Garmin Marine Accessories

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, and GPSMAP 1242xsv Chartplotter Fishfinders.

Garmin Bracket Mount with Quick Release for 7" CHIRP CV and DV units.

Garmin Marine Network Cable (6').

Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units

Garmin Marine Network Cable (20').

Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.

Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.

Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).

Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.

Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.

Protect your Garmin GPSMAP 12x2 series GPS display from scratches and sun when not in use!

Protective cover for Garmin Echomap Ultra 2 12" Displays. Compatible with Echomap Ultra 2 Displays Only!

Garmin Heavy Duty Transom Mount with Spray Shield

Garmin Protective Cover for ECHOMAP Ultra 102sv and 106sv.

Protect your Garmin GPSMAP 9x3 series GPS display from scratches and sun when not in use!

Garmin Protective Cover for echoMap Plus and UHD 72cv/sv, 73cv/sv, 74cv/sv and 75cv/sv units.

The Garmin Livescope stainless steel transom mount allows for the mounting of your Garmin LVS34 transducer to the transom of your boat. Includes spray shield. The LVS34 transducer is included in the Garmin Livescope Plus Sonar System.

The Garmin Bail Mount with Quick Release Cradle for ECHOMAP UHD2 9-Inch SV Displays tilts for optimum viewing. All cables plug into the mount's quick release cradle making it quick and easy to remove your display while leaving all cables plugged into the cradle.

Garmin's USB Card reader with USB-C adapter cable pairs with your compatible chartplotter and accepts up to 2 Full Sized SD Cards. Simplifies access to charts, software updates and ActiveCaptain® data. Compatible with GPSMAP 16x3, 8400, 8600, 9000 and 9200 Series Chartplotter/Fishfinders.

Garmin 10 foot transducer extension cable for Garmin 12-Pin Transducers.

Garmin 30 foot transducer extension cable for Garmin 12-Pin Transducers.

Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Garmin NMEA 2000 Multiport T-Connector.

Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and echoMAP UHD 72sv, 73sv, 74sv and 75sv.
7" echoMAP Plus SideVu (sv) Models only!

Control your Garmin Reactor Autopilot right from a remote. This rugged and water resistant remote provides the ultimate onboard control and convenience. Control steering and even use the remote for heading hold and course corrections! (compatible with Compact Reactor, Reactor 40 Steer by Wire and Reactor 40 Hydraulic)

The Garmin 2-Pin Threaded Power Cable is compatible with ECHOMAP UHD2 6-Inch, 7-Inch SV and 9-Inch Displays and measures 6 feet long.

The Garmin instrument display protective cover shields your Garmin instrument display from the elements. Compatible with GHC 20, GMI 20, GNX 20, GNX 21 and GNX Wind Displays. 

Pair Garmin's wireless foot pedal with your Force, Force Pro or Force Kraken trolling motor for instant control and responsiveness. Simplified, Wireless connection yet feels and operates just like a cable-steered pedal. Operates using AA batteries or it can be hardwire installed with the optional Foot Pedal Power Cable.

Garmin's Water Resistant, Floating Handheld Remote Control with sunlight readable display provides complete control of the the Force Trolling Motors. Point and Go Gesture Steering along with User Programmable Keys for control of your chartplotter.

Stabilize your Force Trolling Motor when in a stored position with this Deck Mount Stabilizer Kit.

The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Garmin Marine Network Cable (40').

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

Garmin Power/Data Cable for 7-Pin Chartplotters. Replacement part.

Garmin's 010-11612-00 adapter allows you to connect newer 8-pin transducers to Garmin GPS Units that require a 6-pin connector.

Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv,  922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243 and 1243xsv. 

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv.

Flush Mount kit for Garmin echoMAP Plus and UHD 72cv/sv, 73cv/sv, 74cv/sv and 75cv/sv Units.

Allowing you to Surface Mount your Garmin ECHOMAP Ultra 10" GPS, this quick release bail mount includes the knobs and tilts for optimum viewing.