Free 2-Day Shipping on Thousands of Items!
The Seaview Large Stainless Steal Cable Seal with split seal design allows for waterproof cable routing without removing connectors!
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
The Raymarine SeaTalk NG Spur Cable is used to connect individual devices to the SeaTalk NG backbone. The SeaTalk NG Spur Cable connects to a T-Connector.
Furuno AIR-033-333 Transducer Pigtail, 10-Pin(F), 2 Meters
The Garmin LVS32 stainless steel transom mount allows for the mounting of your Garmin LVS32 transducer to the transom of your boat. The LVS32 transducer is included in the Garmin Livescope Sonar System.
Position your Panoptix LiveScope LVS34 transducer on this 8° pole mount for an optimal viewing angle while ice fishing or open water fishing!
For Livescope Plus LVS 34 Transducer Only!
Use this wire block to adapt your bare wire transducer to a 9-Pin X-Sonic connector.
The Shakespeare 3187 Stainless Steel Ratchet Mount is a versatile mount with a four-way ratchet design. Designed for both vertical or horizontal mounting in mind! The 3187 mount fits standard 1"- 14 threads and features a cable slot for easy installation.
The Furuno DRS AX and NXT Signal/Power Cable is compatible with Furuno DRS AX and DRS NXT Radars. The Furuno Signal/Power Cable is a required component for your Furuno radar.
Size: 10M
The Furuno DRS AX and NXT Signal/Power Cable is compatible with Furuno DRS AX and DRS NXT Radars. The Furuno Signal/Power Cable is a required component for your Furuno radar.
Size: 15M
Protect your Simrad Cruise 9 from the elements! Simrad protective cover for Simrad Cruise 9-inch displays.
The Raymarine AR200 Augmented Reality Sensor features a Global Navigation Satellite Systems (GNSS) Receiver and Attitude Heading Reference System (AHRS) sensor and provides position, heading, pitch and roll information to compatible Raymarine displays. The AR200 also provides augmented reality features to your compatible Raymarine Axiom display.
Order Now Through July 7, 2024 and Get Up To $3,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!
The 9-to-7-Pin Transducer Adapter enables xSonic 9-pin transducers to connect to legacy 7-pin displays.
The Navico NMEA 0183 Interface provides a bi-directional gateway between a NMEA 2000 network and NMEA 0183 devices. This cable provides an ideal solution for those wanting to upgrade to newer technology, sensors and devices without replacing a whole system.
The Airmar Mix and Match cable for Garmin 600W 6-Pin connects to a compatible Airmar Transducer with 5-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 6-pin sonar port.
The Airmar Mix and Match cable for Furuno CHIRP 10-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Furuno 10-pin sonar port.
The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.
Protect your compatible Garmin VHF radio from the elements! Compatible with Garmin VHF 210, 210 AIS, 215 and 215 AIS Radios.
Metal Mounting Bracket for Simrad NSS evo3 and evo3S displays. Includes (2) knobs.
Updating your Garmin multifunction display has never been easier. Flush mount a GPSMAP 12x3 into the existing cutout of a GPSMAP 12x2 Touch, 12x2 Plus, 7412 or 7612 chartplotter using this Garmin adapter plate.
The Scanstrut Flip Pro is 12V or 24V input and is equipped with 1 Type A and 1 Type C port, providing options in the best connection and power for your device. The Flip Pro is small in size, IPX4 waterproof rated and includes a protective cap that springs closed and locks open when charging.
The Standard Horizon SSM-BT20 Bluetooth Headset is compatible with the Standard Horizon Bluetooth VHF Radio.
The Garmin 2-Pin Threaded Power Cable is compatible with ECHOMAP UHD2 6-Inch, 7-Inch SV and 9-Inch Displays and measures 6 feet long.
The ROKK Charge Pro is an IPX6 waterproof USB charger featuring USB-A and USB-C charging ports. The ROKK Charge Pro remains waterproof even while in use! Constructed from marine-grade materials, and wash-down ready, the ROKK Charge Pro is a top choice for charging in a marine environment.
The Shakespeare DORSAL VHF antenna is designed specifically for greater effectiveness in short-range applications. The fully water sealed body is durable for longtime use and the fin design prevents the antenna from getting snagged. Suitable for up to 10 mile range. Color: White.
