Free 2-Day Air on Thousands of Items!
Don't drill holes in your transom! Stern Saver keeps your transom free of transducer mounting bracket holes. The included adhesive creates a bond between the polyethylene block and the fiberglass of your boat.
The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.
ACR HemiLight 3 high intensity flashing PFD light.
The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.
The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 9-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.
PropSpeed's FoulFree Transducer Coating Kit is the biggest advancement in transducer paint and coatings in the last 30 years. It will keep your thru-hull or transom mount transducer free of marine growth. This nontoxic formula has zero leaching of harmful chemicals into water unlike traditional anti-fouling bottom paints and is certified by Airmar.
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 3 feet long (1 meter).
Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.
Standard Horizon MMB-84 Flush Mount Kit for Fixed Mount VHF Radios
Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.
Shakespeare 4188SL SS Rail Ratchet Mount fits 1 to 1.5 inch rail.
Provides a neat, water resistant installation for RG-8/AU, 8X, 58, 59, 213 and Shakespeare Lo-Max coax cables. Does not include screws.
Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).
Garmin 6' Power/Data cable for all ECHOMAP Ultra units. Includes NMEA0183 Input/Output.
Allowing you to Surface Mount your Garmin ECHOMAP Ultra 12" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.
The Actisense NMEA 2000 to USB Dual Gateway Converter is equipped with a USB cable to allow Plug and Play connectivity with a PC. The NGX-1-USB cable provides an easy way to link a PC to a NMEA 2000 network. NMEA 2000 compliant software applications can read from and write to the NMEA 2000 Bus while maintaining network safety.
Shakespeare 4187 Stainless Steel 4 Way Ratchet Mount.
Garmin Marine Network Cable (20').
The Lowrance 106-48, HST-WSU, is a 200khz transom mount transducer for depth and temp. It also comes with the transom mouting bracket and 20' cable. Compatible with Lowrance Elite 3x, 4x and Elite 5 series, (non-DSI/CHIRP/HDI series).
This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter
Raymarine's 5-Way Connector is designed to connect 3 drop cables and 2 terminators.
Standard Horizon MH-73A4B Submersible Speaker Mic for Standard Horizon HX40, HX210, HX380, HX400, HX870 and HX890.
Shakespeare 4187 Heavy Duty Stainless Steel 4 Way Ratchet Mount.
Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.
The Standard Horizon SSM-70H Wired RAM4 Mic controls all Radio and DSC Functions of the Standard Horizon GX6000/GX2400/GX1800/GX1800G/GX1850/GX1850G Series VHF Radios. Includes 23' Cable
Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv, 922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243, 1243xsv, 1543xsv.
Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
Looking for a replacement or secondary cradle for your HX210? The Standard Horizon SBH-25 is the exact charging cradle that came with your HX210. Does not include 110V charging cable, sold separately.
The SAD-25B is the replacement charging cable for the Standard Horizon HX400, HX400IS, HX870, HX890, HX40 and HX210 radios. The SAD-25B requires the use of the SBH-25, SBH-32 or SBH-36 Cradle (not included and sold separately).
Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.
Raymarine SeaTalkNG to NMEA2000 Female Backbone Adapter
Protect your Lowrance 5-inch Eagle display from the elements with the Lowrance protective cover!
This single, easy-to-install transducer provides fish-finding and structure imaging to your Recon Trolling Motor. Powerful sonar including CHIRP, SideScan and DownScan imaging all come together to provide highly detailed sonar imagery!
Directly Compatible with Freshwater Recon Trolling Motors.
Not Compatible with GHOST Trolling Motors.
Compatible with Saltwater Recon Trolling Motors, Requires 000-15327-001 Adapter Cable
Lowrance Sonar Adapter Cable, 9-Pin Mini to 9-Pin. Required for use with Lowrance and Simrad Recon Saltwater Trolling Motors.
Standard Horizon CMP460 Intrinsically Safe Submersible Remote Speaker Mic
The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.
Raymarine Converter kit allows select SeaTalk 1 devices to interface and communicate on the SeaTalk NG data network. Plug and Play insallation.
The Lowrance HDI 83/200 & 455/800khz Skimmer Transducer.
Garmin 8-Pin Power Cable for GPSMAP 8x0, 8x0xs, 10x0, 10x0xs, 12x2 Touch, 7400, 7400xvs, 7600, 7600xsv and 1643 Series Chartplotter and Chartplotter/Fishfinder Models
Standard Horizon Lithium-Ion Battery for HX870, HX890 and HX891.
Can not ship via air service, must ship ground service only!
Use this wire block to adapt your bare wire transducer to a 12-Pin Garmin connector.
Raymarine's A80490 adapter cable is required for all CPT-S tranducers to connect to an Axiom RV, Axiom Pro S, Axiom 2 Pro S and an Axiom Pro RVX. 9 pin connection from CPT-S transducer will plug into the 25 pin connection on the MFD.
The ACR 9490.1 HydroFix Hydrostatic Release Kit is a patented system that allows a CAT I EPIRB to be quickly released from its housing when submerged in water between 1.5 and 4 meters.
The Seaview Radar Mount with Mounting Plate is not only stylish but also very sturdy and works on most radar domes. A list of compatible domes is below.
*Aft Raked Mount
