Airmar Mix & Match Cables

The Airmar Mix and Match cable for Garmin Low CHIRP 12-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 12-pin sonar port.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Navico 9-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a (2) Navico 9-pin plugs on the other side (Y-Cable).

The Airmar Mix & Match Cable for 600W Navico Blue is 8m in length and has a 5-pin 600W Mix and Match end on one side and a Navico 7-pin Blue connector on the other side.

The Airmar Mix and Match cable for Garmin 600W 6-Pin connects to a compatible Airmar Transducer with 5-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 6-pin sonar port.

The Airmar Mix and Match cable for Furuno CHIRP 10-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Furuno 10-pin sonar port.

The Airmar Mix and Match cable for SiTex CHIRP 8-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a SiTex 8-pin sonar port.

The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.

The Airmar Mix & Match Cable for Navico XSONIC M/H CHIRP Transducers is 1m in length connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and your compatible Navico fishfinder's 9-Pin XSONIC connector on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Bare Wires is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector on one side and provides bare wires on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 10-Pin Low Frequency Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 10-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Raymarine 11-Pin High and Medium Frequency Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Raymarine 11-pin plug on the other side. This cable is compatible with High or Medium Raymarine 11-pin CHIRP transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno CHIRP, 12-pin transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Furuno 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Furuno 12-pin plug on the other side. This cable is compatible with Furuno Single Band Low Frequency CHIRP, 12-pin transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 12-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 12-pin plug on the other side. 

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Humminbird 14-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Humminbird 14-pin plug on the other side. Compatible with Low Frequency Transducers.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Humminbird 14-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Humminbird 14-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 8-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 8-pin plug on the other side.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Garmin 8-Pin Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Garmin 8-pin plug on the other side. Compatible with Low Frequency CHIRP only.

The Airmar Mix & Match Cable for 12-Pin CHIRP Series with Navico Blue Connector is 1m in length and connects to your compatible Airmar transducer with a 12-pin Mix and Match connector and provides a Navico Blue plug on the other side.

The Airmar 10' Extension Cable for CHIRP Mix & Match Cables is 3m in length and extends the length of your Airmar Mix & Match Cable. This cable features a 12-pin Mix & Match male end, and a 12-pin Mix & Match female end. 

The Airmar 20' Extension Cable for CHIRP Mix & Match Cables is 6m in length and extends the length of your Airmar Mix & Match Cable. This cable features a 12-pin Mix & Match male end, and a 12-pin Mix & Match female end. 

The Airmar Mix & Match Cable with 600W FISO Connector is 8m in length and has a 5-pin 600W Mix and Match end on one side and a FISO connector on the other side.

The Airmar Mix & Match Cable with Raymarine DSM Connector is 9m in length and has a 5-pin 600W Mix and Match end on one side and a Raymarine DSM connector on the other side.

The Airmar Mix & Match Cable with Raymarine a-Series Connector is 9m in length and has a 5-pin 600W Mix and Match end on one side and a Raymarine a-Series connector on the other side.