vessels with deadrises of 0-7-degrees.

Furuno B175 1kW high-wide frequency CHIRP transducer, with 10-pin Furuno plug. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.

Furuno B75 600W medium frequency CHIRP transducer, 10-pin, low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Furuno 12-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Furuno 165T/275LHW-12P 1kW wide beam CHIRP transducer, 12-pin. Pocket mount combo transducer for DFF3D. Requires a DFF3D and compatible TZTouch3 display.

Furuno 165T/265LH-PM488-12P 1kW wide beam CHIRP transducer, 12-pin. Pocket mount combo transducer for DFF3D. Requires a DFF3D and compatible TZTouch3 display.