Standard Horizon SSM 72H RAM 4X Wireless Mic and SCU30 Value Bundle includes the Standard Horizon SSM72H Wireless RAM4X Microphone and SCU-30 Wireless Access Point, compatible with the Standard Horizon GX2400 VHF Radio.
Instant Savings with Value Bundle!
The Lowrance S3100 and Active Imaging HD 3-in-1 Transducer bundle includes the standard S3100 sonar module and the Navico Active Imaging HD 3-in-1 Transducer.
Instant Savings with Value Bundle!
The Seaview 5” Aft Mount with Plate and LED Light Bundle is designed for Starlink Antennas. This bundle is ideal for those looking to incorporate a light in their Starlink mount. This mount features a pre-dimpled hole pattern, water-tight gasket in the center of the plate and a 1” thick starboard plate that easily accommodates the included light bar.
Starlink Not Included, Sold Separately
Mount your compatible Garmin LiveScope transducer to your Force Kraken trolling motor with this LiveScope mounting bracket. Conveniently route the LiveScope transducer cable through the shaft of the motor.
The Garmin Marine Network Adapter cable connects a small marine connector network cable (female) to a large connector network cable (female). The small connector side of the cable features a right angle making it easier to route cabling.
The Double Arm Wrench fits the B164 and B175 transducers and assists with installation. The Double Arm Wrench can be used in tandem with the Single Arm Holding Wrench.
The Simrad Temperature Sensor connects via NMEA 2000 and is pre-configured to output water-temperature. The sensor can be reconfigured to output other temperature types including outside, engine room, live well, refrigeration, heating and system and others! The Simrad NMEA 2000 temperature sensor can only be controlled/configured on Navico MFD's.
The Garmin BlueNet Network to RJ45 Adapter Cable connects compatible Garmin devices with a Garmin RJ45 port to the Garmin BlueNet network.
Network compatible Garmin devices with the 6 foot BlueNet Marine Network Cable.
Add the Garmin Power Receptable to your compatible Garmin Force trolling motor to add a 70A power receptacle.
The Raymarine EV-1 is an evolution autopilot sensor core for traditional steering systems. This intelligent EV sensor core monitors vessel motion in three dimensions.
Order Now Through July 7, 2024 and Get Up To $3,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!
The Raymarine RNS-8 is a network switch allowing for easy networking of your compatible Raymarine components. This 8 port Gigabit RayNet network switch includes 4 dedicated power-over-ethernet (POE) ports. Integrate Axiom displays with radars, sonar modules and FLIR thermal cameras with ease!
Order Now Through July 7, 2024 and Get Up To $3,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!
Garmin’s GPS24XD NMEA2000 GPS antenna provides multi-band GNSS accuracy to 1M. The magnetic heading sensor provides accuracy to within 3 degrees with enhanced stabilization at slow speeds. Includes under-deck, pole and surface mount options.
Color: Black
The Shakespeare PL-259-8X-G connector includes a UG176 adapter and DooDad for an RG-8X cable. The gold-plated brass better withstands the elements and minimizes signal loss associated with traditional connectors.
Extend the cable length of your Garmin Panoptix LiveScope LVS32, LVS34 or XR LVS62 transducer with this extension cable. Cable is 30 feet long (9 meters).
Fusion's NRX-300 Monochrome Wired Remote Control makes controlling your compatible Fusion Marine Stereo a breeze. Flush Mount or Dash Mount, the NRX300 offers Multi-Zone Technology allowing for full control or the option to mount a remote for each Zone, NMEA2000 Certified with a 2.6" LCD Display.
Add some extra cable to your compatible Garmin VHF radio with this 12-pin, 10-meter fist mic extension cable. See compatibility list below.
The Lowrance Eagle TripleShot transducer is designed exclusively for the Lowrance Eagle series and provides CHIRP, DownScan and SideScan imaging. DownScan FishReveal technology provides unparalleled target separation and identification!
Flush mount your 9-inch Lowrance Eagle display with the dash mounting kit!
Furuno's PG500R Heading Sensor is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading.
Icom 12 volt Cigarette Lighter compatible with Handheld charging bases BC119N, 160, 191, 193, 213.
Furuno NavNet Hub Adapter Cable, 6P(M) - RJ45(M), 0.5 Meters
Furuno NMEA Cable, 1 x 7 Pin Connector, 5 Meters
