Garmin Marine Accessories

Garmin Bail Mount with Quick Release Bracket for 9" echoMAP PLUS 93sv and 94sv units as well as ECHOMAP UHD 93/94sv.

Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.

The Garmin NMEA 2000 Starter Kit comes with all of the parts you need to start a NMEA2000 Marine Network.

Garmin GMS 10 Network Port Expander will add 5 Network ports to your Garmin network.

Garmin Marine Network Cable (6').

Garmin adapter cable connects an 8-pin transducer with XID to a 12-pin sonar port on compatible Garmin GPS / Fishfinder units.

Garmin 4-Pin Power/Data Cable for Select 7" and 9" echoMAP CHIRP, echoMAP Plus, ECHOMAP UHD, and GPSMAP 1242xsv Chartplotter Fishfinders.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 10 feet long (3 meters).

Display Cover for ECHOMAP UHD2 52cv, 53cv, 54cv and 55cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus or UHD units

Garmin Protective Cover for ECHOMAP Ultra 122sv and 126sv.

Display Cover for ECHOMAP UHD2 72cv, 73cv, 74cv and 75cv GPS/Fishfinders.
Does Not work with Garmin Echomap Plus, UHD or UHD2 'sv' units

Protective cover for Garmin Echomap Ultra 2 12" Displays. Compatible with Echomap Ultra 2 Displays Only!

Garmin GA 38 remote gps antenna with 30' cable. Fits standard 1" marine mount.

Garmin Marine Network Cable (20').

Garmin Bracket Mount with Quick Release for 7" CHIRP CV and DV units.

Protect your Garmin GPSMAP 12x2 series GPS display from scratches and sun when not in use!

The Garmin GFS 10 Fuel Sensor provides fuel flow and fuel level measurement data. You can view this information on your compatible Garmin NMEA2000 compliant chartplotter, GPS/FF combo or GMI 10 display.

Garmin NMEA 2000 Multiport T-Connector.

Garmin Protective Cover for ECHOMAP Ultra 102sv and 106sv.

The Garmin LiveScope Bulkhead Connector Kit allows you to flush mount your LiveScope extension cable for easy connection/disconnection of your LiveScope transducer.

Garmin's mounting bracket enables you to mount your Garmin ECHOMAP UHD2 5- or 7-inch 'CV' series GPS. The Garmin bail mount is also compatible with select Garmin Striker fishfinders. See list below for full compatibility.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv.

The Garmin instrument display protective cover shields your Garmin instrument display from the elements. Compatible with GHC 20, GMI 20, GNX 20, GNX 21 and GNX Wind Displays. 

Garmin 30 foot transducer extension cable for Garmin 12-Pin Transducers.

Garmin Bracket Mount with Quick Release Cable for 7" and 9" echoMAP CHIRP SV units. Does not work with PLUS or UHD models.

Garmin's GHS 11 Wired Handset provides a 2" diagonal dot matrix display with a rotary/push knob for volume, squelch and channel selection. Offers intercom capabilities when connected to a speaker.

Garmin Protective Cover for echoMap Plus and ECHOMAP UHD 62cv, 63cv, 64cv and 65cv units.

Garmin Heavy Duty Transom Mount with Spray Shield

Garmin Bail Mount with knobs for 8416, 8416xsv, 8616, 8616xsv and 1643/1643xsv.

Protect your Garmin GPSMAP 9x3 series GPS display from scratches and sun when not in use!

Protect your Garmin GPSMAP 8x10 series GPS display from scratches and sun when not in use!

Garmin Protective Cover for echoMap Plus and UHD 72cv/sv, 73cv/sv, 74cv/sv and 75cv/sv units.

Pair Garmin's wireless foot pedal with your Force, Force Pro or Force Kraken trolling motor for instant control and responsiveness. Simplified, Wireless connection yet feels and operates just like a cable-steered pedal. Operates using AA batteries or it can be hardwire installed with the optional Foot Pedal Power Cable.

Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).

Garmin's Transom Mount bracket allows you to attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat providing excellent sonar returns at all speeds.

Airmar Kick Up Bracket for P66 transom mount transducer(replacement). Works with any Airmar P66 transducer.

Garmin Marine Network Cable (40').

The Garmin NMEA 2000 T-Connector is required for adding components to your network. It is installed on the backbone cable and uses one end of the T-Connector for the drop cable.

This cable can be used as your NMEA 2000 backbone or drop cable. Length 2 Meter

Garmin Power/Data Cable for 7-Pin Chartplotters. Replacement part.

Garmin 10' Transducer Extension Cable for 4-Pin Transducers.

Garmin's 010-11612-00 adapter allows you to connect newer 8-pin transducers to Garmin GPS Units that require a 6-pin connector.

This Garmin cable can be used as your NMEA 2000 backbone or drop cable. Length: 6 Meters (19 feet).

Garmin's 4-Pin Power/Data Cable. 6Ft Cable includes NMEA0183 inputs/outputs.

Garmin adapter cable connects a Garmin 8-pin transducer to a Garmin 4-pin display including Garmin echo, echoMAP, echoMAP CHIRP, ECHOMAP UHD2, or STRIKER™ series fishfinder.

Use this wire block to adapt your bare wire transducer to a 12-Pin Garmin connector.

Garmin Power/Data Cable for GPSMAP 722, 722xs, 742, 742xs, 743, 743xsv,  922, 922xs, 942, 942xs, 943, 943xsv, 1022, 1022xsv, 1042xsv, 1222, 1222xsv, 1242xsv, 1243, 1243xsv, 1543xsv.

Garmin Tilt/Swivel mount with Quick Release Cradle for echoMAP Plus and echoMAP UHD 72sv, 73sv, 74sv and 75sv.
7" echoMAP Plus SideVu (sv) Models only!